Reviews
Might as well take the first step...
When I was looking for a model with Inner Visor, SHOEI was expensive and KABUTO's Graphic was not to my liking (Pin lock is not standard either!!!). So, when I was wondering about it, I came across it.
I was worried about the fitting for FOR JAPAN MODEL, so I checked it at the store where the actual product was placed, and the fit of my head, which is usually M for SHOEI and M for KABUTO, was just in the middle of the Image for LS2 (15 minutes wearing).
After actual use (about 6 hours of rest every hour and a half or so), I was able to use it without any concerns.
I would have been happy to give it 5 Stars,
Paint may be weak...Paint was chipped off by tipping (I don't remember any domestic model having paint chipped off by tipping).
As other people have said in their impressions, the air flow from the upper Intake to the domestic MODEL is very small, and the air flow from the upper Intake to the domestic MODEL is very small.
It is difficult to feel (? not to say it is not effective, but it is difficult to feel)
Therefore, we gave it 4 stars.
However, considering the design and price, I think it is highly satisfactory.
View detail
Helmet that I finally came across
Until now, I have been fitting a FOR JAPAN MODELManufacturer Helmet in Size XL with adjusted Sponge.
The thunder c gp is Fit with no need for that adjustment Sponge.
I was able to try on the L size at Events and was surprised to find that the fit was the same as the unadjusted and adjusted Helmet.
And now we have purchased it from webike.
The product description stated that it was made to fit the Japanese skeleton, but I was told by a manufacturer that my head was a M size in width and XL in front and back, which is close to the shape of a Westerner's head, so for me, the product description was a lie in a good way (laugh).
But this frees you from the tedious Sponge adjustment.
It was about 400 Grams lighter than the Helmet I was using at Main, and everything was easier from the neck down.
It is surprisingly light.
I can't go back to other helmets.
Included Parts:Including Helmet Bag, Smoke Shield, Tear off, Helmet Pillow, etc. are abundant and very reasonable.
However, unlike JAPAN, Smoke Shield seems to be for Westerners with blue eyes who can see well in the dark, so I, as a Japanese, do not use it because I cannot see well, and buy Light smoke.
Seiden, I would appreciate it if you could include light smoke if it is available as a choice at the point of importation.
Upward visibility is very good when getting down at full power in Circuit.
However, there seems to be a GlassesSlit, but I have some difficulty plugging it in.
I chose Carbon for the color, but I am using Material:I don't care about Carbon Style, so I would be happy to have a Graphic one.
View detail
It is outstandingly light!
Was the one you received as per Image?
It is cooler than it looks in Catalogue.
[How did you feel about the Fit?
It seems to be a Japan-only spec, but the inner pad is harder than the Japan product.
It is hard and rough and has a low Fit feeling.
How was your experience with it?
The lightness is outstanding, I always had neck pain with SS, but my head was light and easy.
The aerodynamic characteristics are also better than OGKShoeema.
Wind Cutting sound and quiet characteristics are normal.
What are the specifications of the product?
Ventilation is normal within legal speed limits.
Included Parts:is a good value for the money.
It even has a Dark smokeSeal, Pin lock and ShieldFilm.
[Was there anything that disappointed you?
When the Shield lock is opened by Button type, there is no flange on the Shield.
It is difficult to open.
The cap is not compatible with wireless microphone.
Fit feeling is quite low. 。
How did it compare to other products?
Material at this price:Carbon products are not found in domestic products.
It is lightweight and has good aerodynamic characteristics.
The interior quality and fit feel is low.
Other items that would be helpful
Deciding Factors for Purchase/Included Parts:Presence or non-existence of Included Parts/Points to Note/Opinions and Requests to the Manufacturer
Rear spoiler is available as an Option.
View detail
Inner Visor. [Color] Can be changed to Clear.
I would like to share with you my impressions on the day I received the Helmet,
Size is currently using two SHOEI Z-7s and an XR-1100. The Z-7 is still in good condition with no interior wear and tear, while the XR-1100 is 12 years old and the interior is thinning like seasoned seaweed.
The size of this product is M and Z-7 is also M Size, but Z-7 is more Tight (cheeks).
The lightness felt like there was no difference in the experience. It is a little strange.
I chose this product because of its price, design and [Color] The Inner Visor of Clear can be used. (Mirror shield and [Color] (ClearInner Visor was also ordered at the same time.) I've been wondering what helmet to get next for about 3 years, and this has been an option for quite some time, but recently [Color] I felt like I knew I could use Clear's Inner Visor and decided to go with it.
The only thing that bothered me was that there was a stain on the synthetic leather on the underside of the Cheek pad. The Cheek pad is not visible once it is covered, so there is no problem, The Visor is also OK because I don't use it often and I don't feel like I can tell when I test drive it. I am satisfied with Large because I got a good product at a low price. I can finally retire my XR-1100.
View detail
Fit feeling is good for a foreign-made Helmet.
Many foreign-made helmets, even AsianFit, are narrow for Westerners, and when worn, there is often a feeling of pressure from the SIDE and an impact on the ear area when putting on and taking off.
I feel a little pressure around Teak, but I don't mind it because I expect it will wear out after use.
However, the cap appears to be slightly larger in size, so from a third-party viewpoint, the silhouette is a bit too big for the head.
The paint job and interior texture are good, and the design resembles Armour's Helmet, which appears in the famous game "H◯LO.
The PeakVisor is even more similar, but this Visor is difficult to use. It may be a matter of getting used to it, but when I tried to close the open Shield, I accidentally picked up the Visor and couldn't close it. "What? It won't close!" This can be the case.
Shield also seems to be slightly distorted in the forward direction.
In addition, the Knob for opening and closing the Shield is located directly in front of the Shield and is small, making it difficult to pick up and operate depending on the Gloves.
Weight-wise, it is hard to judge since it is the first full-face, but looking at the Specifications, I think it is slightly heavier.
Considering the price and other factors, I think this is a well-made product overall.
View detail
Cost performance is the best
I own helmets from various manufacturers, but the LS2 is my top choice.
The size feeling is the same as FOR JAPAN MODELManufacturer. It feels lighter than the published value and there is no burden on the neck.
Inner Shield is also easy to operate and ready to use when the need arises.
Above all, CarbonHelmet is really excellent in cost performance at this price.
The distributor, Seiden, also puts a lot of effort into after-sales follow-up, so there is no need to worry about being an overseas manufacturer.
View detail
I will never buy LS2 again.
Was the one you received as per Image?
I bought it because I fell in love with it at first sight when I saw the picture on the product description Page.
But the product I received was Black, unlike the picture.
I would not have bought it if it was this color.
Manufacturer claims that there is no problem because of the light and individual differences.
Perhaps it would be Silver like the description Page if it were shot using a photographic Light stronger than the direct sunlight of mid-summer noon.
However, this is a motorcycle helmet. Naturally, it is supposed to be used outdoors.
And this looks like Black even in direct sunlight at noon in midsummer, no matter how anyone perceives it. Helmet in Black. Id.
I doubt the good sense of the manufacturer to sell a product with a picture that looks like silver, using excuses such as individual differences and the sensitivity of the light.
For the guests (at least for me). I've been duped." I can only feel that this is the case.
[How did you feel about the Fit?
It is not AsianFit, so the top and back of my head is too much on the side of my head for my typical Asian head.
Moreover, the cushion on the side of the head is thin, and there is a groove carved into the liner in that area, and the protrusion of the groove hurts when it hits.
The narrow frontage makes it hard to put on and take off, and the cheek pad is tight.
On the other hand, if it is covered, Quantity:Pair (for Left and Right) The Fit feeling of the "Fit" is not bad, and the advantage is that the Income speaker is also close to the Plus for quietness and improved sound quality.
How was your experience with it?
Upper Ventilation is useless.
As shown in the attached photo, the head interior is fully covered.
Therefore, the head is completely separated from the wind path from Ventilation by the interior.
This would not allow the head under the interior to feel the wind, even if the wind did pass through.
In addition, if you are a person who fits your head, the Cushion on the top of your head could completely block the passage of the wind.
For now, we'll just drill holes in the cap and the liner." I have to wonder if this is the idea.
Ventilation at the mouth, on the other hand, has a large opening for better airflow.
In addition, while helmets with Inner Visor generally do not have an air inlet from the forehead due to their structure, this product has a structure that allows air to flow from the forehead to the inside of the Inner Visor, which is a notable advantage (although the effect was not felt).
What are the specifications of the product?
The Microphone storage space for Income at the mouth is kindly designed.
[Was there anything that disappointed you?
Interior sewing was shoddy, with some gaping from the center and some forgotten stitches. The interior sewing was shoddy, with some gaping from the center and some forgotten stitches.
The Speaker of Income is covered by a Chin strap.
Income mounting is not well considered, as evidenced by the Inner Visor Slide in a position suitable for Income mounting, and there is no suitable flat surface for taping (inevitable floating edges).
How did it compare to other products?
Motorcycles and wears are popular among overseas manufacturers, but when it comes to helmets, they are treated as third-rate products and not even looked at by many people, which is strange until now.
If this is the case ... Helmet of Foreign Manufacturer is no good." It is only natural that this would be the case. I learned a lot.
View detail
Lightness is justice?
I like helmets made by foreign manufacturers and have many of them, but this is one of the best and lightest among them.
Included Parts:is also included in the price.
TeakBat is a little bit tight, but for me, the size feeling is the same as that of domestic Manufacture.
In addition to being lightweight, the Ventilation system makes it less suffocating than other full face helmets, even in summer.
Manufacturer is also putting a lot of effort into SNS, so even those who are worried about overseas manufacturers can rest assured that they are in good hands.
View detail
First Carbon
I thought it would take a long time to arrive because of Helmet overseas. I received the helmet in 4 days, so I gave it 4 stars. I am very happy with the quality and the price.
When it comes to design, I would give more than 5 stars.
I'll give it a modest 4 stars after using it for an extended period of time.
(Addendum) As for the design, I think it is a product that I can really recommend to others Parenthesis well.
View detail
Psycho and Parenthesis are great!
Was the one you received as per Image?
It is cooler than Image.
[How did you feel about the Fit?
I feel that the size is the same as FOR JAPAN MODELTopBrand.
How was your experience with it?
It feels light for a product with Inner Visor.
What are the specifications of the product?
Ventilation is also excellent. Wind Cutting noise is also low.
[Was there anything that disappointed you?
The texture of Ventilation's Switch is low and disappointing.
How did it compare to other products?
Anyway, the design is good.
The Bag and HelmetCushion in Included Parts:are of some use!
View detail
PENALTY!
First of all, the size is almost the same as my ARAI and CUBTO L. However, it feels a little tight on the cheeks.
The weight is not extremely light or heavy. It is normal.
The wind cutting sound is a little too much, and even with the duct tightened, there is a lot of wind inflow near the mouth, which may be cold in the wintertime. I don't feel much wind resistance, but I sometimes hear a creak sound around the right ear.
I think street youth will be satisfied with it.
View detail
LS2 THUNDER C GP
I was looking for a MFJ approved helmet for use in Raceetc.
Smoke Shield, Pin lock, Helmet case etc. included.:I thought this was a good deal, so I bought it.
In fact, when I used it at Circuit, it's just so light! And the visibility is great!
The Shield is a little difficult to open when wearing RACING Gloves, but once you get used to it, I think it will be Large and sturdy.
I also feel that the RACINGNOSE deflector could be fixed more securely.
View detail
RecommendationManufacturer for those who are worried about overseas manufacturers
I liked THUNDER C GP so much I bought it for my neighbor.
The size feeling is the same or slightly smaller than a Japanese M. If you get used to it, you will have no problem with the Level.
Seasonally, the period of use is outside of winter.
LS2 is very responsive to the distributor, and they also put a lot of effort into social networking, so you can consult with them with confidence. If you are worried about overseas manufacturer, we recommend LS2.
The size of LS2 Helmet is different depending on the model and each person's head shape is unique, so I think it is best to try it on in a real store and buy it on Webike.
View detail
Third Helmet
Purchased XXL, used RX-7X XO (63-64) and Z-8XXL until now.
I was attracted to Carbon and bought it. The overall size is good and Carbon is beautiful.
It is easy to put on, but there is some pressure only on the beehive of the head.
The Z-8 has more room around the mouth and nose than the Z-8, and it is very easy to open, close, and replace the Shield.
In addition, I am satisfied with the Included Parts:and I am satisfied with the Large change.
View detail
Photo
Colors and design are very good. View detail
Large is the same as domestic products, slightly cheaper.
Helmet is from an overseas manufacturer, but the size feel was almost the same as ARAI, Shoei, and OGK.
I am a little tight with the ARAI L, and the OGK.Shoei L is just right, but this Helmet is just as good with the L.
If you are not sure about the size, you can use the same size as the domestic Helmet.
The fit is like a large cap, supported by the interior.
It feels like it is supported especially under the cheeks, and there is no tightness at the temples, making it a comfortable Fit.
It is cool, but I think the interior is cheap and the Shield is distorted.
The vision around the nose area looks a little distorted, which may be a concern for Motorcycles that are ridden upright like American and NAKED.
Motorcyclists who ride with a forward leaning posture are likely to look up, so this does not seem to bother them.
View detail
Anyway, it is a lightweight helmet.
Anyway, it is very light. I was surprised when I held the actual product.
There is no SpeakerHolder, but it lands where the ear goes in. b+comBody also sticks without a problem, so no worries.
View detail
More than expected…
I bought this for my son who got a motorized bicycle license. I chose this product because it is inexpensive, cool, and safe, and because it is for full face use only, although he also got a permit at his high school. I am not sure if he will be able to get used to it or not.
Large satisfaction with function and design.
They say it is Just fit if you don't wear glasses.
View detail
Small type, lightweight, with Pin Lock Shield.
This product is Small Type, lightweight, with Pin Lock Shield, designed by a Spanish company, Parenthesis. View detail
No complaints as long as the Size is right.
I use several different Helmets, but the main ones are ARAI and Yamaha.
My Yamaha full face was getting old and I was thinking of getting a new one, but then I saw the LS2 SaleS, so I bought it without a second thought.
LS2 is a Spanish company, although it is not well known in Japan. The size of foreign-made helmets is a concern for me. According to MAJOR's measurements, a L size should be comfortable, but when I put on the helmet that arrived at my door, I found that it was not. Tight." It is too tight, but not too tight that you can't get a rash. However, it hurts after wearing it for more than an hour. I had no choice but to modify the interior, and finally it became usable. By the way, I always use L size in ARAI, and it seems to be safe to choose XL for those who are equivalent to L size in ARAI.
The cap is slightly larger in front and back than Yamaha's, but smaller at the top and bottom, possibly due to the Inner Shield. This is Tight, but it is thought to be related to the shallow wearing comfort.
Rival will be Yamaha or HJC, but in terms of equipment and quality, there is nothing to be inferior to them.
Graphic is available at this price, has Inner Shield, removable and washable interior, and well-made interior.
However, the Inner Shield is raised and lowered on the SIDE surface, which is a bit difficult to do while driving. The parietal type of HJC that I own can be raised with One-touch, which is useful when entering Tunnel.
The chinstrap is one-touch, but well thought out, with a D ring for a helmet holder.
MainShield replacement is also easy.
The Japan distributor is well established and has a complete Instruction Manual with translation (enter here). However, the instruction manual does not mention how to remove the interior. Nevertheless, if you enter the Site from the QR code on the attached Tag, you can see a video How to remove it. It is possible to see such things as
View detail