Reviews
It protects the vehicle body.
[How is it used?
We removed and replaced the Y's Gear Engine Guard (steel) that was installed 18 years ago when we purchased the car new.
It is made of steel, so it was rusting, although I never damaged it by falling.
Was the one you received as per Image?
It is a solid product that appears to be rigid.
Was the installation difficult?
I asked Right-arm in Nishi-Tokyo City, and I feel safer asking PRO to do it.
How was your experience with it?
I will know how it feels when I fall down, but I haven't fallen down yet.
I did some research and found out that unlike the steel Engine Guard, the Pad slides and protects the body of the vehicle by shaving it. I also like the fact that it is not flashy.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It would be better to have it installed by a Motorcycle shop with proper Torque management.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
unaffected and sober
I chose it for its simple appearance because it is supposed to be left on. It works well when on duty without asserting itself. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Essentials for Maintenance
Purchased to use the Racing Stand during maintenance.
Therefore, I purchased the least expensive MORIWAKI product, but there is no problem at all in using it.
On the other hand, I wonder if there is any added value in what is effective.
We use STAND made by JTrip, and the body is upright and stable, giving us a sense of security when servicing.
Highly recommended if you are not particular about the appearance.
View detail
Simple stand hook roller
[How is it used?
YamahaYZF-R1 (2CR) The stand hook is used as a Stand Hook for the
I would have been happy with any manufacturer's product, but I bought it because it was an inexpensive and reliable MORIWAKI product.
Was the one you received as per Image?
The quality and texture were absolutely perfect.
I'm not sure about the M6 Bolt, as it is a Yamaha car. (Lol)
Was the installation difficult?
It takes less than a minute to install because all you have to do is round and round with a Hexagonal Wrench.
How was your experience with it?
Simple stand hook roller.
There is nothing special to mention, but it is working fine.
[Included Parts:were they on?
Quantity as shown in the product image:It arrived as a Set.
[Was there anything that disappointed you?
Not particularly
【Review】
This stand hook roller is inexpensive and safe to use.
If you are not particularly particular about the design aspect, I would recommend it.
View detail
Moriwaki skid plate
From genuine skid plate to Moriwaki skid plate black
There is no difference in functionality, but I liked that it had the brand name moriwaki on it.
Can be installed on Ja65 2023 model. -------------------------------------------------- -------- Moriwaki Skid Plate BLACK from genuine skid plate I changed it, but there was no difference in function, but it was good to have a brand name Moriwaki. JA65 can be mounted on the model in 2023. Powered by Google Translator
View detail
Fits: HONDA CB400F (2013-), HONDA CB500X, HONDA 400X, HONDA CB500F
Effective for standstill
I had to stand and walk away once.
They protected it well.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Moriwaki branding would be a nice touch
Nicely machined & fit for purpose. They screw in easily to the mounting points on the stock swingarm. Such a shame that moriwaki neglected to place their logo somewhere on this product, it would have been a nice touch. View detail
In any case, it should be from a reliable Manufacturer.
To be honest, I could have chosen any stand hook, since all stand hooks are equal in performance, but I wanted to choose one made by a well-known and reliable manufacturer, so I decided to go with MORIWAKI. View detail
!!! Backbone Frame needs attention!
In case of an accident, install the Engine slider MORIWAKI Skid Pad recommended by the dealer first. I put on the engine slider MORIWAKI Skid Pad, which is recommended by the dealer, first, in case the engine slider falls over, but it is not as strong as the Engine Guard. The Bolt entered the gap and damaged the screw hole by 3mm, and I had to repair the new car with Tap. The CB1000R had a mono-backbone frame, and the technology of frame simulation by computer analysis has made a great leap forward in the past few years, analyzing even the point where the frame bends, and then developing an engine fastening method and pivot plate installation structure that does not interfere with that bending. The engine is suspended from the frame like a spine and is held in place by six bolts. I was stupid, but I wanted at least a warning in the instruction manual. Slider installation was completed. I doubt if this will protect the body from tipping over, but I hope it will prevent at least a standing fall. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Best Match for z900rs
To prevent the STAND from interfering with the swing arm of the z900rs, the hook is of a long type, which is something that only MORIWAKI, who is well versed in motor cycles, could have done. View detail
Safety measures as it is not full cover
Black painting with MORIWAKI logo is engraved on the surface.
Since the Chain is not Covered like the SUPER CUB 110, it was installed to prevent entrapment.
If I had to put a finer point on it, it would be great if it were a little lighter and cheaper.
View detail
MORIWAKI、Skid Pad
The product arrived earlier than expected, which was very helpful. I would like to use your service again. View detail
The Silhouette of Motorcycle is not destroyed but has a certain presence.
■About Installation
Structurally, the Level is not difficult and can be easily performed with tools.
However, since the bolts are on the engine mount side, proper tightening with a torque wrench is essential.
Then I think it would be a good idea to ask at Shop for general work Level.
Reference:Tightening Torque:44.1Nm (4.5kgf-m) *In case of ZEPHYR400X
(I don't have a Torque wrench so I asked for one at the Shop.)
About the effect
I have never fallen down wearing this, so I don't know how effective it is.
The original purpose was to”reduce”trauma Damage to the Engine block in the event of a fall,
Quickly move the vehicle off the road (originally on the Circuit's Course) and out of the travel line,
It is designed to prevent rear-end vehicles from becoming entangled.
About the appearance
The parts themselves are surprisingly large, and have a presence that can be clearly recognized when the driver straddles the vehicle.
However, when viewed as a whole, the vehicle as a whole, the Parenthesis is better with Race ish without destroying the Motorcycle's Silhouette.
View detail
Reduced damage from falls in Circuit
Fitted on a VTR250, the Quantity:Pair (for Left and Right) Both fell over at Circuit and showed defensive effects.
When both of them fell down at a low-speed corner, they slid and took the car body to Gu Label, and although the footpeg and lever were damaged, the engine was able to be applied later without any problem. The slider is longer than other manufacturer's sliders (60mm is common, but this one is 70mm), which may have been good. The price is a little high, but I think the quality is acceptable.
I also appreciate the fact that only the Slider part is available through Repair Parts. The only color available is black, but I hope they will continue to make them for a long time.
View detail
If you remove the Tandem Footpeg.
I bought it because I missed Tandem Footpeg when I removed it.
I decided on this product because I had planned to use MORIWAKI's Exhaust System from the beginning.
Jungle sells similar products at about half the price, but you can't beat MORIWAKI (laughs).
View detail
To insure against standing over.
The installation was easy, but I did one bolt on each side and one bolt pc at a time, but the bolt still did not fit properly, so I had to raise the engine a little by using a spinner handlebar or something like that, using the lever principle.
A bit expensive, but for insurance.
View detail
MORIWAKIEngineerRing is the quintessential MORIWAKIEngineerRing.
The quality was satisfactory at a slightly lower price than OEMAccessories.
We have not tried to determine the effectiveness of the system, as we will not know until we fall over.
View detail
Installed on Circuit Running
I installed it on a 2011 CBR1000RR.
We wanted to install the minimum amount of sliders necessary for circuit driving, so we installed these. The installation is done by tightening the bolt to the engine hanger bolt on both sides. When installing the slider, it is necessary to drill a hole with a hole saw or similar tool for the OEMSide cowl. The hole position was drilled according to the positioning paper included in the package, and then the hole was drilled by matching it with the actual bolt. Since I have not yet crashed, I do not know how well it will perform, but I think it will be very effective for slip downs and the like. On the other hand, I would not use it on public roads because the Damage may go to the Frame side if the Slider gets caught on a curb or something when it falls over. It takes a bit of time and effort to install, so if you are not confident about it, you should ask a motorcycle shop to do it for you.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
cheap
Cheap and this quality can be scratched with confidence.
It hangs a Y-shaped Hook and gets scratched, but that's the way it was in the first place.
I think cheap is justice, and this price is reasonable for MORIWAKI.
View detail
It's lighter than I thought and the finish is nice.
As soon as I received the car, I installed it right away.
It can be dangerous if you step into the chain.
I bought it because I have it, but the suspension load seems to be
For reasons such as stretching, I was slightly concerned.
However, it is very light and the clean finish is reassuring.
I think it can also contribute to the safety of the passenger. Satisfied ------------------------------------------------- --------- As soon as I received the car, I tried to install it. It can be dangerous if the foot enters the chain I bought it because I was there, but the suspension load I was very concerned about the increase, such as increasing. However, it is relieved with a very light and clean finish. I think it can contribute to the safety of passengers. Amazing Powered by Google Translator
View detail