Reviews
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Premium Quality
Easy to install. Essentially plug and play. Great contrast with the black frame of the bike for a premium look. Highly recommend! View detail
I'm being dry, but ...
First of all, installation is quite troublesome, especially if the Rear Carrier and Box are installed.... WiringCover- and Boots are not included for the high price. Although the wiring retractable part is designed to minimize water intrusion during mud splashing, there is a slight gap, so the part was treated with coking. After installation, it looks more expensive than other products (in fact, it is expensive...) and Parenthesis is good. View detail
If you want to buy another company's product and cry about it later, this is the one you should start with.
Although the price is a bit expensive, it is a well-designed product considering Gold fatigue, etc.
Most of the Fender Eliminator Kits from other manufacturers are simply cut and folded aluminum plates, which are in essence an extension of the License Plate Support Plate. Therefore, if you drive off-road seriously, it will be broken in no time due to the fatigue of gold.
This MORIWAKI product is a product that uses screws to assemble small parts in 3D to prevent gold fatigue. Although the assembly work is time-consuming, it is unlikely that the license plate will break due to gold fatigue and fly off during driving. When assembling, you need to be careful to lock the screws with a product such as Locktite and to protect the thin wire from the License Plate LightLED to the socket. Anyone who can do a little maintenance can do the work.
If you are going to buy a Fender Eliminator Kit from another company, it is safer to buy this one.
View detail
Fits: HONDA CB250R, HONDA CB250R, HONDA CB125R, HONDA CB125R
The product is as expected.
I was right in choosing MORIWAKI. I would like to continue to use MORIWAKI products in the future if I like them. View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Recommended for Accent.
It only looks, but it has a sense of luxury. View detail
Nice product
Beautifully crafted swingarm plugs. A nice little addition to the overall asthetic of the bike for fans of the Moriwaki brand View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Moriwaki flame hole plug
WeBike's delivery arrived quickly and meticulously.
The build quality of the product is very good. Just remove the original frame plug and insert it as it is. There is an O-ring in the contact area, so it is fixed precisely.
After installation, the atmosphere of the bike is much more luxurious. I recommend it. -------------------------------------------------- -------- Webike's delivery arrived quickly and meticulously. The building of the product is very good. You just need to remove the genuine frame plug and insert it as it is. There is an O-ring in the contact part, so it is fixed correctly. After installation, the bike's atmosphere is much more luxurious. I recommend it. Powered by Google Translator
View detail
I do not know if it is cold.
[How is it used?
I installed it on my XJR1300C. Even though it is not listed, it is the same as the NORMALXJR, so I was able to install it without any problems.
I have installed YOSHIMURA's Oil Temperature Meter, but I could not see any change in oil temperature.
Was the one you received as per Image?
It was just as Image.
As expected of MORIWAKI, the construction was very good.
Was the installation difficult?
Mount bolt of oil cooler to quantity:It is very easy to remove the 2pcs and insert this product between them.
How was your experience with it?
I do believe that the amount of air intake has increased.
I think so because the entrance is LARGE as shown in the image.
[Included Parts:were they on?
No, there is not. The OEM Bolt is also reused for installation.
[Was there anything that disappointed you?
Not particularly
View detail
Anodised metal screen.
The overall finish & quality of the product is excellent. Please ensure you have plenty of patience available when installing the mounting brackets to the bike, as this task is rather fiddly. Some Light spill from the headlight into the (rider facing)interior of the screen does occur, but is easily ignored once you get used to it. View detail
Fits: HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SF, HONDA CB1300SB
It may look plain, but it stands out unexpectedly, so it's a good idea!
The MORIWAKIFrame Hole Plug was an item that I had wanted for some time if I had the chance, but the price was so high that I decided to purchase it this time with the vigor of singing karaoke on the Kiyomizu stage.
Material when you hold the real thing in your hand.:The aluminum has a good texture and is precisely machined by machining.
Installation is also easy, except that the existing Plating plastic cover is a little difficult to remove (since it is firmly hooked into place).
Some of you have written Reviews that are concerned about theft,
Once inserted, it is hooked up with such high precision that it is Large strange to remove it, so I don't think I will have this stolen in a short time when I am on the road or something.
I thought, "Is this just for my own satisfaction? At first, I thought it was just for my own satisfaction, but no, it is very noticeable (surprisingly so).
The 30th anniversary gold color is also available now, and I think that those who want to stand out even more should choose that color, while those who want to make a modest statement should choose the silver color. If you want to stand out even more, choose the Gold color.
The dress-up parts are easy to install, yet they make a strong statement, What's first?" It might be good for those who think it is a good idea! I hope my Review is helpful.
View detail
Fits: HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SF, HONDA CB1300SB
AppearanceParts
Only he himself grins. No one notices. View detail
Rather effective wind protection
Purchased Semi-smoke, product is solid and no complaints.
The work itself is not difficult since most of the screws are tightened with screws, but it is troublesome to insert the attached collar, and the instructions are not very clear and a little unfriendly.
Loosening and tightening of M8 screws is difficult with a normal Hexagonal Wrench, and a Short Type Wrench is necessary for secure fastening.
Also, if you put it on yourself, you may be concerned about the mounting angle and the tilt of Both SidesBracket.
After installation, I ran at various speeds up to over 100, and the wind pressure received was clearly different than without.
It may not be as effective as Screen, which is designed to protect against wind, but I found it sufficient for me.
View detail
Self-sufficiency.
It will be One point.
Lubrication Spray is easy to install.
View detail
Paint was peeling.
I bought MORIWAKI parts because I didn't want to buy inexpensive CHINA parts and have the paint on the bracket peeled off, but there was a 15mm paint peel on the left side of the bracket. It is huge. It was not invisible when I inspected the product. I lost a lot of money. View detail
Simpleis Best
Exhaust System I changed from Up Type to Down Type Exhaust System, and I like it because it is easy to make over and easy to install without missing the cost. View detail
Refreshing
I changed from Up Type Exhaust System to Down Type Exhaust System and bought this one because I liked its cost performance and atmosphere. The installation was completed in less than 10 minutes by tightening 2 bolts and the remaining 1 bolt by Clip Typhoon. View detail
Fits: HONDA CB400SUPER BOLDOR, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Casually nice
It will be nice and casual.
I am only self-satisfied, but the quality and installation are perfect, as OEMs can easily remove them.
View detail
Easy to install but …
The two-tone color gives a sense of luxury, and if MORIWAKI's custom products are used to unify the products, a sense of unity can be achieved with a subtle tab.
The "Wrinkle" is not reupholstered, so there is a limit to how much it can be pulled, and the SeatCenter will be closer to the Wrinkle. (Is it just me?)
Wrinkle that appears when you get off, so I'll try to adjust again, but be careful if you are worried about Wrinkle!
View detail
Rubber stay and Spacer are ……
The installation itself does not require that much skill, but the process of putting in Blinker's Rubber stay and Spacer is rather tough.
It is definitely not for amateurs, so ask someone in the know before you do it.
View detail
Getting down works.
Wind pressure from around 90km/h is unbearable, so it is better to use a dane that does not destroy the original style too much.
After installation, it can withstand about 110 km.
Any more than that and it would be tough without getting down, but in its bare state it was storming even if you got down, so it would be easier by a LARGE amount.
The shape looks like it would be difficult to put on without taking off the light, but with a compact tool, it is large and sturdy even with the light on.
The plating on the included bolt was cheap and I was concerned about seeing it through the gaps, so I replaced it with a BlackStainless bolt.
Note that rust has been floating on the Edge section after a while because the Bracket is steel, and it is quite angular and the paint peels off easily.
View detail