Reviews
Easy to use
I purchased this product to replace the Screen on my New ModelPCX125 JK05.
I used it because it looks hard and Large strange to remove the nail when removing Garnish.
The hardness was perfect and very easy to use.
If you have one, I think it will come in handy in the future.
View detail
Motorcycle with Cowl should buy it before you regret it!
I purchased this product (adjusting for shipping costs) for the installation of a car's drareco.
You can get by without it, but you can scratch it when removing the lining, and it is easier to remove the Clip, so you can do a more careful job if you have it.
Actually, I seem to have made a mistake when removing the Motorcycle Cowl, and there is a spot where I broke a nail before I knew it. I think it could have been prevented if I had used an inner lining remover properly.
By using the inner lining remover, it will be easier to apply force to the nail/Clip part, so I will use it from now on to prevent damage.
If you do not have one, we recommend that you purchase one, as it will come in handy in your tool box.
View detail
Easy to use
It is a tool that uses the Lever principle to remove the interior of a car or other object.:Because it is plastic, it was easy to work on without scratching the interior. It is a standard product, but it is very useful. View detail
Dismantling essential
The motorcycle I ride is YAMAHA NMAX155. If the scooter needs to be repaired, you need to remove a lot of covers. If you use a metal pry, it is easy to damage these plastic parts. This amon plastic pry bar is very useful, and it is easy to remove the covers. There will be no damage, and the resin nylon is also durable. -------------------------------------------------- -------- The motorcycle I rode is YAMAHA NMAX155. If the pedal motorcycle needs to be repaired, many coverage parts need to be disassembled. If you use metal pry, it is easy to damage these plastic parts. There will be no damage, and resin nylon production is also durable. Powered by Google Translator View detail
Just the right thickness! Easy to use!
I use it to remove Cowl from Ninja250SL. Anyway with moderate thickness and hardness.
Easy to use! Recommendation to remove the Cowl from Full CowlMotorcycle!!!!
View detail
"Japan" Artisan handmade Scissors at this low price!
As the title says, each piece is handmade by hand by craftsmen in Japan.
This low price! And it has a fluorine Coat finish that prevents Tape from sticking!
Level high quality that I'd honestly buy it even if the price tripled! I recommend it to everyone!
View detail
Not sticky and easy to use
[Purchased for.
I replaced the Blinker with an Other Brand Product, but the wiring was more exposed than I expected, and although I think the product is Large and sturdy, it looked ugly, so I bought it for protection and to fix the appearance.
Impressions of use
While the Vinyl Tape on the market is sticky and not heat resistant, this one is not sticky and sticks to Beauty without stickiness, and it is also heat resistant, so it is perfect for wrapping Motorcycle wires and such!
It was very easy to work with because it was not sticky and I could take it off and rewind it again if I felt I had made a mistake.
Thanks to Wiring, we were able to hide and protect it very nicely, so if you are in the same situation, please give it a try!
【Review】
Cosy, no complaints!
Wiring is now clean!
View detail
Convenient to have
I bought this because the Cowl claw on my CT125 is hard.
It is very different without it.
I was able to remove the hard nails without breaking them.
View detail
Heat resistant and easy to use!
We used it for Joint protection of SensorWiring near the Engine, where normal Vinyl Tape would melt due to heat.
It is not sticky like regular Vinyl Tape and is smooth and easy to use.
I didn't know this product existed until now, but now it is really useful.
View detail
Easy to use
Its high heat resistance makes it ideal for HarnessWiring treatment around the Engine.
Excellent and easy to use as an insulated Tape.
Vinyl does not harden under heat and is very easy to use with little sticky glue when peeled off.
View detail
I use it for Wiring Binding by Engine
I use this product for Wiring Binding of Engine Soba, it is just as it says in the Package, it does not melt in heat and it is durable! View detail
That's the exclusive product
Double-sided tape can be cut cleanly because the adhesive does not remain on the blade of the scissors.
Ordinary Scissors would get stuck to the blade, but these are specially designed for this purpose, so they are easy to work with.
View detail
peeling off
I bought this one because I thought I could remove the bad dirt and Sticker without scratching the Body.
It was harder Plastic than I expected. If you use it strongly, you might put a scratch on it. It is. Because the tip is a little sharp, it was good for peeling off and used.
Quantity:1 Set of 4pcs., I think it is a good product with reasonable price.
View detail
Excellent tool!
It's a must have for Full Cowl's Motorcycle!
It's a Recommendation because it's easy to work with and it's scratch resistant.
View detail
Material:Plastic is more secure
I used it to strip the door interior of my car
It may be scratched if it's stripped of the Gold genus lining, but this is Material:Plastic, so it's sturdy to some extent
Material:Even though it is plastic, it is a hard material, so it has a lot of power
View detail
amon Lining Peeled Off Tool
The package arrived quickly, packaging is of excellent quality. This product is of excellent quality, ideal for removing various panels, door cards, as well as some clips in cars. The material is strong, the thickness of the handle is 8 mm. I think it will be hard to break it or damage it. I advise you to purchase for both amateurs and professionals. View detail
Easy to peel off
If you put Sticker on your own, you can remove it without using solvents It does not damage the body of the car Before use Is it hard to hold? I was expecting this, but it's not and it's not tiring at all Teeth don't chip so much either, so the product is QUANTITY:1 Set of 4pcs. but you probably won't use them all up View detail
Tool you want to keep
It is an essential part in the interior decomposition of automobiles. However, Motorcycle is also convenient when there is an emergency.
I think that the price is also relatively reasonable, so I'd like to put it in the tool box.
When you want to slightly widen the clearance of Plastic cover, something tends to do with Slotted screwdriver or something, but then it is easy to get scratched. This tool is hard to scratch. Although impossible if it is impossible.
If you use it well you can do a beautiful job.
View detail
By Motorcycle, although seldom used, it can remove finely, without also giving a crack for the Instrument panel of a car outside carrying out.There are many opportunities to remove the Instrument panel of cars, such as the Audio system and a Navigatio
By Motorcycle, although seldom used, it can remove finely, without also giving a crack for the Instrument panel of a car outside carrying out.There are many opportunities to remove the Instrument panel of cars, such as the
Audio system and a Navigation.
It is found useful very much at such time.It is No. 1 to work by
and the tool only for a beam, since the Panel might be removed by the Slotted screwdriver once [
] and the crack may have been given.
View detail
It uses for the Car instead of a Motorcycle. Although inner package outside carried out, and it did not use very but it corresponded by the Slotted screwdriver at the beginning .... Although work is possible enough, only exclusive elegance suit
It uses for the Car instead of a Motorcycle.
Although inner package outside carried out, and it did not use very but it corresponded by the Slotted screwdriver at the
beginning .... Although work is possible enough, only exclusive elegance suits too and efficiency is still considerably different.
The efficiency increase in the sense of security to which the principle of a Lever is easy-to-use, and a structural efficiency increase and a crack cannot attach a raw material easily, either, since a crack is difficult to be attached to a car body since the tip has broken.
I think that one has and it does not lose it by all means since
and price setting out also tend to take out a hand.
it is reconstruction -- even carrying out ball piece exchange, such as those who melt and are not, or a Room lamp, -- the outside of an inner package -- carrying out -- since it uses.
View detail