Reviews
Compact, lightweight, practical and good
A practical item that is cheap but necessary and sufficient. View detail
For power supply branching
I used this one because I thought it was easier to use than making my own, and there were no crimping or missing parts.
Since it is a ready-made product, it is not possible to make subtle length adjustments, but it is well made.
View detail
Recommended if you want to DIY power supply
If you are a DIYer who installs USB power supply, electric heating equipment, etc., you should have one of these to get the job done.
It is also useful to know the +- polarity
View detail
Good and tiny design
I brought long time ago.But ididn't get time to install.This is push on switch (normally open) Finally I get time to do my DIY projects.I used as a car horne switch controller. Very tiny and solid design. On switch top printed "push on". switch operations is smooth. Made in Japan product.Recomenderd for DIY projects. View detail
The ordinary Binding Tape
[How is it used?
Used for maintenance of Harness.
Was the one you received as per Image?
The product is exactly as shown in the picture.
How was your experience with it?
It is easy to use because it can be used just like regular Vinyl Tape.
[Points to note]
Not particularly
How did it compare to other products?
Do not use Vinyl Tape to tie them together.
View detail
Buy this before you buy the expensive ones.
[How is it used?
I purchased this to check the disconnected part of the Blinker harness.
Was the one you received as per Image?
As per image.
How was your experience with it?
I don't have a Meter or anything like that.
It is easy to use, and it glows red when energized.
In this case, it was just to check the power, so this was sufficient.
[Points to note]
I don't know about voltage and such.
Only check for electrical current.
How did it compare with other products?
It was cheap and I needed it urgently.
View detail
Preliminary Fuse
When I changed to 6V MONKEY/GORILLA Main Harness of Other Brand Product, Fuse box was attached, but it was Mini Flat Type Fuse, and I shorted it at the time of power supply branching, so I purchased 5 boxes, which is a lot for spare parts.
For some reason, the selling price seems to vary with the number of A's.
View detail
Easy to use
It was very easy to use.
But a little bit of Oil was oozing out of the bottom.
View detail
Cheap and easy to use
You can use anything from Oil to Gasoline.
I purchased this for my Oil4Liter cans.
It has a wide range of applications!
I have no complaints at this price, but if I had to say, I would have liked it to be 5 cm longer.
View detail
Easy to use
I purchased this product to replace the Screen on my New ModelPCX125 JK05.
I used it because it looks hard and Large strange to remove the nail when removing Garnish.
The hardness was perfect and very easy to use.
If you have one, I think it will come in handy in the future.
View detail
Fuse Removal
I thought it would be easier to use the special Clip for Fuse removal to remove it without scratching it.
I use it infrequently, but it is nice to have 1 pc. because of its low price.
View detail
spare
I replaced the 6V MONKEY/GORILLA Main Harness with another company's 6V MONKEY/GORILLA Main Harness and shorted it when I reconnected the electrical system, so I bought this as a spare.
Quantity:1 Set of 3pcs., I don't think I will use all of the stones, but the price is not that much, so it helped.
View detail
Easy to use Large size
Since it is 50cc, it had sufficient capacity.
Also, since it is not that high, it is easy to get under the Engine and the work was done Smoothly.
However, gloves etc. were not included, so you have to provide your own, but for the price, I don't mind at all.
View detail
Connection
Type 110, Cable branch, used for connection.
Male、FemaleQuantity:Set and a little extra in number, it was just right for a spare.
View detail
Replace with new Connector
The Coupler I was using was discolored and hard to remove, so I purchased a new one to replace it.
Male, MeSpin, and Coupler set items were inexpensive and saved me a lot of money.
View detail
Refreshingly summarized
I purchased this for use with a Switch on a Cycle alarm that gets its power directly from the Battery. The reason why I needed to install the Switch is that I do not use the Alarm when I leave it at home, so I could not accidentally operate the Quantity:We decided to install a switch just in case it is set to run while we are away from home, or to prevent the battery from going up because of it. I don't think it will malfunction if I don't operate it in a strange way, but just in case.
Cycle alarm is intended to be used when leaving the vehicle for touring, shopping, etc., so we plan to install a Switch in the Space under the Seat and use it to turn the Switch on when departing if Cycle alarm use is expected.
Initially, we had installed our own Torg Switch, but it did not fit into the Space under the Seat, so we purchased this Torg Switch to replace it.
I am satisfied that it fits tightly, but I think it is a bit expensive.
View detail
disconnection
Since the Cable came off during Connector removal, it is used to crimp the Cable to the terminal again.
We were able to use just the right number of pieces.
View detail
defective contact
It is used for reassembling due to poor contact of Cable.
I wish there were a certain number of pieces, but I don't think the cosmetics are very good.
View detail
Wire standards
Both EmonAV1.25sq and DAYTONAAVS1.25 are probably stranded wires, but Emon has a thicker and softer coating, while DAYTONA has a thinner and harder coating, which is said to be similar to OEM harness. Incidentally, "sq" stands for "Square," and "AWG" is called "Gauge" (AmericanWire gauge) in the United States wire standard, indicating the cross-sectional area of the conductor section. AWG16 = 1.25sq = 1.31mm2. The larger the AWG number, the smaller the cross-sectional area. If it is just 1.25 and only a number, it may be the diameter of the conductor, but is there any diameter notation for stranded wire? View detail
Easier to use than before!
I have been using Emon's Littering pack for some time and had confidence in its performance.
This is my first purchase since the change to paper bags.
First of all, the Size is very Compact and very good when the product arrives.
I also appreciate the lack of bulky storage until the day of the actual Oil change.
The paper bag itself is folded once all the way open, so it is convenient to adjust this area depending on the type of car.
It also freed us from Stress, which causes the bag to tear at the corners even if it is put in a Garbage bag after the waste oil is added.
As a precaution, I think it would be a good idea to frequently check the paper bag for open folds while the Oil is flowing.
I guess I was not folded properly and the paper bag gapped and overflowed with Oil during the waste oil.
I think we should adjust this area as we see fit, so this is something to reflect on next time.
Overall, it is very easy to use and I will continue to use it exclusively.
View detail