Reviews
Since it is a Circuit premise
Since we are running a holiday Circuit.
It's a hassle to remove Mirror from Cowl mount every time I do so.
For Handlebar Mounting
I bought this to fill the hole in the OEMMirror that I removed.
It's cheap and highly textured.
Large I'm satisfied.
View detail
To One point around Handlebar
Was the one you received as per Image?
I selected Titaniumium gold, which is a subdued color and seems to have improved the texture around the handlebar.
Was the installation difficult?
Just take it off and put it on!
How was your experience with it?
Since it was a Hexagon bolt and I was concerned about the hole, I installed a For M8 cap bolt separately.
View detail
Parenthesis good!
I was not sure what to expect, but now I have a better sense of unity and Parenthesis! View detail
Superior Clamping and Beauty
Much better clamping force than the original part, very important on an aftermarket handlebar which has a slippery coating like the gold LSL Superbike bar. The Moriwaki part is elegant in design and really attractive. Get some! I'm very happy with the selection of quality parts and speedy service from Web!ke Japan, and recommend you to my friends! View detail
JC75 in ideal handle position
Handle position too high ideally.
I am satisfied that this is one of the lowest Handlebars available for the JC75.
I don't mind but I think the paint job is weak.
The damaged area was Rust.
Exclusive design allows for easy installation.
Locking holes are also available.
Is it because I adjusted it to be as low and far away as possible?
Handlebar Stopper was not necessary.
It does not interfere anywhere.
View detail
CircuitSpec.
Used to hide the hole after Mirror was removed during Circuit run.
The Cover itself is thin, but it is sufficient to cover the hole.
View detail
It's pretty good.
The OEM Handlebar position is easy and good for city driving, but when it comes to Winding and Circuit, the Handlebar is too expensive.
Compared to the OEM, the handlebar position is almost 5 cm lower, but when you actually ride it, you can feel that it has been lowered by more than 5 cm, and the Race ish feeling has been greatly increased.
However, it is not as if riding on the street has become tougher, and it can be ridden normally. However, if you are taller, you may feel the handlebar position is too low, so your opinion may change depending on your physique.
View detail
Fits: HONDA VTR250, HONDA Monkey125, HONDA CB750, HONDA CB400H-V REVO, HONDA CB400SB, HONDA CB400SF, HONDA DAX125
MORIWAKI Handlebar Upper Holder
Item describe as advertised. Excellent Quality and packaging. Will Install it on this weekend. Thanks Webike for the great services. View detail
Fits: HONDA CB1100, HONDA CB1300SF, HONDA CB1300SUPER BOLDOR
The Handlebar area is gorgeous!
The texture of the CNCC cut-out parts and the MORIWAKI logo are a great parenthesis. The dress-up is relatively visible to the eye, so there is a sense of satisfaction. When installing the Handlebar, be careful because the weight of the Handlebar is so great that the bar will start to bow downward as soon as the Socket Bolt is loosened. Just tighten the PunchMark of the Handlebar firmly and temporarily fix the parts in question quickly, then retighten and tighten with the specified Torque according to the instruction manual. View detail
Mirror hall concealment
When I tried out the bar end mirror, I installed it, and I was a little concerned about the bump with Cowl, but it was acceptable. View detail
Cool。
I bought it because MORIWAKI's Titaniumium gold is good.
I am satisfied with the quality and the high quality of the product.
View detail
It's neither good nor bad
I bought this because when I removed the Mirror, the place it was attached to was awkward.
There is no problem with the texture.
It also comes with 4 Bolts so you don't have to buy them separately.
I like MORIWAKI, so I am satisfied.
View detail
Fits: HONDA VTR250, HONDA Monkey125, HONDA CB750, HONDA CB400H-V REVO, HONDA CB400SB, HONDA CB400SF, HONDA DAX125
สวยงามถูกใจ ได้รับสินค้าตามรูปแบบครบตามจำนวน แพ๊คมาอย่างดี สมบูรณ์ไม่มีรอยขีดข่วน ถึงตามเวลาที่กำหนด View detail
Fits: HONDA VTR250, HONDA Monkey125, HONDA CB750, HONDA CB400H-V REVO, HONDA CB400SB, HONDA CB400SF, HONDA DAX125
One point
It's the most visible part of the ride!
It's self-fulfilling, but it's better.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
MORIWAKI
I finally installed it a year after I bought it and painted it Powder coat semi-gloss black to make it look NORMAL. It took me about 3 hours to install the stems and bearings. If you don't have the right tools and a medium level of maintenance skills, this is a tough job. The 45 is too quick and the cutting angle is too narrow. I think that the 45 is too quick and the cutting angle is too narrow, and I understand it well.I thought that it is a manufacturer who knows Z well again with the Offset that is just right for Normal fork and narrow 18-inches tire. View detail
Easy to get down
The Riding Position makes it easier to get down and I like it a lot
The brake hose will interfere with the meter case during installation
You might want to think about handling it a little bit
View detail
artist's level of painting
I was a little disappointed when I bought it for a story and it was Bar End by Fwo
I wanted to make you laugh
Quantity:I thought it was one set, but it was one Be careful what you order..
View detail
Fits: HONDA VTR250, HONDA Monkey125, HONDA CB750, HONDA CB400H-V REVO, HONDA CB400SB, HONDA CB400SF, HONDA DAX125
Very Great Quality
An easy fix. Item received in very good condition and the top clamp fits true to size. Definitely great buy and item produced by moriwaki engineering. Fixed onto my CB400SF NC42 2012. View detail
It purchased for the dress-up of the circumference of a handle up. By firm structure, the design is pleasing. Attachment was easy (only insert in). If a subtracting point is said, it will be a little high kana. . .
It purchased for the dress-up of the circumference of a handle up.
By firm structure, the design is pleasing.
Attachment was easy (only insert in).
If a subtracting point is said, it will be a little high kana.
.
.
View detail