Reviews
Bigli handled by Web!ke
0.The thickness is 5sq, which is often used for car audio system decks and the like. View detail
When replacing Oil and Filter
Used when changing Oil and Filter in GSX1300R HAYABUSA. 5 liters container is about this much.
They did a good job for the Gold amount.
View detail
If you use motorways, by all means, take it with you!
I think Standard Equipment is good enough for Large Motorcycle. If possible, I would like to see a VERSION that is not a magnet type, such as a clip type. (The recent SUPERSS has no place to use steel tanks or other magnets) Also, it would be nice if a storage bag or case was attached if possible. View detail
To paste Emblem
It was used to install an Emblem that was removed due to TankRepair.
ZrX1200R used this one because the Emblem is one letter each, so I thought it would be a fine double-sided one.
It was quite large and odd, but I was able to install it.
View detail
For easy power pickup
Used to get power for drareco
Easy power supply from Fuse box
However, the Wiring is caught on the Cover, so a little modification is required.
View detail
Cost-effective and time-saving
Used to extract DC power from XR100.
The items used were AC-DC converters, Relay, rectifying Diode, and EDLCSUPER capacitors.
The intended use is Electric Type Meter and USB and Portable navigator power supply.
I took a countermeasure because when Portable navigator is half-wave rectified, it often does not turn on at startup.
There are many rectification diodes available, but we chose this one because of its reliability and the cost of taking out and producing it, considering the time and effort required to make it.
It would be sufficient to use a battery type, but we want to make it maintenance-free, so this is what we have done.
Half-wave rectification DC extraction of RegulatorRectifier has been installed in advance.
View detail
Reliability used to date
Used to extract DC power from XR100.
The items used were AC-DC converters, Relay, rectifying Diode, and EDLCSUPER capacitors.
The intended use is Electric Type Meter and USB and Portable navigator power supply.
I took a countermeasure because when Portable navigator is half-wave rectified, it often does not turn on at startup.
There are many inexpensive Relay products available, but we chose the smallest and most reliable one we have ever used.
It would be sufficient to use a battery type, but we want to make it maintenance-free, so this is what we have done.
Half-wave rectification DC extraction of RegulatorRectifier has been installed in advance.
View detail
You can make it yourself, but buy peace of mind.
Useful for DIY of electrical components
Frankly, I could easily make something similar myself.
I use ready-made products because they are somehow safer.
View detail
That would be handy
It would be useful for electrical DIY.
This is one product you will want to keep in your tool box with Electric Works Pliers!
View detail
Essential for DIY of electrical components
It's a must for DIY electrical components.
RedBlackDouble is easier to compile during Wiring!
These are the parts you want to keep in your toolbox along with Bullet Terminal and Electric Works Pliers.
View detail
LED bulbs installed behind the Number
It is a solid making
Rust will not occur.
The LED bulb is mounted on the Screw behind the Number.
View detail
Battery brush
I had never heard of a product called Battery brush and the price was reasonable, so I bought it to try it out.
It is surprisingly more usable than I had imagined.
Brush can be used outside of the Battery terminal with good hardness.
I would like to use it for a while and buy more.
View detail
That's Emon!
This is a waste oil disposal pack with a corrugated ball, which was common in the past, but the corrugated ball of the outer box has been changed to a sturdy paper bag made of Craft paper.
I purchased the 6.5L Large size this time, and it is almost as compact as the 4.5L size I have been using. I was concerned about the strength of the outer craft paper when placing it on the floor, but when I actually use it, it is so strong that I do not mind.
It takes up less space when stored, and most importantly, it is very easy to dispose of the waste oil after putting it in. I used to put the boxes in Garbage bags just to be safe, but the newer Garbage bags are easily torn, so I had to be careful not to tear the bags right at the corners of the corrugated ball. The new Emon Littering pack is a bag so it is easy to put in the Garbage bag.
From now on, the waste oil treatment pack will be switched to this Emon littering pack!
View detail
Compact than Corrugated cardboard
I had always purchased corrugated balls, but the corrugated balls were large when delivered and took up a lot of space when disposed of.
I bought this product to try it out and it is a paper bag, Compact and very good.
I am satisfied with the product as it sucks oil well and comes with a Tie Band.
View detail
For Wiring Processing
This is essential for Wiring processing.
They are inexpensive and come in a variety of colors, making them very useful.
View detail
For back-up and earth installation
Used for Wiring installation of electric heat.
Emon for peace of mind and the number is just right and cosy.
View detail
MAJOR JSTConnector and ultra-thin Waterproof standards are a bit more difficult.
I bought it because I often use JSTConnector or aftermarket parts with JSTConnector for electrical customization, and the size of the pliers cannot be handled by normal Electric Works Pliers.
The texture and construction is very good and can be worked on at least once.
I'm not sure where the Crimp function is used other than INS, but the Manufacturer's description says it is used to crimp the core wire. (AWG28-22) I've been told to use the INS part, but I've never been able to get it to work, so I've been doing everything with the INS part.
The INS part is also very delicate, and the cladding on the Female side of the JST is problematic, and almost 100% of the Base part is pinched and distorted. Type "W" The Male side is fine.
I don't know exactly why it is W-shaped, but I think it happens in the Clearance setting, which is inevitable as a Universal Product.
It is good to use a distorted connector terminal with a distorted crimp, but I use a solder to fix the core wire because it tends to fall out (although it does not make much sense to tighten the sheath part …).
Well, JSTClass would be better to use a dedicated Caulking Tool, but it is expensive!
This product is quite inexpensive and works well enough, so I have no complaints. The Thin Connector. I strongly recommend it to anyone who plays with
View detail
Small size, so it can be put anywhere.
The reflector for the DAYTONA-made License PlateFrame had somehow flown away, so we have attached this one in its place.
MONKEY has a built-in reflector in the Tail Lamp, so it is not necessary in the first place, but it is nice to have.
It has a cheap feeling, but for those who are not particular about it and want it anyway because it would be illegal without it, it is good because it is small, so it is not difficult to find a place to install it, it can be detached, and it has a Tape.
View detail
5Quantity:Set is also included
You don't have to buy this kind of thing, but you can branch out by making it yourself using two Wiring sticks, but, well, it is easier to have it than not.
This eliminates the worry of wire breakage rather than putting two Wiring together.
5Quantity:I think this price is reasonable for what is in the Set.
View detail
Generally the same as Velcro, Inc.
Used to fix ETCUnit attached to VTR-SP.
I was using the extra Velcro from Velcro that originally came with Power commander 5, but it was coming off due to lack of area, so I used an additional Emon product.
The performance of the Magic tape was not inferior to that of the Magic tape, and it was firmly fixed in place.
It is a little looser than Velcro, but Velcro is too strong to begin with, so it is just right.
The performance of the double-sided tape section is generally about the same or slightly stronger.
Velcro is a USA product, and the double-sided portion is strong, but this product from Emon also sticks firmly.
This area is very different from the cheap 100s.
However, the double-sided portion is quite weak once it is peeled off, so it is a one-shot deal and requires careful positioning.
There is no Negative in particular, but if I had to say, I would say that a little more quantity would be nice.
But since the original Velcro is sold in American style with the smallest length being 46cm, and the price is a little expensive in Japan, it would be more convenient to sell it in a cut-off size with a length and price like Emon's.
View detail