Reviews
Dedicated Attachment Gauge required
I was a little worried because I didn't know the texture of Mirror red, but it turned out to be good. I applied it with water. There is a little hang at the beginning and at the joints, but it can be easily done if you have a special adhesive gauge. I did it in a small place without lifting up, so it was strange that the surface was too large to show the paste.
Once you press it down, you should not reapply it.
View detail
Easy and stylish!
Fashion starts from the feet up, as they say!
I was torn between Lime green and Titaniumium color, but I chose Titaniumium color because it does not look like OEM.
It is easy to apply and I think you can enjoy Fashion easily!
I used 6mm this time, but next time I would like to try 10mm for more impact!
It is strongly recommended to use MDFOEM's Sticking Gauge for Rim Stripe!
View detail
It's so cool!
14&13Inch
Note the order in which they are put up!
From top to bottom:Front4cards??Rear4cards??RearQuantity:1 Set of 4pcs.??FrontQuantity:1 Set of 4pcs.
Note that it will Gap if it is applied appropriately.
If you look closely, you can see the different lengths.
I thought on my own that the colors would change to rainbow colors,
Originally, each is colored.
Parenthesis is good, so I'm satisfied!
View detail
Very grateful for bulk sales.
I bought a full set of Attacker model some years ago and
When I put it on my XG250 TRICKER, the impression was completely changed and tightened up.
I liked it very much.
A plastic part of the Tail cracked while driving on a forest road.
License Plate can no longer be installed.
I had to replace it with an Assy, so I bought it again.
It would be nice to be able to sell only the parts we need in bulk.
XG250 TRICKER has been discontinued for several years now, so I don't know how long they will carry it.
The Sticker on the Fork and Swing Arm is also in question, so I will try to repair it when the time comes.
The initial investment is high, but it is partially replaceable.
It is cosmetic in the sense that it can be used for a long time.
View detail
Easy to work with
I used this when I pasted Rim tape, and I was able to paste it without gapping. It is inexpensive and I think it is worth buying. View detail
Parenthesis better
The rim tape makes my feet look tighter and improves parenthesis. I love it. By carefully cleaning and degreasing the rim surface where the tape is attached, the tape adheres properly. The rim surface was attached properly by carefully cleaning and degreasing the rim surface. It took about an hour and a half from cleaning to completion, since it was my first time. I am worried about the durability, but it is cheap, so if it peels off, I will just put a new one on. It will be strange to peel off the old one, but.... View detail
High quality and OEM-like cohesiveness.
[How is it used?
I bought a used KLX125 exterior for mountain fun, but it was only black, and I wanted to put some decal on it, Bloody." Fire a." A Tucker." and three types of GraphicPattern, this time A Tucker." I ordered a
Was the one you received as per Image?
I purchased the product as shown in the image because I checked each Pattern on MDF's website, where there are images of the product pasted on each vehicle.
Was the installation difficult?
・・・To be honest, it is a tedious process.
1. thoroughly clean and degrease the object to be affixed.
2. Fill the empty bottle of the spray gun with diluted neutral detergent solution water and spray it evenly on the surface of the object to be pasted.
Peel off the Decal from the backing paper and place it on the object in place.
4. push out the neutral detergent water between the object and the decal with Rubber spatulaetc. after finishing correcting the position.
5. Decal that floats on the surface is lightly roasted with a dryer or the like to make it adhere to the surface.
6. When you get a good feel for 4 and 5, proceed to the next Decal work.
After the work is completed, leave Decal until the adhesion of the glue surface is stabilized, and then install it on the vehicle.
It is difficult to understand in writing, so please watch the video of the work on MDF's Site or check the videos on YouTubeetc.
I worked on it while referring to the video of the work on MDF's Site,
How was your experience with it?
The joy after the hard work of pasting is unmatched.
Especially in my case, relatively docile. A Tucker." MODEL was chosen, so after the work was completed Was this Coloring's MODEL from Manufacturer?" It is so uncomfortably integrated that it seems like a good idea.
[Included Parts:were they on?
Decal and Instruction Manual for the application work are included.
[Was there anything that disappointed you?
It is not a disappointing point, but the difficulty at the time of pasting and the cohesiveness after the completion of the project. It's harder to play in the mountains." There is a point.
Other items that would be helpful
Point and hang of installation
As I mentioned above, the best way is to check it out on video.
My personal opinion is. We'll take our time and work our way through it." is hang? I think so.
[Availability and clarity of the Instruction Manual
Instruction Manual is included in the package, but I think it is faster and easier to understand by watching the video.
[Notes]
You may want to work in a tidy indoor area, as you will want to cry if grease or dust gets on the gluing surface.
[ITEMS TO BUY TOGETHER
Rubber spatula makes draining easier, so it is a good idea to purchase one at 100-yen stores, etc.
[Opinions and requests to Manufacturer
Please continue sales for vehicles that have been discontinued as much as possible.
View detail
Parenthesis is even better than I imagined!
[How is it used?
Purchased for makeover of vehicle body.
Was the one you received as per Image?
It was thicker and more solid than I expected.
Was the installation difficult?
I think it takes time, tools, and sukill to paste it nicely.
How was your experience with it?
I am very satisfied with the "Large" product, which is much more immeasurable than I had imagined.
[Included Parts:were they on?
We recommend purchasing Squeegee separately.
View detail
easy to stick to
It is easy to apply because of its thickness and solid shape.
A misting spray with mild detergent and parts cleaner are required for installation. It is better to use a separate guide for more beautiful installation.
17in. is applied by overlapping each other by about 2 cm, so that the color and Logo are diagonal.
I thought the light reflection made it look like 7 colors, but it is actually Gradation.
Rim sticker is a Commendation by MDF
View detail
Wheel is Parenthesis good
It is not difficult to apply and the colors are good, so it is easy and cool. View detail
If you want to change the look of the Wheel area, this is the way to go.
The appearance around the Wheel and Tire will be Active.
The pasting process is not difficult at all. I have Repeat many times.
When working, don't forget to use a mist of diluted neutral detergent and Squeegee.
For those who want to easily change the look and feel of the product, this is Recommendation.
View detail
I forgot to post the image so I reposted it.
[How is it used?
I built a Wheel for SEROW225WE for street riding, but it is in a somewhat disappointing condition for all the trouble I went through because I built a scratchy Rim on a used Spoke from Stock.
After assembling IRC's GP−210, I put on the MDF Off rim stripe 15mm that I had ordered from Webike.
The harmony of the front and rear Wheels and the body of the car looks very good.
Was the one you received as per Image?
I have been using MDFGraphic's Logo since it was the old Type, so the product was just like Image.
Was the installation difficult?
The process is tedious but not difficult and requires patience.
Refer to MDF's website.
Degrease the area where the rim is attached firmly with Parts cleaneretc.
2. Spray the adhesive surface of Rim or Decal with diluted neutral detergent using a mist sprayer, etc.
3. off rim stripe. [Plain]. ⇒ With Logo and paste them in order.
4. Remove water so that the attached Decal will not Gap.
5. Once the moisture is gone and the adhesive surface is acclimated to the rim, it is ready to run.
As I said above. It's not hard. So, work patiently.
How was your experience with it?
After the adhesive is firmly adhered, it adheres so well that it will not peel off even if the car is washed using a high-pressure washer, as long as the appropriate distance is kept.
The three-layered structure of the adhesive, printed, and protective surfaces makes it somewhat resistant to UV rays, weather resistance, and fading due to deterioration over time (there are limits).
There are also several color variations available to meet the demand for large-size garments, as well as a color custom order plan (additional gold required) that allows you to create your own original off rim stripe.
[Included Parts:were they on?
Off rim stripe for pasting+Instruction Manual for pasting is included.
First-time users should read the Instruction Manual carefully before working on this project.
[Was there anything that disappointed you?
None
Although there are many similar products that are less expensive than this product, there are few products that are simple in design, sturdy, and weather resistant that are Rival.
Other items that would be helpful
Point and hang of installation
Above. [Was it difficult to install? If you practice the method of spraying a diluted neutral detergent and applying it as described in the section "1.", it will take time until the moisture is gone, and if you accidentally touch it during that time, Decal will easily Gap.
If you want to make short work of it, please decide on the inside or outside of the rim and paste it directly on the rim.
Some car models do not have a flat rim side, so sometimes it can be applied beautifully by applying heat with a dryer (be careful how much heat is applied so that the decal does not stretch too much).
[Availability and clarity of the Instruction Manual
In addition to the included Instruction Manual, MDF's Home page includes images and videos.
If you are not confident after reading the Instruction Manual, please visit the Home page.
[Notes]
As long as the basics of Decal pasting are followed, there are no particular difficulties.
As mentioned above, degrease the Rim thoroughly before working on it. Touching the adhesive surface with dirty hands will reduce the adhesive performance, so wash your hands thoroughly before working on it.
[ITEMS TO BUY TOGETHER
Nothing in particular. If you do not have Parts cleaner, it would be useful to purchase it at the same time.
The rest you will have to overcome with spirit, guts, love, courage, and friendship.
[Opinions and requests to Manufacturer
If the price is just a little lower, it can be easily used in more vehicles, so please help us out.
View detail
If you put it on the front wheel, you want to put it on the rear wheel too.
[How is it used?
I built a Wheel for SEROW225WE for street riding, but it is in a somewhat disappointing condition for all the trouble I went through because I built a scratchy Rim on a used Spoke from Stock.
After assembling IRC's GP-210, I put on the MDF off rim stripe 15mm that I had ordered from Webike.
The harmony of the front and rear Wheels and the body of the car looks very good.
Was the one you received as per Image?
I have been using MDFGraphic's Logo since it was the old Type, so the product was just like Image.
Was the installation difficult?
The process is tedious but not difficult and requires patience.
Refer to MDF's website.
1. Degrease the area where the rim is attached firmly with Parts cleaneretc.
2. Spray the adhesive surface of Rim or Decal with diluted neutral detergent using a mist sprayer, etc.
3. off rim stripe. [Plain]. ⇒ With Logo and paste them in order.
4. Remove water so that the attached Decal will not Gap.
5. Once the moisture is gone and the adhesive surface is acclimated to the rim, the rim is ready to run.
As I said above. It's not hard. So, work patiently.
How was your experience with it?
After the adhesive is firmly adhered, it adheres so well that it will not peel off even if the car is washed using a high-pressure washer, as long as the appropriate distance is kept.
The three-layered structure of the adhesive, printed, and protective surfaces makes it somewhat resistant to UV rays, weather resistance, and fading due to deterioration over time (there are limits).
There are also several color variations available to meet the demand for large-size garments, as well as a color custom order plan (additional gold required) that allows you to create your own original off rim stripe.
[Included Parts:were they on?
Off rim stripe for pasting+Instruction Manual for pasting is included.
First-time users should read the Instruction Manual carefully before working on this project.
[Was there anything that disappointed you?
None
Although there are many similar products that are less expensive than this product, there are few products that are simple in design, sturdy, and weather resistant that are Rival.
Other items that would be helpful
Point and hang of installation
Above. [Was it difficult to install? If you practice the method of spraying a diluted neutral detergent and applying it as described in the section "1.", it will take time until the moisture is gone, and if you accidentally touch it during that time, Decal will easily Gap.
If you want to make short work of it, please decide on the inside or outside of the rim and paste it directly on the rim.
Some car models do not have a flat rim side, so sometimes it can be applied beautifully by applying heat with a dryer (be careful how much heat is applied so that the decal does not stretch too much).
[Availability and clarity of the Instruction Manual
In addition to the included Instruction Manual, MDF's Home page includes images and videos.
If you are not confident after reading the Instruction Manual, please visit the Home page.
[Notes]
As long as the basics of Decal pasting are followed, there are no particular difficulties.
As mentioned above, degrease the Rim thoroughly before working on it. Touching the adhesive surface with dirty hands will reduce the adhesive performance, so wash your hands thoroughly before working on it.
[ITEMS TO BUY TOGETHER
Nothing in particular. If you do not have Parts cleaner, it would be useful to purchase it at the same time.
The rest you will have to overcome with spirit, guts, love, courage, and friendship.
[Opinions and requests to Manufacturer
If the price is just a little lower, it can be easily used in more vehicles, so please help us out.
View detail
Coordinates with front and rear Wheels
[How is it used?
I made SpareWheel of SEROW225 WE used for mountain play, so I ordered MDFOff rim stripe from Webike for Wound hidden&Coordinates with IRC's GP-210 assembled for street riding.
Since the front wheelRim was treated with black anodized finish, we chose red letters on a black base to match the color of the front and rear.
Did you receive the item as per the Image?
I have been using MDFGraphic's Logo since it was the old Type, so the product was just like Image.
Was it difficult to install?
The difficulty level is low, but the so-called "Bothersome" It will be a work in progress.
MDF's website. Spray diluted neutral detergent with a mist, etc. on the wheel rim that has been thoroughly degreased with Parts Cleaner, and apply the Off rim stripe in the order [Plain] [with Logo]. and is clearly posted in text, photos, and video.
As I said above. It's not hard. So, work patiently.
How did you like it?
Once the moisture is gone after application, it adheres firmly to the Rim, and even when washing the car using a high-pressure washer, it adheres well enough that it does not peel off as long as the proper distance is kept.
The three-layered structure of the adhesive, printed, and protective surfaces also makes it somewhat resistant to ultraviolet rays and highly weather resistant.
ColoringVariation is also Red, Green Light, Blue, and Color.:Several patterns are prepared based on yellow, and it corresponds to the importance of the Large size range, and also corresponds to color custom order PRAN. Your own off rim stripe can also be created.
Was "Included Parts:" attached?
Off rim stripe for pasting+Instruction Manual for pasting is included.
First-time users should read the Instruction Manual carefully before working on this project.
Were there any disappointments?
There are no performance problems.
There are many similar products that are less expensive than this product, but there are few products that are simple in design, durable, and weather resistant, and I think they hit the right spot.
Other items that would be helpful
Point and hang of installation
Above. Was it difficult to install? If you practice the method of spraying a diluted neutral detergent and applying it as described in the section "1.", it will take time until the moisture is gone, and if you accidentally touch it during that time, Decal will easily Gap.
If you want to make short work of it, please paste it directly on the inside or outside of the Rim, and you will be able to do it by the time you finish pasting Wheel1 pc (I am a direct pasting without using neutral detergent).
Some car models do not have a flat rim side, so sometimes it can be applied beautifully by applying heat with a dryer (be careful how much heat is applied so that the decal does not stretch too much).
[Availability and clarity of the Instruction Manual
In addition to the included Instruction Manual, MDF's Home page includes images and videos.
If you are not confident after reading the Instruction Manual, please visit the Home page.
[Notes]
As long as the basics of Decal pasting are followed, there are no particular difficulties.
As mentioned above, degrease the Rim thoroughly before working on it. Touching the adhesive surface with dirty hands will reduce the adhesive performance, so wash your hands thoroughly before working on it.
[ITEMS TO BUY TOGETHER
For 4mm or 6mm Rim stripe, MDF sells Gauge for attachment, but this product is not compatible because it is 15mm in diameter.
[Opinions and requests to Manufacturer
If the price is just a little lower, it can be easily used in more vehicles, so please help us out.
View detail
With Guide, it's easy.
It is possible to paste without Guide, but I bought Guide just in case and it was very easy to paste.
After thoroughly removing dirt and degreasing, I applied the paste while misting it with water mixed with a small amount of neutral detergent and crimped it while heating it with a heat gun.
It has been washed and rained on several times, but so far it has not peeled off at all, so it seems to be quite durable.
I like it because it is Accent.
View detail
If the Rim width fits, ◎
Depending on the Rim width, there may be a bias, so the center position may be gapped. However, it is easy to apply and mistakes are not likely to occur. If you are a first time user of rim tape, you may want to buy it, but if you are a second time user, you can use FreeHand without a guide. View detail
Perfect for Accent on your feet.
The 10mm width is very impressive, and there are no problems if you apply it according to the instruction manual. I bought the guide together, but it did not fit my CB1300 wheel well, so I applied it by hand. It was not so difficult to apply by hand. It is important to wash, dry, and degrease the wheel before applying and to spray it with a neutral detergent solution when applying. View detail
Coating installation vehicles may be prone to peeling?
[How is it used?
MDFBird Corroe previously attached to another car model. "Re." I liked the Rim stripe, so I decided to use the Bird corroe made of the same MDF. Le." I purchased a rim stripe and used it on my GSX-R125.
Was the one you received as per Image?
I think it's a little more flashy than the TricoloreRim stripe I bought before, but not vulgar. I think it is a little more flashy than the TricoloreRim stripe I bought before, but not vulgar? I interpret it in a good way.
Webike's review is good because it is easy to get an image of the product because everyone has posted a picture of the product pasted on their Motorcycle, which is their pride and joy.
Was the installation difficult?
As I mentioned in another Review, the work Difficulty." rather than "Bothersome" is a strong feeling.
I have used MDF's Off rim stripe (a product that is just the right width for off-road motorcycle rims) several times in the past, and in the beginning Spray the adhesive side of Decal with diluted neutral detergent using a mist, etc., and stick it in place while adjusting its position." The method was used for construction.
Merit of this construction method includes "Gaps that occur during the application process can be easily corrected." As for the Demerit. It takes time for the adhesive surface to settle down after the water sprayed on the adhesive surface evaporates, so it takes time before it can be ridden out." That was the thing.
Currently sold by MDF. "Sticking Gauge for Rim Stripe" For more information on using this product, please see the video in the product section of Webike's website. 。
The Merit of using Sticking Gauge for Rim Stripe is that It can be applied to Beauty in a fixed location on the Rim without the use of diluted neutral detergent and water." The fact that the adhesive can be applied to Beauty without using a neutral detergent diluent shortens the time required for the water to evaporate and the adhesive surface to settle, allowing the user to ride immediately after installation.
How was your experience with it?
I thought it might not match because my motorcycle body was Blue/Silver with Black Wheels. I thought it might not match, but I put it on...well, personally, I thought it was a nice touch. (It is about the balance of the color scheme, and there is nothing wrong with the product.)
This is sufficient because the purpose of this component is not to improve performance.
[Included Parts:were they on?
This product + Instruction Manual with instructions on how to apply the product is included in the package.
[Was there anything that disappointed you?
We have used the company's sister product several times and have not been disappointed.
Other items that would be helpful
Point and hang of installation
Please apply it after thorough surface preparation (cleaning & degreasing) of Wheel.
Plus to what is mentioned above. Tricolor Rim Stripe are for Decal with letters and Plain Decal, please put them in order from the top of the Decal on the base paper.
Read through the Instruction Manual carefully for these and other information.
[Availability and clarity of the Instruction Manual
As mentioned above, Instruction Manual is available.
The contents are illustrated and easy to understand.
[Notes]
As is the case with OEMDecal, it will peel and fly off if used too close to a high-pressure cleaner.
Sold by the company Off rim stripe Unlike the "RimDecal", the RimDecal contains enough rim stripe for one motorcycle (for front and rear wheels) (Off rim stripe must be purchased separately for 21-inch front wheel and 18-inch rear wheel).
Glass coating is difficult to adhere to and tends to peel off easily. I have heard that, FYI.
Items to be purchased together
Made of MDF as mentioned above. "Sticking Gauge for Rim Stripe" If you are not confident about it, please refer to the following page (priced at 210 yen including tax).
If you do not have it, you should also purchase Parts cleaner, as you will need it when degreasing.
[Opinions and requests to Manufacturer
I wonder if the price could be a little bit lower.
View detail
Mirror gold
I purchased 6mm Mirror gold. I applied it without Gauge. I cleaned the applied area, degreased it carefully with Silicon-off, sprayed it with water containing dishwashing detergent, and finished it with Dryer. It has been summer and winter since I applied it, and so far there is no sign of it peeling off. View detail
The thinning liquid is a Large thing if the procedure is followed.
I tried my first ZDress-up.
After much research and hesitation, we decided on Mirror violet, with the theme of casually shining and glowing.
The first step is to install the wheel, using MDF Scale, which I have used before, and first degrease the wheel thoroughly with Silicon-off.
After the entire wheel is removed, the adhesive is simply applied using Scale while spraying a detergent thinning solution.
I followed the procedure to paste one of the 4 stripes, but it suddenly peeled off, failed, and fell to the ground, unusable! I try to paste one more piece, but it feels slippery?
The cause was that when making the diluent, the amount of neutral detergent was wrong and there was too much detergent, so the adhesive was not strong enough and it fell like a stream...
After adjusting the thinning liquid again, the adhesive strength improved and work proceeded smoothly, but there was no room for error, so we proceeded with caution and care.
After that, I managed to complete the job on all four wheels in one shot, and upon confirmation, a drop or two of detergent in the thinning solution should be enough!
Small diameter wheels have a large bend, so even if you use a dedicated scale, you need to be careful.
The impression of the finished product is quite good, with a very austere appearance.
When the sun is low in the morning and evening and light reaches from the side, Mirror's flamboyance is emphasized. On the other hand, when it is cloudy or at night, it gives the impression of a dull reflection and glow.
The Violet is a darker color, so it is not so noticeable in the absence of light.
I have been using MDF's Stripe for a while now and the durability is excellent, the thickness and quality are definitely better than cheaper ones, but a word to MDF, can you please make the Small Diameter WheelSpec. in a little more quantity instead of just two spare sheets?
Large and Small diameter Wheels with bends require a lot of construction work and hang.
Even with the use of a dedicated Scale, the work was not as nerve-wracking as it could have been.
View detail