Reviews
not quite
There is not much cutting on the seal, so it is still in place where the Cowl is I was able to put it on some Parts by myself because I couldn't put it on the first time View detail
Good design, installation and function
This product is purchased on a case-by-case basis, and the change in the appearance of the motorcycle after it is installed is the result of I'm looking forward to it It's AllKit and I should have purchased it from the beginning But I think this is the last time I will buy it I am happy with it
View detail
Good design, function and installation
I have purchased the product several times now, and every time I have the opportunity to install it The image of the motorcycle is changed from yellow to blue I feel like I did It feels like it's made in my favorite color I am looking forward to touring again Installation was a breeze View detail
Graphic, shape and details are OK
The color, Graphic, shape and details are OK It was also easy to stick it on After that, the shape of the former motorcycle was replaced more than I thought View detail
Design/manufacturer products OK
I bought these last time and they have changed the feel of my motorcycle The shapability and details are well made so it was easy to apply it I would like to purchase another part of the product View detail
I put it up
There is an Instruction Manual, but the actual work is quite difficult to do
Rear cowl is divided into two parts from the center, and the center part is overlapped It will be a paste
It was very difficult to finish this stacked area and the treatment and finishing of the area near the footpeg
In my case, one of the tips was stretched out because I was applying hot air to it while I was finishing it, so I had to use a different method to make it work under the Seat I removed the UnpaintingCover and cut it a bit
My personal work time was about four hours
We use an air-compression type horticultural sprayer
It's safer to buy a dedicated Squeegee
Anyway, it takes a lot of patience and time, but you'll be happy with the finished product (Lol)
The finished product is much more flashy than it looks in the product image
Will the rim of the rim be able to survive the winter without peeling off?
That's what I'm concerned about
By the way, the Matte paint part certainly sticks without any problems, so don't worry if you're worried about it
View detail
I haven't put it up yet
I think this is the only Decal for the CYGNUSX Type 5 at present
What was different from my expectation was that the Application Sheet, which will be used to align and protect the printed surface as well, has been added to the printed surface It's what didn't happen
If you don't have a Squeegee, misting or degreaser, you can't get a scratch on the printed surface Use Squeegee and provide your own misting equipment Parts cleaner can be substituted for degreaser
Dryer is also a must
As I watched the video, I had the impression that it was quite difficult, so you may not be able to put it up beautifully unless you have some experience with it It is not
Also, depending on the color, the side cover is Matte painted, but I asked MDF It can be applied properly where The answer is that it is
View detail
I think it's good!
Large strange to put up, but once finished, it's pretty, pretty good looking! All in all, it looks like a limited edition product and I'm Large satisfied! I wish I could create one for the other Motorcycles! View detail
A little wrinkle remained but OK
I bought the Front fender last time and it took time to hold the pointed point so long that I got sticky
I did not have a pointed point this time so it worked well Arm's curvature was Large Yeah Dryer use also did not work well with Wrinkle but because it is cheap it will be purchased and replaced when it peels off.
I like Design a lot..
Adhesion for Rear Fender of FX was strong, but the pointed point was peeled again After repairing with low adhesion Bond, please be careful and paste the thin pointed portion before use.
View detail
Is it impossible for Off-road motorcycle?
I tried wearing it immediately after arrival It was very thin and it seemed easy to stretch Design was so so so
Adhesive power is very weak as decals are peeled off the backing Sticky which I had with fingers has already disappeared Even if you revive with Dryer you can peel off as you trace from above It seems easy to peel but peels off even in the wind while driving is. Especially for off cars there are a lot of Timing to wash, so I think that it is impossible for an off car. It was unhappy's happiness not to purchase with Full set.
At the same time I purchase Decal of FX at Rear This is also sticky and strong, it is thick and easy to stretch It seems to prevent scratches etc. I understood simultaneously the difference as it was replaced at the same time. I think that Front will make his own.
View detail
Red likes me
Though I liked the actual thing that I received because I liked it more than I thought, the thickness is 1 compared to NORMAL / Since there are only 3, Cost performance is low scoring.
Pasting was done with two friends with friends, but it is quite difficult to finish without complicated surfaces of Shroud without Wrinkle.
With my skill, I felt it was impossible to work alone.
YouTubeetc how to paste. We advise you to do the work firmly and work hard without spending time.
View detail
Thin but good adhesion and Fitting
【What made you decide the purchase?】 I bought a new Helmet, but I really wanted a graphic model, but I made it a Solid model at a price. So, as a result of considering how Lime green can not be reflected in Helmet, I thought that it would be possible to cut and paste Ninja 250 and klx's graphic kit!.
【How was it actually used?】 Again pasting is difficult, but there is satisfaction in the completion of handmade GraphicHelmet and also attachment attachment.
【Was it difficult to install? (Hard parts case)】 Because it was made thinner, it is a sharp Cutter, I put thick paper on the bottom and cut it. Surprisingly Quantity : Pair (for Left and Right) It was difficult to Cut symmetrically.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Paste the middle first, gradually stick it to Right, Left. Warm up the finish with Dryer and firmly stick it. However, be careful as it will not be good for Helmet if you make it too hot.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?] It was a bit disappointing that the space between Green and Black was slightly uneven.
【Hope for Manufacturer - Please tell me if there are any improvement points】 I'm happy if you pick it up at Manufacturer, which is a violent sticking Graphic for Motorcycle to Helmet.
【Have you compared items?】 None
View detail
Used for pasting Decal
I used it to paste Motocrosser Decal.
It was easy and beautiful finish like a lie that I was doing my best with my fingers.
Size is also exactly good, comfortable to use was also good.
View detail
Fits: YAMAHA WR250X, YAMAHA WR250X
Sharp design is good!
Since I wanted to finish planning to make it Yamaha Inter Color from before purchasing the car body, I wanted to finish it cool with OEM, so I dared not to paste the two places of Fork Guard and Swingarm.
By the way, the White part of Headlight cowl is sticking another Manufacturer object instead of MDF's Decal (There is no Decal of this White part in MDF)
■ Point of work
- There is no problem if you proceed according to the polite Instruction Manual.
- It is NG who blows Parts cleaner to Large quantity in Plastic part, Tissueetc. OK in a small amount.
- Start with small parts to get used to Small and make it easier to postpone the complicated parts and the bigger parts of the area. (In particular, it is better to put it as far as the curved surface part, Light cowl ⇒ Tail cowl ⇒ Side cover ⇒ FFender ⇒ Shroud)
- If there is no soft Squeegee and Dryer at the tip, the curved part can not be pasted on Beauty first.
- Immediately after sticking, raining, car wash, waxing etc etc etc etc. Be careful as it may be hurt by.
- It is desirable to leave it for 2 to 3 days until it is completely fixed (In the meantime, although it stretched and pasted part, it returns to original)
○ good point
- I am safe even if the description of Instruction Manual is polite for the first time.
- Decal's thickness is thinner than imagined Design for emphasis on ease of pasting.
- High convenience that you can easily make Makeover by preference.
Attention point
- It is a feature for WR, the tip of the FFenderCenter part is very thin and it is Dustclothetc. Danger in hanging on hook Large.
- Depending on the location, there are several parts that do not fit slightly with Body line.
- Decal Print at several places in the end part Gap (?) Yes.
- "MDF" The logo of too many impressions (In particular, it is better not to have Logo of Shroud part)
Faded etc etc. Although the durability performance will be verified in the future, if you want a greed a bit more price is cheap, I want a design variation.
In addition to the color change, for example, if more than one DesignPattern is prepared at one place, I think that further combination can give Originality and I think purchasing willingness will rise even more than now. If you like the design that was prepared from the beginning, this product which can easily change the image is considered to be very useful and highly satisfactory as the product value.
Although I wrote various things, it was a very enjoyable time to imagine a complete image of my car before purchasing!
View detail
Fits: KAWASAKI NINJA250R, KAWASAKI Ninja 250
I can not afford it ... anger
Although it is z250, Instruction Manual & Image (Installation image of ninja 250 on DAYTONA's HP) Even if you pass,
Something interferes and TandemSeat does not fit ...
Probably the BuckleGold tool gets hit.
How is HP's ninja 250 attached ... Inexplicable ...
View detail
Conspicuous thing, Konouenashi
I ordered at the same time as purchasing a new car. If you ask Manufacturer you can change it by Brass 2000 yen per color. I changed the color of Main to Red (H1) To Yellow (D4) We have changed to. Since the way of pasting is posted on the site of MDF, if you study well, you can somehow even an amateur.
However, use of Squeegee is mandatory. It has been already over a year and a half, but there is no Large peeling. There was something a little horny, but glue (G2) There is no problem if you carefully repair with. Anyway, because it is unprecedented coloring, it stands out, and I can often call out Honda's new color.
View detail
Individual difference?
In Imechen to RMX 250 S.
Hang Paste while warming with Hair dryer with decal easy to stick. Because the heat of Hair dryer is enough, it is likely to burn if it warms any further.
Due to individual differences in vehicles or because they are disassembling a number of times, the Decal lines of each part are not aligned. Paste each Parts and install it and do not align the Line Graphic will be gapped.
Just obviously there are many places where Gap and the black part of the black are left in the White part and the affixability of Decal itself is contrary. Since it is domestic production, I want the accuracy improvement.
Number Plate and others that seems to be having difficulties have been broken and it was possible to stick without much effort with making it fancy - - - -
Decal Thickness is thinner than I thought, Protection effect can not be expected. It is influenced by the base for Material with good thinness and elongation. Since unevenness and Garbage etc. stand out firmly on the surface firmly enough pasting is necessary to be beautiful enough.
I understand what I would like to promote, but after a while MDF's Logo. In SIDE "FreeRoad model" Logo of.
I understand the feeling, but I little embarrassed so I'm going to put a sticker on each logo...
For degreasing industrial use (For fuel) Recommendation for Alcohol. You can purchase at Homsen. Brakes cleaner hurts resin and hastens deterioration.
View detail
Fits: HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA PCX150
I was satisfied that the installation was Large strange.
I installed it watching animation of installation Instruction Manual and Manufacturer. It took quite a lot of work, and on the way, I almost got frustrated but wearing all Parts. On the day I pasted it seemed like there was no air in, but the next day I saw air in some places. I think that it is persistent work.
The results are satisfied.
View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
R25 Graphic change
I think that COSPA is good even though it is a high Sticker
"Japan Spec of r25. Decal Is not it plain? "
"There's no one on this?"
I bought it if I fucked it
It's rich!
There is quite a gap as contents, so I can only say that I should try hard
I pasted it with water.
Sticker I think that I am pretty accustomed, but it took me three hours carefully. I already do it. ('A`)
View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI D Tracker 125
Instead of painting
MOTARD's exterior paint is difficult, so I put it on Dress-up.
I am happy to sell Rose for each part.
Although a little value is stretched, quality is no doubt.
Pasting Instruction Manual is attached and it takes some trouble but if you paste it according to the procedure it is finished like Decal that is affixed at the time of shipping the new car.
View detail