Reviews
Since it is a Circuit premise
Since we are running a holiday Circuit.
It's a hassle to remove Mirror from Cowl mount every time I do so.
For Handlebar Mounting
I bought this to fill the hole in the OEMMirror that I removed.
It's cheap and highly textured.
Large I'm satisfied.
View detail
It is casually MORIWAKI.
I was not happy with the snail-like cowl mirror on my CB400SB, and when I replaced it with a handle mirror, I bought a MORIWAKI one to fill the original hole. At first I ordered a cheap one from Amazon.com, but they didn't have the color I wanted, so I decided to go all out and get MORIWAKI anyway with WebikePoint.
It is a rather nondescript cover with a black matte finish, but since it is a MORIWAKIDesign (I don't know much about it and it is not Mania), I decided to go with it. As I have said many times, it is nothing special, but I think it covers the Mirror Hall in a subtle way.
View detail
Fits: HONDA CB1100, HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
Wow that's cool
The Handlebar area is fashionable and Parenthesis is nice. View detail
When running Circuit.
Purchased to cover up the area where Mirror was removed when driving on Circuit.
Good because it looks Refreshing and Race ish.
Mirror removal is easy as you just use Bolt instead of Mirror.
View detail
To One point around Handlebar
Was the one you received as per Image?
I selected Titaniumium gold, which is a subdued color and seems to have improved the texture around the handlebar.
Was the installation difficult?
Just take it off and put it on!
How was your experience with it?
Since it was a Hexagon bolt and I was concerned about the hole, I installed a For M8 cap bolt separately.
View detail
Parenthesis good!
I was not sure what to expect, but now I have a better sense of unity and Parenthesis! View detail
Superior Clamping and Beauty
Much better clamping force than the original part, very important on an aftermarket handlebar which has a slippery coating like the gold LSL Superbike bar. The Moriwaki part is elegant in design and really attractive. Get some! I'm very happy with the selection of quality parts and speedy service from Web!ke Japan, and recommend you to my friends! View detail
JC75 in ideal handle position
Handle position too high ideally.
I am satisfied that this is one of the lowest Handlebars available for the JC75.
I don't mind but I think the paint job is weak.
The damaged area was Rust.
Exclusive design allows for easy installation.
Locking holes are also available.
Is it because I adjusted it to be as low and far away as possible?
Handlebar Stopper was not necessary.
It does not interfere anywhere.
View detail
The handlebar paint was easily peeled off, which was unfortunate.
I was very disappointed that the Black paint peeled right off.
I could not believe it was a MORIWAKI product.
The peeled areas were repaired with BlackMagic.
Handlebar height became lower and very enjoyable.
View detail
good-looking
It is a MORIWAKI product with no mistakes. I wish there was a pair of Handlebar Post on the receiving side, but … (I have not been able to recognize it, though there might be one). View detail
MORIWAKIEngineerRing TOP BRIDGE [Top Bridge]
[How is it used?
Replaced with NORMAL.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
A Socket to remove the Stem Nut and a Torque wrench are required.
How was your experience with it?
It looks good.
[Included Parts:were they on?
It is about Instruction Manual.
[Was there anything that disappointed you?
When tightened with 103N of the specified Torque, the bar of the Handlebar Lock did not stick into the Top Bridge.
After some trial and error, I found that the handlebar can be locked even when tightened at 103N by using a 2mm thick StemWasher.
Other items that would be helpful
It would be nice to have a 2mm thick StemWasher.
View detail
It is easy to install. to Racer's look and feel.
Security parts for CBR250RR MC51 for Sports competition (Mirror) I purchased this product for the removal of the
The mirror had been removed and the scratches on it were…not parenthesis looking good, so the purpose was to cover them up.
The effect was perfect and Parenthesis improved.
We have not experienced any problems with price or quality.
Order of installation
Remove the existing Mirror with a .5mm Hex.
Attach this product with a 4mm Hex.
Returning is easy in the reverse order.
It's not tight enough for the Hexagon Bolt to lick.
We feel that Bolt's condition should be closely monitored, assuming that it will be put on and taken off many times.
View detail
Re-posting for some reason, a little bit sad MORIWAKIHandlebar
[How is it used?
City & Circuit, the Position is quite good.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
Installation itself is easy. However, the paint will peel off, so be careful when installing.
How was your experience with it?
The position and texture are perfect.
[Included Parts:were they on?
No problem at all.
[Was there anything that disappointed you?
The paint is a little easy to peel off, though it would be better if it is installed with care.
Point and hang of installation
The Plus screw on the OEMBar End is hard. I used an Impact wrench to remove it.
Please be careful not to lick it.
As you can imagine, the LeftRight Switch Box hits both SIDE of the tank exactly when the handlebar is tightened.
Measures will be taken in the future.
View detail
MORIWAKIHandlebar, which was a little bit expensive
[How is it used?
Street & Circuit
Was the one you received as per Image?
Street Image
Was the installation difficult?
It's not difficult, but it's tedious, none the less....
How was your experience with it?
It is considerably better than the STD Handlebar.
Even with such a change in position, I don't get tired, especially in town.
[Included Parts:were they on?
All of them.
[Was there anything that disappointed you?
The paint peels off surprisingly easily. It should be installed with more care.
Point and hang of installation
As you can imagine, the Plus screw at the Normal bar end could not be turned by hand; it was removed with Impact.
[Notes]
This was also as you might imagine, but Switch boxQuantity:Pair (for Left and Right) Both are stiff hits.
Since we also drive on the street, we will consider countermeasures in the future.
View detail
CircuitSpec.
Used to hide the hole after Mirror was removed during Circuit run.
The Cover itself is thin, but it is sufficient to cover the hole.
View detail
It's pretty good.
The OEM Handlebar position is easy and good for city driving, but when it comes to Winding and Circuit, the Handlebar is too expensive.
Compared to the OEM, the handlebar position is almost 5 cm lower, but when you actually ride it, you can feel that it has been lowered by more than 5 cm, and the Race ish feeling has been greatly increased.
However, it is not as if riding on the street has become tougher, and it can be ridden normally. However, if you are taller, you may feel the handlebar position is too low, so your opinion may change depending on your physique.
View detail
Fits: HONDA VTR250, HONDA Monkey125, HONDA CB750, HONDA CB400H-V REVO, HONDA CB400SB, HONDA CB400SF, HONDA DAX125
MORIWAKI Handlebar Upper Holder
Item describe as advertised. Excellent Quality and packaging. Will Install it on this weekend. Thanks Webike for the great services. View detail
Fits: HONDA CB1100, HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
The Handlebar area is gorgeous!
The texture of the CNCC cut-out parts and the MORIWAKI logo are a great parenthesis. The dress-up is relatively visible to the eye, so there is a sense of satisfaction. When installing the Handlebar, be careful because the weight of the Handlebar is so great that the bar will start to bow downward as soon as the Socket Bolt is loosened. Just tighten the PunchMark of the Handlebar firmly and temporarily fix the parts in question quickly, then retighten and tighten with the specified Torque according to the instruction manual. View detail
Mirror hall concealment
When I tried out the bar end mirror, I installed it, and I was a little concerned about the bump with Cowl, but it was acceptable. View detail
Fits: KAWASAKI Ninja400, KAWASAKI NinjaZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Mirror Hole Cover
I bought this for a Circuit race. I think I can manage without it, but …… it looks better than leaving it off.
The color is black, and it is plain, but the texture is good, and the casually engraved logo mark is discreet, yet moderately assertive.
I can't use it on public roads, so I'm looking forward to the driving sessions.
View detail