Reviews
Front Fender Side Decal ZETA Racing
The size is too large to put on KX85Front Fender. View detail
Upgrade suspension
Good for dress-up around the rear area.:Rather than gray, it is more in tune with the color of the Swing Arm and is closer to silver. It is thick and durable. View detail
Better to check before installation.
[How is it used?
Good because it is as per Image.
Was the one you received as per Image?
A few years had passed.
Seal surface is floating.
It was deteriorating.
I should have checked before installation.
There were two pieces in the package and one of them was beautiful.
After making a cut in the paper in the Seal section of the Reverse side.
Seal floating (with air bubbles)
I found it difficult to return the product because I noticed the
I applied it, but air bubbles are still noticeable.
Was the installation difficult?
Difficult to position.
Slightly, Quantity:Pair (for Left and Right) I wonder if the position of the Gap
How was your experience with it?
Good feeling
[Included Parts:were they on?
None
[Was there anything that disappointed you?
If it's new, it should be free of air bubbles.
I think, so Decal is only the first one.
I can't see it, so after I bought it, it's overlapping.
I understand the second check.
If possible, after a few years have passed.
I just wish you could have checked.
View detail
Shape is fine.
Used on a 2023 CRF250L.
The three-part design makes it easy to install by avoiding the difference between the three sections.
Normally I wouldn't be concerned about this, but looking at the recent HRCWorks bodies (AMASeries' WorksCRF), the placement of DID and Renthal's Logo is Quantity.:Pair (for Left and Right) The DID comes on the Axle side of the Rear wheel, but this product is reversed. Earlier Works bodies have the same arrangement as this Sticker.
If you don't mind such details, it is a good idea to protect the Swing Arm.
View detail
Just a little something...
The DirtFreak stickers are special:they are shaped to fit along the front fender and can be applied on slightly uneven surfaces without any problem, have good adhesion, and are of a perfect thickness. The quality is excellent for the price. Parenthesis is definitely better than the unintelligible Sticker. View detail
For off-road scratch prevention and dress-up appearance!
The material is thick and seems to be durable. I like the design, but it is not reapplicable, so be careful! View detail
Parenthesis is better
It is thick and seems to be durable.
Parenthesis is now better.
View detail
For Dress-up
I had installed the Clear type before, but the direct sunlight made it yellowish, so this time I used Material:I chose the Carbon Style one.
It is thick Decal and seems to be durable.
Since the adhesive is strong, it must be firmly positioned and applied when installing.
It is good because it does not come off even if it gets rained on.
View detail
Thick Decal.
I put the Large size on the side cover and the Small size on the front fender of KLX125.
I have used it for 3 years and it has not peeled or faded.
It is thick and seems to be durable.
View detail
Good quality!
Good quality! The quality is good. The appearance of the shock absorber, which lacks 2%, feels full, and it feels like wearing a top-quality shock absorber!!! View detail
I put it on Swing Arm.
Because the Sticker which had been pasted before faded, Swing ArmQuantity of KLE250 as well.:Pair (for Left and Right) The size is also Match. View detail
Carbon color is difficult…
I used to use the clear type on my previous motorcycle, but I decided to use the carbon type for my new motorcycle to give it a more custom look.
In addition to the super strong adhesion like a mouse removal, the overlapping part of Clear was transparent and inconspicuous, while the gap of Carbon is not deceivable!
From the side, you probably won't notice it, but Parenthesis is good, Recommendation!
View detail
It's solid
It's pretty thick and solid, so I think it's well protected.
I bought it because I wanted to make the front fork of CROSS CUB black, but I am satisfied.
View detail
Recommendation
installed on my crf250 RALLY50 It is very effective for appearance and anti-stepping stone [Color] I used Carbon type instead of Clear You can install it without gapping if you use some Magic Etc View detail
Atmosphere up!
I bought it for Dress-up because I missed the Front fork!
The Decal itself was solid and attached with no problems
The adhesive strength is quite strong, so I don't think it will come off for a while
View detail
Fork protection and Dress-up
In purchasing this, I used it for other vehicles, I already knew the protection function and durability, so I chose this again.
The Impression of the other person is commonplace or just the vehicles of Inverted Front Fork.
I myself also use it for an inverted vehicle, I know the goodness of the product, but I think that it is structurally, how to stick to the erect of a complex appearance? I purchased it again.
First of all, it is the same until we do the surface treatment thoroughly.
Next, since there are protrusions of Caliper 's Bracket, Axle Shaft' s Bracket, Cable holder, I molded it with cardboard.
Although work proceeded easier than I had thought, when I pasted it, I could not match the Center as quickly as I could take the trouble.
Also, since it became less than 10 cm in size, we devised a suitable one.
Although I am a little bit rich, I am satisfied that I did well for myself.
Coloring is a shiny Carbon Style, maybe it was better to flatten it personally.
View detail
It is Repeat because it is also used for other vehicles.
Originally I think that it is stuck on the Inverted Front Fork, but I also tried it for the erect Outer tube.
Although it is a cylinder that the Outer was supposed to be tired when inverted, since erectness has various brackets and protrusions, it was molded and processed.
The work got back to Smooth than I thought it would be pasted.
Lower preparations are Large Off.
It is saved because the fabric is thick and easy to stick to it.
It is satisfying that you can balance Dress-up and Protect.
View detail
Tighten up
It was surprising that it was quite thick. Although pasting was not difficult, it is quite difficult to affix it without bending it to Fork.
However, Parenthesis got better at a stroke.
View detail
As expected after all this.
Since I was also wearing the DRZ that I was riding the previous time, I also purchased it for the DRZ that I am on now.
The thing itself is quite thick. I hope to be able to become a Guard to Fork accordingly.
And it's perfect for a little fashion!
For Gold Fork, Clear is the Recommendation.
If it is Black, maybe Carbon or the like is OK.
After installation, the grin can not stop.
After all StickerTune is a good one.
View detail
He wanted to improve appearance of a car body and it was purchased. Although appearance became good of course, I think that a protection effect is also a cinch in thick than expected. However, I think that it makes it difficult to stick well in co
He wanted to improve appearance of a car body and it was purchased.
Although appearance became good of course, I think that a protection effect is also a cinch in thick than expected.
However, I think that it makes it difficult to stick well in compensation for being powerful adhesive power and thick.
Or [ that it is good to enclose what / like / a thing / a memo / that wrote the skillful way of sticking ].
View detail