Reviews
A vital tool for a specific task
Easy to apply the rim stickers with this tool. A couple notes- firstly; absolutely perfect application of the rim stickers was impossible for me. But it's close enough that I'm probably the only one who will ever notice. Secondly: wheel balance weights will obstruct the use of this too & a degree of freehand sticker application will be required, it's not difficult though. View detail
I found it difficult to use myself.
Maybe I am clumsy, but I was able to apply it more neatly when working with FreeBand. If you are dexterous, this is a good product. View detail
Rim stripe easily affixed
Used for Rim stripe installation on YZF-R6 (2019).
When used for water pasting, Rim stripe can be applied quite accurately and effortlessly.
Some adjustment may be necessary where the rim stripe overlaps.
It is also Large cut to paste with Image to push out air bubbles. Removing air bubbles afterwards is also Large cut.
View detail
I would like it to be attached to Rim stripe if possible.
We have applied MDF rim stripe to several (5+) vehicles in the past.
I had to replace my car for the first time in 9 months, and when I tried to apply Rim stripe, I could not find a special Gauge to apply it, so I had to order it again from webike.
I purchased a 6mm width rim stripe and was able to install it without any problem using Gauge, but I would like to see it included or packaged with the rim stripe if possible.
I would also like to see 8mm and 10mm affixed Gauge produced.
View detail
as if it were indispensable
It's so simple, but it's such a good Tool that I don't think I could do without it.
There is a video from the Manufacturer on how to use it.
View detail
Most convenient!
Cheap and easy, anyone can apply Rim sticker beautifully.
It's a great costumer!
However, be careful not to fold the front and back too many times or you risk breaking it! (!)
View detail
Definitely buy it.
I thought it was paper, but it is Plastic.
Mist spray and don't mind getting wet.
If you want to put a Rim sticker on it, definitely buy it.
View detail
It makes a huge difference in the ease and cleanliness of the work!
I thought it was the right decision to buy it, even though it looks chubby.
Using this, I was able to apply it neatly without the need for water application.
View detail
It was simultaneous purchase with an MDF rim stripe. If this gauge is used, it can stick really simply and finely. I thought that what is necessary was just to use a rim stripe and a set since it is not high.
It was simultaneous purchase with an MDF rim stripe.
If this gauge is used, it can stick really simply and finely.
I thought that what is necessary was just to use a rim stripe and a set since it is not high.
View detail
Convenient
Very useful for applying Rim tape.
The time required for pasting can be reduced to a Large width, and the tape is finished neatly without gapping.
It is convenient to purchase at the same time as Rim tape.
View detail
Easy to stick
It will be very easy to apply Rim sticker.
The position of the paste is also well defined.
Recommendation
View detail
That would be handy
I can get by without it, but...
That would come in handy
View detail
This is a time saver for Beauty.
Quantity on Stripe:It is a must-have, so much so that it could be a Set.
At first, we degreased and wiped with Parts cleaner according to the Instruction Manual, and then started applying it with detergent diluted water.
However, with this Gauge, it is easy to paste on Beauty, so I wiped it off with Tissue, dried it, and dared to paste it directly on Beauty.
After all, it was done as expected.
I am very happy that the one shot worked out so well.
Using Gauge, I was able to reduce the time required for dry application to 1/3 of the original time.
View detail
I didn't realize how much work I could get done just by having this.
Without this, if you paste Rim sticker, it is quite Large strange! View detail
On the contrary, it becomes difficult to install.
I bought it to install Rim sticker, but it was hard to install and I didn't need it.
It slips while wetting it with water to stick it.
View detail
Compatible Size is 4mm/6mm wide!
It is important to note that the width of the Rim sticker is only 4mm/6mm, so if you want to use a thicker width, you will have to cut it yourself with a cutter.
It is also a good idea to degrease the Rim with alcohol before applying the Rim sticker, and then spray the sticker surface with a thin mist of soapy water.
View detail
Dramatically easier to apply with a simple jig!
With a little jig like this, I was able to get the paste position perfect!
The price has never been Large at all, so I highly recommend buying it together.
View detail
Now Rim sticker will not fail!
I bought this to put a Rim sticker on my new Special Knife Address 110 for commuting. I used it to stretch 6mm rim sticker. It is good because you can never go wrong with it. View detail
Co-Spa is the best product!
I bought the 7mm wide Rim tape, but it is very easy to apply because I just shave the 6mm wide gauge with a Cutter Knife, unfold it, fold the gauge and apply it along the corner of the Rim. I think that it is an excellent thing that can be pasted almost in a perfect circle. View detail
Rim stripe repositioning won't frustrate you.
Attaching the Rim stripe is quite frustrating and takes a lot of time when trying to fit the four sections together and the overall position of the stripe in a good way, but with this, it's a bang.
However, I'm not sure if I'll have a second chance, so I'm hoping it'll come with Rim stripe for about $200 plus.
View detail