Reviews
Fits: HONDA MBX50, HONDA MBX50F, KAWASAKI ER-6n, KAWASAKI XANTHUS, KAWASAKI ZXR750, HONDA CB400F, HONDA Shadow Sabre, HONDA Shadow Aero, HONDA Shadow, HONDA Rebel 1100, HONDA CRF1100L AFRICA TWIN, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA RC51, HONDA CBR1000ST, HONDA CBR1000SP, HONDA CBR1000S2, HONDA CBR1000S1, HONDA CBF600S, HONDA CBR1000RR SP2
It's very conspicuous...
Nomal black caps with pinch points are tacky.... View detail
Performance up, but
It is a Level that can be installed without going to a Motorcycle shop, although it requires careful handling and installation of the O2 Sensor and the lower part of the vehicle body.
Acceleration is a little better after installation. The maximum output is increased, but it is not as smooth as the OEM.
It would be nice to be able to lower the Rear weight for FrontHopper.
As a precaution, the exhaust noise is 3 to 4 times louder than OEM by feel. Be careful not to disturb others.
View detail
Fits: HONDA CB1100, HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
Wow that's cool
The Handlebar area is fashionable and Parenthesis is nice. View detail
Fits: HONDA PCX HYBRID, HONDA PCX160, HONDA PCX
AnodizedTitanium
The sound quality has increased in bass and volume, but I don't find it annoying.
The sound was as expected.
The shape of the silencer is simple and high quality.
Coloring is also 3Pattern, so the rest is your choice.
The maximum speed has been increased and the sense of power seems to have increased.
I don't think there are any special difficulties in installation.
View detail
It's the right choice for a first-class product.
The longer you use it, the more attractive it becomes, and the older it gets, the more you become attached to it.
I think that is exactly what will happen.
If anyone is in doubt, I would recommend it.
View detail
Replacement is easy and quite goodSound
Installation was a simple process with Instruction Manual.
Sound is also quite good.
Design-wise, I think the Red Emblem is better than the Black one.
View detail
Cheaper than other companies, but good quality! OEM is heavy
I was able to purchase it for less than 10,000 yen during the sale, and since I seemed to get several times as many Points, I bought it without a second thought. At the time of purchase, there were two foreign manufacturers, MORIWAKI and Yamamoto racing, and I think MORIWAKI was the cheapest, followed by Yamamoto racing, which was about 10,000 more expensive. To be honest, I preferred the appearance of Yamamoto racing, but I chose MORIWAKI to support MORIWAKIBrand and MIERACING.
Installation is done by DIY. Instruction Manual included with the product (Also available on the web) The "How to" section is friendly, courteous, and helpful, and even includes the torque for tightening the bolt. Difficulty of work (Amateur) was easy except when removing the exhaust pipe from the catalytic converter and when installing it. The workability of the center up muffler is not as good as the center up muffler.
The sound was LARGER than I expected. I am a little worried about the next inspection, but I will trust JMCA Certified. How about for those who are concerned about neighborhood nuisance? I feel like it's getting louder, so I feel like I'm doing something wrong.
Driving feel is Quantity:Pair (for Left and Right) You will feel the weight reduction if you tilt the body of the car to swing it to the
I think you can choose between Yamamoto and MORIWAKI, but it seems that the material of the pipe part is different between Titanium and Stainless Steel, and Yamamoto is 0.1kg lighter. To be honest, I think this is a margin of error for amateurs, so you can decide based on appearance and sound preferences.
View detail
Pretty good Sound
[How is it used?
Was the one you received as per Image?
Was the installation difficult?
How was your experience with it?
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
This unique shaped and compact silencer perfectly matches the styling of the Cub
About quality and texture, I can confirm that the quality is great and that the material used for the exhaust pipe and silencer is stainless steel.About the feeling of use, This unique shaped and compact silencer perfectly matches the styling of the Cub, just looks beautiful fitted to the bike and I am happy with the sound of the exhaust that is produced which is not over powering at all.Products to buy together, I find this bike almost perfect but the addition a side stand to your cart for easier parking would not be a bad idea.Difficulty of installation, I can say the fitment of the exhaust system was very easy due to the simple design of the exhaust and the easy acess to the mounting points on the bike. Having everything included you need to complete the installation in this product also helps.Cost performance and comparison with other products, The pricing of the product is great. You receive an exhaust system that is well built using quality materials and has a unique shaped silencer. The pricing of other exhaust systems for this bike does get cheaper if you are on a budget.About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff always got back to me with any concerns I had over the entire process. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Moriwaki branding would be a nice touch
Nicely machined & fit for purpose. They screw in easily to the mounting points on the stock swingarm. Such a shame that moriwaki neglected to place their logo somewhere on this product, it would have been a nice touch. View detail
Slip-on Silencer Replacement
Slip-on Silencer replacement is easy.
Exhaust System sound is not too loud and comfortable.
View detail
In any case, it should be from a reliable Manufacturer.
To be honest, I could have chosen any stand hook, since all stand hooks are equal in performance, but I wanted to choose one made by a well-known and reliable manufacturer, so I decided to go with MORIWAKI. View detail
!!! Backbone Frame needs attention!
In case of an accident, install the Engine slider MORIWAKI Skid Pad recommended by the dealer first. I put on the engine slider MORIWAKI Skid Pad, which is recommended by the dealer, first, in case the engine slider falls over, but it is not as strong as the Engine Guard. The Bolt entered the gap and damaged the screw hole by 3mm, and I had to repair the new car with Tap. The CB1000R had a mono-backbone frame, and the technology of frame simulation by computer analysis has made a great leap forward in the past few years, analyzing even the point where the frame bends, and then developing an engine fastening method and pivot plate installation structure that does not interfere with that bending. The engine is suspended from the frame like a spine and is held in place by six bolts. I was stupid, but I wanted at least a warning in the instruction manual. Slider installation was completed. I doubt if this will protect the body from tipping over, but I hope it will prevent at least a standing fall. View detail
It looks good
The mounting bracket is a challenge to fit to the bike, but once that's on installation is easy. The airflow is noticably re-directed at an upward angle. The overall build quality is really good. After several months I'm glad to have it View detail
Fits: HONDA CB250R, HONDA MONKEY125, HONDA CBR250RR, HONDA CB300R
Neat oil cap
I purchased and installed it on the cb1100ex model I was previously riding.
Installation was possible without special tools or difficulties with disassembly and assembly.
So, after purchasing CT125, I found the same product and installed it.
It's matte black and the moriwaki logo is nice -------------------------------------------- --------------- I bought it after purchasing it on the existing CB1100EX model. Installation was possible without the difficulty of assembling special tools and decomposition. So even after the CT125 purchase, there was the same product. It's matte black and the Moriwaki logo is good Powered by Google Translator
View detail
Design-wise good
I checked the video on the web before starting the work. The coupler for the number-plate lighting line cannot be removed unless the cowl behind the seat is removed. It took a little bit of time to remove and install the Carrier Plus, but the installation was completed without any problems. After installation, I found that there is a protective tube on the exposed line from the Number Plate lighting and that there is a gap where it enters the body of the car. It looks more expensive than other products (plate type products). View detail
It looks better, but ….
Installed before summer to bring out the Accent on the feet of the REBEL 1100.
The reason why I am reviewing this now is that when I turn small on Rebel and turn on Curve, or turn on Curve with an incline, I easily touch the ground.
I thought it was just a 90mm problem, but it rubbed on the 70mm as well, so it might be easy to replace it in case of a fall….
It is very careful because it is rubbed only by lightly knocking it down in an urban curve that is not a winding.
For Rebel, which can run as good as NAKED, I say it's just a look.
View detail
Fits: HONDA Super Cub 110, HONDA Cross Cub 110, HONDA GB350 S, HONDA MONKEY125, HONDA Super Cub C125, HONDA NC700S, HONDA NC700S Dual Cluth, HONDA NC700X, HONDA GB350, HONDA NC700X TypeLD DCT, HONDA NC700X Dual Cluth, HONDA INTEGRA, HONDA NC700D, HONDA X-ADV, HONDA NM4-02, HONDA NM4-01, HONDA NC750X TypeLD DCT EP, HONDA NC750X TypeLD DCT EP, HONDA NC750X DCT EP, HONDA NC750X DCT EP
For HONDA monkey
I bought it while it was still in stock because my new color monkey125 is scheduled to be delivered at the end of the year.
I had purchased a MainFilter and a SubFilter for my last rebLe1100 and knew how great the products were, so I felt confident in purchasing them again.
My motivation for purchasing this product was the satisfaction of having a ridiculously good component on my car body, and I like the fact that the Oil is said to flow at a fast rate, so it doesn't put a strain on the Engine.
I also think that being able to clean with Parts cleaner is good for the environment.
This way I don't have to worry about cleaning the Element when I change the Oil twice a year.
However, the cosmetics are not good.
It will take more than a decade to pay for this one product, so if you replace the vehicle, remove this one as well.
The satisfaction of ownership comes once you buy it, so I think the key to success is to change your mindset before you buy it.
View detail
side cover finish~!
After purchasing the Monkey 125 motorcycle, I installed the Yoshimura Up muffler. After installing the muffler, there were a lot of empty spaces on the car stand, so I bought it to fill that space. There were other brands, but I really liked the Moriwaki lettering, horizontal pattern details, and steel silver material. Moriwaki's brand was also reliable. The price is quite expensive, but if you look at the finish and materials, it makes sense. I'll use it well. Thank you. View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Premium Quality
Easy to install. Essentially plug and play. Great contrast with the black frame of the bike for a premium look. Highly recommend! View detail