Reviews
Wiring branch connections are easy and good.
The differences in Cable size and current capacity are easy to recognize depending on the color.
Note that the Cover is divided between the main line side and the branch line side.
*Because the blade directly bites into the sheath for connection, use in locations with a lot of vibration may result in disconnection or poor contact.
*Care should be taken not to reuse the area once used.
It is easier said than done, since the connection can be made with just one pliers....
View detail
It was Waterproof.
I bought this one for ManualON/OFF of auxiliary equipment because this one was Waterproof Type.
It looks a bit Large, thick, and heavier than I expected.
The appearance is good with Waterproof Specification, but I wanted something that is about half the size and weight of Large.
I wish the Wiring was a little longer so I wouldn't have to worry about the mounting position.
View detail
Gasket cannot be used for hazing.
It's thick. It's thick anyway.
It is thicker than the general ones made of Gold.
Also Material:Because it is plastic, the strength is very weak, and it was not possible to remove the stuck Gasket. Finally, I had to grind the slotted screwdriver with Grinder.
Of course, you should not damage the surface per surface.:I think PlasticScraper is an option, but I don't think it's too easy to use and I don't think I'm going to repeat it.
View detail
Useless...
I put it on to power the Cigar socket in my car....
The result was an expected haGap.
[Was there anything that disappointed you?
This product is on the female side, and the other ornaments are on the male side, but the feel is too loose when you insert it. It was too loose to touch and was not useful.
Do you have any wishes or improvements you would like to make for the Manufacturer?
There are a number of Siga-Soke power supplies, but they should be standardized.
Please make a product that you can get into exactly ….
What made you decide to buy?
That it came with Harness to get the power from Fuse.
This was a nice point as I could easily get power from the Fuse box.
How was your experience with it?
As mentioned above, I discarded it right away because it had poor contact and would restart due to vibration.
Was the installation difficult?
As mentioned above, it comes with Harness, which gains + power from Fuse, so installation was very easy.
【Please tell me the installation point and hang】
It's a good, inexpensive product if it's in a vehicle or location that doesn't get much vibration and it works well with the MaleSocket.
[Included Parts:were they on?
I liked the fact that it comes with a Harness that gains power from the Fuse.
View detail
AmonEmon Fuse clip Commerce Product No : 1280
This Emon's Fuse clip was very cheap as well as very cheap, so I purchased it because I wanted to carry it in the loading tool box of Motorcycle.
In order to extract the Mini Flat Type Fuse and the back fuse securely entering the terminal of the Fuse box, we could not escape by just the force of pinching the fingertips, so until now Radio pliers etc were necessary by now.
However, if you use Emon's Fuse clip, it is very handy because you can easily pull out Fuse.
The tip of this Emon's Fuse clip is shaped so that you can grasp the back part of the Mini Flat Type Fuse and the back Fuse tightly, so if you grab it, you can simply pull the Fuse out by pulling it with a light force in front It is made to be able to do.
It is not a translation that I expected, but since it is a one piece resin molding, the appearance is cheap feeling is very strong.
The price is really cheap.
However, as a function we have enough so please rest assured.
Also, Emon's Fuse clip says that Polyacetal with sufficient strength is used as a material, but this Emon's Fuse clip when pulling out a Fuse from a car-mounted Fuse box using this Emon 1280 Fuse clip If you do twisting obliquely, the corner of the Fuse clip's entrance will be easily broken and will be damaged, so when using it carefully pull in parallel slowly to recommend that you use it To do.
Although the price is 100 yen + consumption tax degree product, strength is suitable for the price, so depending on usage Fuse1pc. Quantity from : 2pc. Just by pulling out Set, this Emon's Fuse clip may be lost soon, so careful handling is required from everyday.
I am concerned about the strength of Emon's Fuse clip, so I will use RadioBench when pulling out Fuse by regular maintenance, this Emon's Fuse clip is dedicated to car fuse box It is inserted in the gap of inside and it is inserted.
Anyway, although there is a part which is a little fragile, it is not a burden at all as it is a tool of price of about 100 yen + consumption tax as a tool for the case of emergency.
.
View detail
AmonEmon Non-Shock tape Commerce Product No : 1750
【What made you decide the purchase?】
When fixing Clamp etc. to Motorcycle's Handlebar, I bought this EmonITEM No, 1750 Non-Shock tape as a Spacer for its rotation and prevention of Direct Wound at installation.
【How was it actually used?】
This EmonITEM No, 1750 Non-Shock tape is a 2 mm thick Cushion Tape with one side adhesion, so it is easy to use and it is very useful.
【Mounting was difficult?】
Since only one side is an adhesive surface, you can easily paste it and use it.
However, since the adhesive strength is strong, it takes a lot of labor to peel off after pressing down.
Let's paste so as not to make a mistake.
【Please tell me the installation point and hang】
Because this EmonITEM No, 1750 Non-Shock tape has a thickness of 2 mm, the point that is not too thick such as 2 mm is a convenient Point..
[Is there anything I was disappointed about?]
It is not that much disappointment, but this EmonITEM No, 1750 Non-Shock tape was Neoprene rubber rather than board Rubber series so Cushion nature was softer than I thought.
【Hope for Manufacturer - Please let me know if you have any improvement points]
This EmonITEM No, 1750 Non-Shock tape has a width of 30 mm, but it is glad because there is a non-shock tape with a width of 50 mm will increase the range of use applications.
【Have you compared items?】
It was compared with the company's non-shock tape thickness of 5 mm.
If I use it like a cushion sheet, I would like to increase the Shock absorption effect by using a thickness of 5 mm, but since I wanted to use Spacer like, I purchased this EmonITEM No, 1750 Non-Shock tape 2 mm thick this time Did.
[Others]
I think that the bonding strength of this EmonITEM No, 1750 Non-Shock tape is a strong one, but by all means the adhesive strength of this adhesive surface seems to weaken if the temperature is high.
I do not rely on adhesion because it is used like Spacer, but this EmonITEM No, 1750 Non-Shock tape is easy to peel off easily in the hot summer season, so please be aware of it Please be usable.
.
View detail