Reviews
It's cool.
This is good.
I was fascinated by the very eye-catching Design when I saw it during the Net introduction.
So I went to the store and the real thing is even better. The texture is good, and you don't feel like you are buying a cheap product. the Graphic model was cool, but the Black Helmet I have on hand satisfies my desire to own one.
The interior fits reasonably well and feels secure. In my case, I usually wear a medium size, but the large size fits me perfectly.
My concern is that the wind noise may be a little Large, which may be due to the Visor. I recently purchased a Full faceKit, so I will try that to see how much of an impact it has.
Also, Income is not easy to install. I didn't want to do it too much, but I decided to attach Income with the included Seal.
Considering the price, I am generally satisfied with the product, and I would recommend it to anyone who likes the Design!
View detail
Might as well take the first step...
When I was looking for a model with Inner Visor, SHOEI was expensive and KABUTO's Graphic was not to my liking (Pin lock is not standard either!!!). So, when I was wondering about it, I came across it.
I was worried about the fitting for FOR JAPAN MODEL, so I checked it at the store where the actual product was placed, and the fit of my head, which is usually M for SHOEI and M for KABUTO, was just in the middle of the Image for LS2 (15 minutes wearing).
After actual use (about 6 hours of rest every hour and a half or so), I was able to use it without any concerns.
I would have been happy to give it 5 Stars,
Paint may be weak...Paint was chipped off by tipping (I don't remember any domestic model having paint chipped off by tipping).
As other people have said in their impressions, the air flow from the upper Intake to the domestic MODEL is very small, and the air flow from the upper Intake to the domestic MODEL is very small.
It is difficult to feel (? not to say it is not effective, but it is difficult to feel)
Therefore, we gave it 4 stars.
However, considering the design and price, I think it is highly satisfactory.
View detail
First full face helmet
I was anxious about wearing a full face helmet for the first time, but when I put it on for the first time, the visibility was as wide as a jet helmet, and I can't say enough about how impressed I was with the touring. View detail
I feel like an EWCRider.
I have purchased a thunder c gp, which I have longed for, so I added it to my collection.
I found a careful explanation on the LS2 website, so I worked with that as a reference.
Firmly peel off the Defferential Gearo Spoiler attached to the strong while warming it up with a dryer.
If you heat the double-sided tape strongly, it will be easier to peel off the double-sided tape, but it must not harm the cap, so just warm it quickly and peel it off with the determination to break the Defferential Gear or Spoiler (laugh).
I'm guilty of breaking my new Helmet (laughs).
The description also said that the Defferential Gear form spoiler is not reusable. However, it is not easily broken and can be reused after applying a new double-sided tape.
Once the tape is peeled off, the glue from the tape is removed with a label remover and the adhesive surface is cleaned with silicon remover. This is the most large and strange part of the process.
The tape was temporarily placed on the surface and positioned at key points, and the chili feeling was memorized with the fingertips.
At any rate, I am Large satisfied with Parenthesis goodness.
However, it is a little disappointing that the Rear Emblem is hidden.
I would like to try the effect with HelmetBody at Circuit next time.
View detail
For cloudy days and evenings
I was told that the yellow color of the Glasses for clay pigeon shooting is to see the target in dim light. I purchased and installed the Glasses in anticipation of better visibility when driving in the Circuit under cloudy skies or in the evening.
I have not done any actual running, but it was cloudy today, and when I looked outside during the fitting phase, the view looked brighter and more promising.
View detail
Helmet that I finally came across
Until now, I have been fitting a FOR JAPAN MODELManufacturer Helmet in Size XL with adjusted Sponge.
The thunder c gp is Fit with no need for that adjustment Sponge.
I was able to try on the L size at Events and was surprised to find that the fit was the same as the unadjusted and adjusted Helmet.
And now we have purchased it from webike.
The product description stated that it was made to fit the Japanese skeleton, but I was told by a manufacturer that my head was a M size in width and XL in front and back, which is close to the shape of a Westerner's head, so for me, the product description was a lie in a good way (laugh).
But this frees you from the tedious Sponge adjustment.
It was about 400 Grams lighter than the Helmet I was using at Main, and everything was easier from the neck down.
It is surprisingly light.
I can't go back to other helmets.
Included Parts:Including Helmet Bag, Smoke Shield, Tear off, Helmet Pillow, etc. are abundant and very reasonable.
However, unlike JAPAN, Smoke Shield seems to be for Westerners with blue eyes who can see well in the dark, so I, as a Japanese, do not use it because I cannot see well, and buy Light smoke.
Seiden, I would appreciate it if you could include light smoke if it is available as a choice at the point of importation.
Upward visibility is very good when getting down at full power in Circuit.
However, there seems to be a GlassesSlit, but I have some difficulty plugging it in.
I chose Carbon for the color, but I am using Material:I don't care about Carbon Style, so I would be happy to have a Graphic one.
View detail
It is outstandingly light!
Was the one you received as per Image?
It is cooler than it looks in Catalogue.
[How did you feel about the Fit?
It seems to be a Japan-only spec, but the inner pad is harder than the Japan product.
It is hard and rough and has a low Fit feeling.
How was your experience with it?
The lightness is outstanding, I always had neck pain with SS, but my head was light and easy.
The aerodynamic characteristics are also better than OGKShoeema.
Wind Cutting sound and quiet characteristics are normal.
What are the specifications of the product?
Ventilation is normal within legal speed limits.
Included Parts:is a good value for the money.
It even has a Dark smokeSeal, Pin lock and ShieldFilm.
[Was there anything that disappointed you?
When the Shield lock is opened by Button type, there is no flange on the Shield.
It is difficult to open.
The cap is not compatible with wireless microphone.
Fit feeling is quite low. 。
How did it compare to other products?
Material at this price:Carbon products are not found in domestic products.
It is lightweight and has good aerodynamic characteristics.
The interior quality and fit feel is low.
Other items that would be helpful
Deciding Factors for Purchase/Included Parts:Presence or non-existence of Included Parts/Points to Note/Opinions and Requests to the Manufacturer
Rear spoiler is available as an Option.
View detail
Generally looks good, but a little distressed.
Fitting is perfect. It installs without any problems and looks kind of beautiful.
Blackness is equivalent to Semi-smoke, not Light smoke by ARAIHelmet standards. The face is almost invisible from the outside. It is good during the daytime and visibility is good. [Color] Clear and calm driving.
However, in the tunnel or after sunset, although it is not dangerously invisible like ARAI's Dark Smoke, it is often difficult to see, and one unconsciously raises the Shield.
View detail
Inner Visor. [Color] Can be changed to Clear.
I would like to share with you my impressions on the day I received the Helmet,
Size is currently using two SHOEI Z-7s and an XR-1100. The Z-7 is still in good condition with no interior wear and tear, while the XR-1100 is 12 years old and the interior is thinning like seasoned seaweed.
The size of this product is M and Z-7 is also M Size, but Z-7 is more Tight (cheeks).
The lightness felt like there was no difference in the experience. It is a little strange.
I chose this product because of its price, design and [Color] The Inner Visor of Clear can be used. (Mirror shield and [Color] (ClearInner Visor was also ordered at the same time.) I've been wondering what helmet to get next for about 3 years, and this has been an option for quite some time, but recently [Color] I felt like I knew I could use Clear's Inner Visor and decided to go with it.
The only thing that bothered me was that there was a stain on the synthetic leather on the underside of the Cheek pad. The Cheek pad is not visible once it is covered, so there is no problem, The Visor is also OK because I don't use it often and I don't feel like I can tell when I test drive it. I am satisfied with Large because I got a good product at a low price. I can finally retire my XR-1100.
View detail
Affordable price
Visibility was good, not too dark and not too light. View detail
Clear type not seen in other companies
When touring in a tunnel, when you can't get home before sunset, or when it's hard to see the Shield because of the rain. [Color] I think ClearInner Visor is quite good, and I think Manufacturer should promote this point more. View detail
They even sell parts like this.
The store where I bought the helmet does not even sell such small parts. View detail
Fit feeling is good for a foreign-made Helmet.
Many foreign-made helmets, even AsianFit, are narrow for Westerners, and when worn, there is often a feeling of pressure from the SIDE and an impact on the ear area when putting on and taking off.
I feel a little pressure around Teak, but I don't mind it because I expect it will wear out after use.
However, the cap appears to be slightly larger in size, so from a third-party viewpoint, the silhouette is a bit too big for the head.
The paint job and interior texture are good, and the design resembles Armour's Helmet, which appears in the famous game "H◯LO.
The PeakVisor is even more similar, but this Visor is difficult to use. It may be a matter of getting used to it, but when I tried to close the open Shield, I accidentally picked up the Visor and couldn't close it. "What? It won't close!" This can be the case.
Shield also seems to be slightly distorted in the forward direction.
In addition, the Knob for opening and closing the Shield is located directly in front of the Shield and is small, making it difficult to pick up and operate depending on the Gloves.
Weight-wise, it is hard to judge since it is the first full-face, but looking at the Specifications, I think it is slightly heavier.
Considering the price and other factors, I think this is a well-made product overall.
View detail
Cospa best
Visor is also nice Parenthesis.
I am about 62 in size and chose XXL and it was the right choice.
View detail
Good or bad? Loose like a Jet helmet.
[How is it used?
I bought the LS2 Scope XL, but after wearing it for a long time, my temples hurt, so I bought the XXL to try it out.
Was the one you received as per Image?
The properly thin and comfortable fit is very loose and good.
Full face, system helmet should be tight.
How was your experience with it?
It is easy to use because my temples don't hurt and my cheeks are loose.
[Points to note]
I made it loose, so the shock absorption is nothing to write home about.
I don't know is the answer.
How did it compare to other products?
Other reviews show that it is designed to be tighter than those made by other manufacturers.
I don't think it's for everyone.
View detail
Cost performance is the best
I own helmets from various manufacturers, but the LS2 is my top choice.
The size feeling is the same as FOR JAPAN MODELManufacturer. It feels lighter than the published value and there is no burden on the neck.
Inner Shield is also easy to operate and ready to use when the need arises.
Above all, CarbonHelmet is really excellent in cost performance at this price.
The distributor, Seiden, also puts a lot of effort into after-sales follow-up, so there is no need to worry about being an overseas manufacturer.
View detail
Relatively inexpensive and design-oriented.
Was the one you received as per Image?
Design was as per Image.
The color scheme is not bad.
[How did you feel about the Fit?
I am usually a "L", but since there was information about a Small size, I decided on an "XL".
It was just right.
How was your experience with it?
? In the summer, I didn't feel like using it, but I have been using it since late October.
Maybe a little heavy?
I think the wind noise is Large.
Long Screen is not a problem, but Screen height po
Depending on the dichotomy, at 80 km/h, a hyo~hyo~ sound is heard ….
Standing and in NAKED condition, it's a wind noise that I wouldn't be able to make.
What are the specifications of the product?
?Inner Visor, I don't think it works very well, morning and evening sunlight is quite difficult.
The ?Shield, Inner Visor, and interior are easy to put on and take off.
[Was there anything that disappointed you?
I wonder if it's a wind noise.
View detail
I will never buy LS2 again.
Was the one you received as per Image?
I bought it because I fell in love with it at first sight when I saw the picture on the product description Page.
But the product I received was Black, unlike the picture.
I would not have bought it if it was this color.
Manufacturer claims that there is no problem because of the light and individual differences.
Perhaps it would be Silver like the description Page if it were shot using a photographic Light stronger than the direct sunlight of mid-summer noon.
However, this is a motorcycle helmet. Naturally, it is supposed to be used outdoors.
And this looks like Black even in direct sunlight at noon in midsummer, no matter how anyone perceives it. Helmet in Black. Id.
I doubt the good sense of the manufacturer to sell a product with a picture that looks like silver, using excuses such as individual differences and the sensitivity of the light.
For the guests (at least for me). I've been duped." I can only feel that this is the case.
[How did you feel about the Fit?
It is not AsianFit, so the top and back of my head is too much on the side of my head for my typical Asian head.
Moreover, the cushion on the side of the head is thin, and there is a groove carved into the liner in that area, and the protrusion of the groove hurts when it hits.
The narrow frontage makes it hard to put on and take off, and the cheek pad is tight.
On the other hand, if it is covered, Quantity:Pair (for Left and Right) The Fit feeling of the "Fit" is not bad, and the advantage is that the Income speaker is also close to the Plus for quietness and improved sound quality.
How was your experience with it?
Upper Ventilation is useless.
As shown in the attached photo, the head interior is fully covered.
Therefore, the head is completely separated from the wind path from Ventilation by the interior.
This would not allow the head under the interior to feel the wind, even if the wind did pass through.
In addition, if you are a person who fits your head, the Cushion on the top of your head could completely block the passage of the wind.
For now, we'll just drill holes in the cap and the liner." I have to wonder if this is the idea.
Ventilation at the mouth, on the other hand, has a large opening for better airflow.
In addition, while helmets with Inner Visor generally do not have an air inlet from the forehead due to their structure, this product has a structure that allows air to flow from the forehead to the inside of the Inner Visor, which is a notable advantage (although the effect was not felt).
What are the specifications of the product?
The Microphone storage space for Income at the mouth is kindly designed.
[Was there anything that disappointed you?
Interior sewing was shoddy, with some gaping from the center and some forgotten stitches. The interior sewing was shoddy, with some gaping from the center and some forgotten stitches.
The Speaker of Income is covered by a Chin strap.
Income mounting is not well considered, as evidenced by the Inner Visor Slide in a position suitable for Income mounting, and there is no suitable flat surface for taping (inevitable floating edges).
How did it compare to other products?
Motorcycles and wears are popular among overseas manufacturers, but when it comes to helmets, they are treated as third-rate products and not even looked at by many people, which is strange until now.
If this is the case ... Helmet of Foreign Manufacturer is no good." It is only natural that this would be the case. I learned a lot.
View detail
Darker than imagined
I knew it would be difficult to see because of the mirror blue, but it was darker than I had imagined.
Of course, closing the Shield at night is very dangerous because you can't see anything.
On the other hand, it may be good on a sunny day.
View detail
Highly functional and comfortable, but looks quite big.
Replacement from arai rapaid neo
Size is XL as well as arai.
The arai had a little more room in the cheek area, so it's a little tight there, but the fit is improved and I have the impression that it's just right.
Glasses are no problem, but IncomeSpeaker is somehow OK if you put it as far down as possible because it hurts when it hits your ear if you put it in JUST the right position.
The volume had to be turned up considerably because it was not in the right position.
Is there ventilation? It is much cooler and more comfortable than the rapaid neo.
It is cosy, highly functional and comfortable, but it looks quite big and I would be happy if it were more compact.
View detail