Reviews
For Scooter commuters to enjoy
The lower part of the muffler is lost from the Normal muffler, but I felt a stretch in the middle to the middle that is not present in the Normal muffler.
By replacing the Weight Roller, we were able to ride comfortably in city use.
The maximum speed is also quite good (laughs).
View detail
Appeal to appearance and surroundings (As a safety measure)
The sound will be a nice Appeal (laughs).
I used MORIWAKI muffler on my previous LEAD125 and I like the sound, look and feel.
If you expect it to run well, you can replace the Weight Roller at the same time for a good driving experience!
View detail
Mounted on CROSSCUB110 JA60
My favorite is the color Black and the heavy bass sound.
Power is also up!
View detail
More discounts ?-?-?? after you buy!
It was just the right length for NORMALSA.
The sound was larger than I had imagined.
The installation was quite severe, but I managed to get it on, so I expect it to be durable.
Sale was further changed later and it was Shock. I would like to have it returned to Gold.
View detail
Performance up, but
It is a Level that can be installed without going to a Motorcycle shop, although it requires careful handling and installation of the O2 Sensor and the lower part of the vehicle body.
Acceleration is a little better after installation. The maximum output is increased, but it is not as smooth as the OEM.
It would be nice to be able to lower the Rear weight for FrontHopper.
As a precaution, the exhaust noise is 3 to 4 times louder than OEM by feel. Be careful not to disturb others.
View detail
Fits: HONDA PCX160, HONDA PCX HYBRID, HONDA PCX
That's pretty good.
Today, I replaced it and rode it for 3 hours. I guess it was just my mood, but the acceleration was better.
The sound is unobtrusive and unquestionable.
View detail
It's a little different from the old collective pipes.
We, who only know the old collective tubes, were surprised because they contain a catalyst. Old bean-jam-filled wafers (Monaka) I replaced it from a tube so I had a hard time setting it up, I don't think someone changing from OEM would have a hard time. the Design is great. I bought it because I wanted this design. But the sound was better than the old one. But I love the way it looks. View detail
Fits: HONDA PCX HYBRID, HONDA PCX160, HONDA PCX
O2 Sensor.
I installed the 8BJ-JK05 for the 2023 model as soon as I got home after delivery. I was worried about whether the exhaust system for the 21-22 model year could be installed, but it was possible to install without difficulty. By the way, the removal of O2 Sensor is said to be very difficult, but I could easily remove it while working with the light. It is so loud that I suspect exhaust leakage. I don't know about the power up because I am still breaking in the car and can't run it hard. I bought this motorcycle for commuting, so I was going to use Normal, but I guess it is impossible. I had already bought the Exhaust System before delivery. However, it is a good Exhaust System that does not make me regret at all. View detail
CT110 HUNTER CUB, Exhaust System replacement
The accuracy is perfect and can be installed JUST as it should be in Japan?.
I thought the sound would be quieter, but it is much louder than I imagined, and when the rpm is increased, there is a vibration in the seat.
Personally, I don't dislike the sound, it is not loud, but good sound!
It is better when I pull it out, and the rotation rises Smoothly, but I don't feel the power up.
However, we are generally satisfied with both Design and sound.
View detail
![Full Exhaust System MONSTER[MONSTER S2]](https://img.webike-cdn.net/catalogue/images/117222/02011724_63da21db41178_TS.jpg)
The pleasant exhaust sound increased the enjoyment of riding.
After the replacement, I drove the car for a while, and although there was no dramatic change, the low-speed Torque seems to have become thicker and the blow-off has improved. Also, I thought that the fuel consumption would get worse, but it did not change, in fact, I think it got better. After the break-in period, I changed the Exhaust System, so the fuel consumption seems to have improved due to the timing, but it has not gotten worse, so I would like to keep an eye on it.
Incidentally, the fuel consumption was 55.8km/L immediately before the exchange and 61.1km/L after the LExhaust System exchange.
View detail
Black is the best!
First of all, the sound is great, I think it's too loud, I'm an old man so I'm a little embarrassed. I regretted it when I installed YOSHIMURA on my C125, but once I got used to it, it was nothing. (Lol) 8BJ-JK05 I was planning to buy a dedicated Exhaust SystemYOSHIMURA or MORIWAKI the one that came out earlier, so I bought this Exhaust System. View detail
![[Featured]Full Exhaust System MONSTER [MONSTER S2]](https://img.webike-cdn.net/catalogue/images/117222/02021156_63db264f313d7_TS.jpg)
The product is made by MORIWAKI. The texture is solid.
Also known as MORIWAKIBean-jam-filled wafers (Monaka) Kan.
I replaced it with a DIY replacement because the sound quality of the CUB itself was atrocious, even though it was not an OEMExhaust System CUB.
The packaging and precision of the product are excellent, and the installation is easy.
I have only driven about 50 km, so we will see how it changes in the future, but my first impression is that it is clearly thinner than OEM in the very low speed range.
For example, there was plenty of room at OEM for a hand-cut start in second gear, but Kochira is a little sluggish.
On the other hand, the embellishments are reduced. On the other hand, the embrace is reduced and downshift is easier, making it easier to ride when you want to run quicker.
I also got the impression that the engine blows up better than the OEM from the mid-range up.
The volume is loud when idling, and becomes louder at 4,000 rpm or more, so I have to be careful about my surroundings. However, after driving about 50 km immediately after putting it on, it seems to have calmed down a little, so I would like to observe how it changes in the future.
As for the sound quality, it is basically a dry, flapping sound like a single, but when it is cranked up, it reminds one of the old MischiefSpec. ^ ^
View detail
Fits: HONDA PCX160, HONDA PCX HYBRID, HONDA PCX
Installed without difficulty. Sound Large.
Normal There is some difficulty in disconnecting the O2Sensor connector when removing the muffler. The rest is not so difficult. The sound is definitely Large. View detail
Fits: HONDA PCX160, HONDA PCX HYBRID, HONDA PCX
The best
Good bass.
Power has also been increased.
View detail
ROUGH GEAR Full Exhaust System from CT125YOSHIMURA
Finally on sale! We have been waiting for ROUGH GEAR Exhaust System.
It may be an individual difference in installation, but the position of the Exhaust System Screw hole on the side cover was not aligned and it was difficult to insert the screw.
The sound is not as thick and bass-heavy as YOSHIMURA, but it is bass enough.
The starting Torque was YOSHIMURA, and the one that felt good to pull was ROUGH GEAR Full Exhaust System.
We will go with YOSHIMURA and MORIWAKI's Nikatana style.
For the time being, ROUGH GEAR Full Exhaust System.
SilencerCover will be painted Black.
View detail
![Full Exhaust System SHORT MONSTER [ShortMONSTER S2]](https://img.webike-cdn.net/catalogue/images/111937/08161159_62fb0820e8311_TS.jpg)
Fits: HONDA SUPER CUB110, HONDA CROSS CUB110
My favorite sound quality.
The engine displacement volume is small, but the engine turns 5000 rpm at 60k, so the volume is quite large. The quality is very good for the price. The sound quality is to my liking with a beautiful bass sound. View detail
As expected of MORIWAKI.
[How is it used?
The size of the Normal muffler was Large, and it looked heavy, so I got it as a start of customization.
[Was it as per Image?
I chose AnodizedTitanium (rainbow color) Exhaust System, and I felt that it is Gentle among many Customized Exhaust Systems, because of its high quality and its rainbow color. I felt that it was Gentle among the many Customized Exhaust System.
Was the installation difficult?
In my case, I installed it by myself. with the Side Stand out, I locked the front tire to prevent it from moving forward and put the Block under the rear wheel to secure space on the underside of the Right rear. After removing the normal muffler, I temporarily installed the MORIWAKI muffler with a new Gasket, and installed the screws on the engine side by hand, and finally tightened each part. (This procedure is self-initiated, so please do not rely on the information and do so at your own risk.)
If you are not confident in maintenance and installation, or if you want to install without failure, go to Motorcycle shop honestly.
How was your experience with it?
At the time of installation, there is a considerable difference in weight between the Normal muffler and this MORIWAKI muffler when held in the hand.
The overall length is shorter than the normal muffler and there is no exhaust cover, so the exhaust system seems to be about two times smaller. The sound quality after starting up is a little more bass-toned, and the crisp sound characteristic of single-cylinder engines is also stronger, but it is not as loud as expected. However, the volume seems to be louder than expected, and while cruising on Bypass, the volume does not bother me, but when starting from a stop and accelerating hard, the volume seems louder.
[Was there anything that disappointed you?
The low-speed Torque still feels thin when starting off or driving at low speeds. However, it is not so much an inconvenience, but more of a satisfaction due to the change in appearance and sound quality.
View detail
Well suited for air-cooling.
The replacement process is not difficult if you have the knowledge and tools. I did it myself.
Style is excellent. The sound is not as Large as I expected, but you may need to be a little careful with your neighbors.
I don't feel that the performance has changed, but I like that it is lighter than NORMAL by a Large amount.
View detail
MORIWAKIEngineerRing Full Exhaust System One Piece
[How is it used?
Touring
Was the one you received as per Image?
Looks too cool as I thought it would.
Was the installation difficult?
The part where the exhaust pipe is assembled to the silencer was difficult.
How was your experience with it?
Looks great, sounds a little better than NORMAL.
[Included Parts:were they on?
It was all there.
[Was there anything that disappointed you?
I've given up on the idea of Japanese Vehicle Inspection Correspondence, but I need a little more volume.
View detail
CB750rc42 For those who want to enjoy sound
Purchased Exhaust System for the first time
I bought MORIWAKIShort Tube because there are only a few Manufacturers that support it.
The product was packaged very well and carefully!
I'm planning to use it as is for a while and replace Silencer.
View detail