Reviews
Compact
Compact and useful for use in tight spaces.
It is small and cannot apply much force, but it is easy to use when tightening a little and replacing the tip.
I like that the price is not that high.
View detail
Small and comfortable to hold
The Size is easy to grip.
It is also easy to apply force there.
View detail
Rather than turning Screw.
Purchased because I wanted a Minus in Small size.
Minus of such a size is often used for doing things by sticking it into a gap rather than as a driver when servicing.
View detail
Inexpensive, but normally usable.
It's cheap Level sold at a hundred and one. I bought it imagining that it would be a "good" product, but I was betrayed, but in a good way!
I use it not only for Motorcycle but also for maintenance of Glasses and Watches!
View detail
"Normal The sense of security of
It's a very ordinary Driver.
However, unlike very cheap products, there is a sense of security that can be taken for granted without any modification.
Shank and Grip are solid, Plating is clean, and durable. I've been using it quite roughly, but there are no cracks or chips in the grip or the tool tip. The tip is worn out.
If you are not a fan of the thicker grip end for fast turning, this one may be easier to turn.
It's not like a hundred-yen tool or a BALI, but the tool tip has a little edge, so if you use it roughly, it might scratch the object.
View detail
In OHLINSFork's Setting
[How is it used?
I bought this for the OEM Front fork damping adjustment from RSV4 FACTORY.
How was your experience with it?
I used to use the Wrench from Hexagonal Wrench Set, but it was difficult to use.
At that time, I saw other people's impressions and thought it looked easy to use, so I bought it.
Since it is a Driver type, it can be turned lightly.
[Points to note]
Since it is a ball type, you can approach from many angles, but if you apply too much torque, the ball will come off.
Also, I wanted this size for suspension setting, but I bought other size by mistake before, so please look at the size carefully when you buy!
View detail
You can find the power source safely.
This Inspection Tester is indispensable for the installation of electrical components. It is useful to find the permanent power supply or attachment power supply from the harness of the vehicle. If there is a power supply, the LED on the body will light up, so you can find it easily. View detail
Effective in tight spaces
Effective for use under the body of a motorcycle or in tight spaces where there is no clearance. It is easy to turn with just your fingertips, and if you have a firm grip, you can turn it with a strong torque. View detail
Convenient for battery replacement
Easy to use Size Quantity:The Set is useful for changing the batteries in the Key less key, the thinnest Minus can be used to unlock Wiring from the Coupler, and the tip is strong and unbreakable, so it's easy to use. View detail
Easy to use
The Grip is easy to hold and very forceful and can be tightened and loosened with the Large Torque. The handle is just the right length and is a must-have for motorcycle maintenance. View detail
For OHLINSSetting
I bought this for Front fork DamperSetting in OHLINS.
It's a bar handle type so the tool didn't go in properly.
ANEX A Neck's Ball pointHexagonal WrenchDriver [vs. side 3×120] If you use a ball point, you can set it up with no problem, even if you put it at a slight angle.
A longer Type would have been better.
View detail
It's easy to put effort into.
The grip is just the right thickness to deliver the torque firmly, and since it is pierced type, it is convenient for old, hard screws and screws that are hard to loosen by licking. View detail
This is just the back of the line!
Sometimes when I'm trying to install and remove parts, I can't get the tool in the gap like this! How does it work? I am faced with this situation. Just the other day, I used the Front Tappet Cover of Grom's Engine on SPTakegawa Remove the OEM HexagonalBolt when replacing it with Shiningly's Parts, too. However, when tightening the Cap bolt at the time of installation, the Hexagonal I had a hard time getting Wrench in.
And while I was thinking about further dress-up plans, I was thinking about the Material:Plastic Tank Cover:I've started thinking about replacing it with a certain part of Carbon. In the past, I didn't think much about how to install it, I just ordered it and fumbled with it when it arrived. This time, while looking at the parts catalog, I was able to see where and what kind of bolts were used. Checked. Then, I was surprised. 1 pc Screw in front of Tank Cover is Triple There is a small gap (maybe 40mm from the Stem Nut) between the clamp and It turns out that it's there, and in a position where a normal tool will never fit. I can't take it off or put it on with this, I have to make the Front part RoseRose. I can't access it.
I do not think that I will change the cover even to do so. However, I began to look for tools to see if this Screw can be removed somehow. I searched using various Key words, and I am sure that "Very short. I came across this Tool when I used a Keyword called The height, including the Handlebar, is a whopping 21mm! This could fit in the cracks!
The product I received was so-so in terms of build quality, a little more slender than the KTC and SIGNET. The Handlebar is also very short, about 10cm in length. However, if you put it in the Pocket when touring, it is very Compact. Peace of mind. Various Quantity:There is a set, but I'd like to use the full set with 9 pieces including HexaGon bit. I chose it. It's still Compact enough, and the Bit is supposed to be fixed with Magnet, so it's easy to use It won't drop out and fall out, because in the normal system of stopping with Spring, it would be long. The shortest bit is realized by solving that problem with Magnet. Awesome.
So, still Material:I haven't received the Tank Cover of Carbon yet (waiting for delivery), but I'm waiting for the delivery now. I tried to access the Screw at the same place. The result is as shown in the picture. We were able to get into a gap of only 40mm and turn the screw! I was able to achieve the purpose of this time, but I think the same thing will happen in the future. The possibility of being able to access the place that you gave up because of the inaccessibility of tools increases to Large width. . It's a real Tool in the back!
This product, I chose the one with a straight handle, but it was 15 degrees up or down in the middle. There is also a downward bent handlebar type. I think there are some cases where these curved types are easier to use depending on the position. You can buy Handlebar only, so you can use it for any situation when you have it all. You can do it. As for the Screw, which cannot be put in even with this tool, I really think you have to give up. It is. But I'm not ready to give up without it! This is handy!
View detail
Grip thickness and texture
I bought it for use in cases where there are no spaces that can be delicately delicately delivered in Hex wrench of L-type.
It has a straight shape and still has a long overall length, so it is very easy to use in narrow and recessed places, and in my case I mainly use it for fixing the carburetor and Insulator fixing band.
Since Size is only 3 mm in the meantime, basically it is against Bolt not to be used with such a high Torque basically, but only for the moment of loosening from the state of final tightening, I want a little more of the thickness of the Grip part and anti-slip processing Become.
In the case of actual work, as long as you do not care much, the palm is very slippery with sweat and oil stains, so only the texture of this Grip and cranky texture was MinusPoint.
Since the tip is a Ball point, the point which can be turned even if it is slightly angled is very good, and if it is used straight it will be able to endure the final tightening.
Maintenance of Motorcycle is a fight against working Space, so the tool "I get access to itching place" I need something. I think that this product is not a basic tool, but once you find a part that can be used once, you will not be able to let go of it anymore.
View detail
Purchase for Tie Wrap
Purchased because the sharpness of Nipper on hand is getting worse.
The commodity itself was Size to fit in the palm and the cutting edge was thin, so I was concerned about the sharpness, but when you actually cut it you can cut off the pass.
As Main is for Tie Wrap, the blade will never be damaged soon..
Since the cutting edge is thin and thin, Cut of Tie Wrap in the back is easy as well.
View detail
Although it was going to adjust the Cam chain tensioner of Ape50, since the usual Driver was not able to be used from the convenience of the position of a tensioner Bolt, it decided to look for a suitable tool.Although he tried to buy a Flexible-attachmen
Although it was going to adjust the Cam chain tensioner of Ape50, since the usual Driver was not able to be used from the convenience of the position of a tensioner Bolt, it decided to look for a suitable tool.Although he tried to buy a Flexible-attachment type Driver at the
beginning, this product is discovered when it is wavering from the reason that he also has to buy a Handle part and a value stretches!
Since it was quite reasonable, it purchased immediately.Smile
Attachment of a Bit is a Magnet type and can also be changed [ of a direction of rotation ].I think above all that he has besides [ convenient / thing / no ] in using it for a crevice, inserting since height is very compact!
Well [ although it is a single functional Items for Cam-chain adjustment of Ape50 now, are useful unexpectedly in some cases and ].
Although there is no high grade feeling about structure, it is touch that it is enough required.I think that a movable part is also smooth and is just daily necessities of simple and sturdy and a quantity Cost performance!
View detail
When desorbing a Cowling, since it was irritating work when there were many hexagon head bolts, although L type hezagonal wrench was used, an annex hezagonal wrench Driver is purchased. It comes to be able to do work quickly in a user friendly manne
When desorbing a Cowling, since it was irritating work when there were many hexagon head bolts, although L type hezagonal wrench was used, an annex hezagonal wrench Driver is purchased.
It comes to be able to do work quickly in a user friendly manner in the form where it is easy to adapt itself to a hand, and is stress alleviation.
View detail
Although it is hard to have and hard to impose a Torque in case of a Wrench single article, since it is also hard to lose a Driver type by Being easy to treat, it is saved. [ ] since it was used when removing the Cover, but its Nut is not
Although it is hard to have and hard to impose a Torque in case of a Wrench single article, since it is also hard to lose a Driver type by
Being easy to treat, it is saved. [
]
since it was used when removing the
Cover, but its Nut is not
hurt but it is also easy to work -- this tool --
-- true -- we can recommend you.
View detail
Although it had the hezagonal wrench, for work on a desk, it treated for L shape, and it was hot. since -- although it is also the purchase [ease of grasping] and a Super fit, and a name, it was not necessarily so easy to grasp Driver type
Although it had the hezagonal wrench, for work on a desk, it treated for L shape, and it was hot.
since -- although it is also the purchase
[ease of grasping]
and a Super fit, and a name, it was not necessarily so easy to grasp Driver type 2.0 and 3.0.
Although the die length of
and the Driver portion to which, as for the raw material, the Rubber of the skid is attached by the product made of resin is different for every Size,
Since it had and same the
[ease of turning]
and head section all rotated the die length of the hand portion, when pushing by hand and turning, there was a Driver with which a head section does not turn around whether they are the convenience
and an inspection mistake.
since -- it can turn even from across and convenient, since
and the tip which pulls, removes and cuts off a convex portion and around which it made it turn are ball state.
it comes to suppose that strong power is put in case of
and the thin Size which will become hot using the usual hezagonal wrench if it gets used to this, and breaks and meets -- coming out -- fearful
[general comment]
- work progressed too that it is easy to turn a Driver type.
Since two more kinds of Sizes also remain, I would like to arrange.
View detail
The Minus and the Set are mainly using as an object for electric construction of a home/Garage. Although it is an ordinary 電工 Driver, since it can work also in various postures if the hips of a Grip are held as a feature of a 電工 Grip, it is con
The Minus and the Set are mainly using as an object for electric construction of a home/Garage.
Although it is an ordinary 電工 Driver, since it can work also in various postures if the hips of a Grip are held as a feature of a 電工 Grip, it is convenient.
Even if there being Shank length of 100 mm short as PH2 and a Shank set an insulating coat thinly, since it is comparable as the usual Driver, it can just be going to use the good place of these 7800 Serieses conveniently [ even place / narrow ].
The isolation voltage 1000V which can also use the
professional is cleared, and it is also the point that it is the structure where a Short can be prevented as much as possible with covering an insulating coat just before Riseth of the Screw head.
View detail