Reviews
Rim stripe easily affixed
Used for Rim stripe installation on YZF-R6 (2019).
When used for water pasting, Rim stripe can be applied quite accurately and effortlessly.
Some adjustment may be necessary where the rim stripe overlaps.
It is also Large cut to paste with Image to push out air bubbles. Removing air bubbles afterwards is also Large cut.
View detail
It was simultaneous purchase with an MDF rim stripe. If this gauge is used, it can stick really simply and finely. I thought that what is necessary was just to use a rim stripe and a set since it is not high.
It was simultaneous purchase with an MDF rim stripe.
If this gauge is used, it can stick really simply and finely.
I thought that what is necessary was just to use a rim stripe and a set since it is not high.
View detail
Compatible Size is 4mm/6mm wide!
It is important to note that the width of the Rim sticker is only 4mm/6mm, so if you want to use a thicker width, you will have to cut it yourself with a cutter.
It is also a good idea to degrease the Rim with alcohol before applying the Rim sticker, and then spray the sticker surface with a thin mist of soapy water.
View detail
Rim stripe repositioning won't frustrate you.
Attaching the Rim stripe is quite frustrating and takes a lot of time when trying to fit the four sections together and the overall position of the stripe in a good way, but with this, it's a bang.
However, I'm not sure if I'll have a second chance, so I'm hoping it'll come with Rim stripe for about $200 plus.
View detail
It should come with the product
It is used to paste Rim stripe on MT-07
This product is a must as it is difficult to apply cleanly with FreeHand
But I've put it up a few times and I always think about it You could have included it with Rim stripe
I think most people are new to pasting, so I think it's kind of nice to include it in the package
(The first time I worked on it, I forgot to buy it and failed to stick it on.)
Even after the second time, if it's an individual, it could be when you buy a new motorcycle, or it could be a few years later It is It seems to be missing such a Small Dice
View detail
It would be nice to have that
I ordered it at the same time as the Rim Sticker, and when I actually did the sticking work, it was very easy to use and It was easy to stick it on
It would be nice if it came standard with the Rim sticker, but it's a Single Item It's hard to buy
View detail
It is an essential item.
When I bought it at the same time as the Rim sticker and used it to install, it was easy to use the Rim sticker I was able to put up the product I'm happy to be able to paste it beautifully without having to worry about alignment
It's a good idea to have a 10?
View detail
It is good as it is not so far.
Because I am made of paper I can not go if I look sweet.
It is pleasant and pleasant as it is strange to use.
If you are not confident, why not try using.
View detail
Easy to use
Although it may be a type of exhaustion type, it is okay to keep it as a tool if you think of Material.
Since it is paper on Material, it will be weak against moisture,
If you change the material, the price will also rise so perhaps the current situation may be the best.
View detail
You can cheap!
It is very easy to paste Rim stripe. 1 pc It can be pasted in less than 5 minutes.
By the way, it took about 10 minutes to bend when I stuck it without using one place.
View detail
I was able to paste easily.
It was easy to put on and clean.
It is satisfying because the price is also cheap.
However, since I wanted to stretch a 10 mm Tape for myself,
Please produce and sell 10 mm wide Gauge.
View detail
The first person is necessities!
"MDF Moody F : Mirror Rim Stripe 6 M "purchased at the same time purchased.
For price, it is reasonable at 205, so if you are not confident in pasting, we recommend you to purchase at the same time. By using it, even I am an amateur, I could paste it quite nicely.
View detail
Attention to the corresponding Size
It is not exclusive to MDFRim tape, but it can also be used for other companies' Rim tape if only Gauge width is met
But I myself purchased 8 mm Rim tape and did not use this Gauge
Please note that it is only 4 mm 6 mm
Cutteretc Gauge width. If you process with (Body is a plastic) I think that it was used.
View detail
Is it expensive?
Buy with Stripe (Purchased at Point).
Working is improved if there is nothing if there is nothing.
Just when I first folded it seemed that there was no problem worried about?.
Just being able to lose it if you do not keep it is Large.
View detail
Adjustment required depending on Wheel
I bought it to VJR 125i because I did not have confidence to put it well.
It is a simple packaging that only Gauge sticks to the attached manual.
Since it was my first work, the attached manual is simple and appropriate, but I also referred to the video on Homepage.
First, it is an instruction to bend 90-degrees, but it cracked easily. (It repaired with Tape from the back. )
Also, it may be a problem of the shape of Wheel, but a part that folds and hits inside Wheel (The direction of narrow Gauge this time) It floated and it could not move steadily.
I cut the threshold that I had at home and adjusted the thickness.
Although it is after adjustment, I used Gauge for the 6 mm wide Tape, with less blur, I could easily paste it.
Although there are few opportunities to use, if there is opportunity to paste it is inexpensive so I think Merit is used.
View detail
Detailed instructions are included although it is a low price!
Purchase to paste Rim tape.
I was deeply impressed to have this instrument with tax included 205 yen, up to the procedure manual to paste Rim tape.
Because the cheap Tape bought separately was a little wide, I used Cutter Knife to spread out the rectangular hole of this appliance.
(I think that it will fit with Tape of MDF)
I also succeeded in pasting successfully, thanks to the procedure manual even I of Rim tape pasting the first challenge.
View detail
It is better to be there
I think that it is an essential item if you paste Rim sticker. It is cheap.
It was able to process after 8 mm.
Anyway, if you have this Gauge and mist, you can stick it well with a monkey.
View detail
Paste work will be very easy!
【What made you decide the purchase?】
When pasting Rim stripe, I thought that it was absolutely easier.
I used it also in the explanation movie of pasting, so I bought it not to fail.
【How was it actually used?】
As you can see in the Instruction Manual and the commentary movie, first let the tip of the sticker pass through the hole of Gauge, then just slide this Gauge and it was attached easily and cleanly.
【Was it difficult to install? (Hard parts case)】
Thanks to this Gauge, sticker pasting was very easy.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Since this Gauge is for 4 mm and 6 mm Rim stripe, processing like image is required to use for 10 mm Rim stripe. (I processed Gauge for 6 mm. )
In this Gauge, the width of Gauge for 4 mm is 5 mm, the width of Gauge for 6 mm is 7 mm, and a hole wider 1 mm than the width of Rim stripe is opened.
So, so that it is 11 mm wide, mark with the ruler and a pen in the inside of the Gauge and cut it with Cutter Knife. (Cut it with FreeHand, but it can be used without problems. )
[Is there anything I was disappointed about?]
Actually I wanted to stick the sticker all over the outside of Rim, but with this Gauge the pasting position will be full inside.
It is safe not to go against the movement of Gauge quietly because the Line will be distorted when trying to stick it to the outside by force using this Gauge.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I want a Gauge to be put on the outside as well.
Also, if you can also sell Gauge for 10 mm you can save time of processing.
【Have you compared items?】
None. There is no substitute.
[Others]
Because it is a small product, you tend to lose track of it when you are absorbed in pasting work.
Also, when working outdoors it is necessary to be careful as it will be skipped if a strong wind blows.
View detail
Rim tape essential item!
The workability is different if there is this and there is not!
If there is nothing, it is only to stretch as a jiwiwa with the spacing between Rim outer circumference intact, but it is a very difficult technique for my clumsy person. This Gauge makes it easy to paste it as it is a guide of the tightening position.
View detail
To improve finish
I bought it together with Rim sticker. At first it did not understand how to use it, but it is better to purchase absolutely for construction errors and finish improvement. View detail