Reviews
Easier to grip
I used to use Emon's Air gauge, but when I put it away, I accidentally closed it without removing the Air gauge and the gauge stuck and would not return to Zero. View detail
For continuity checks
I purchased this to do a continuity check during Restore.
I usually use Tester, but with Tester I have to suppress both and my hands are full.
I have an Alligator Clip, but I bought this Inspection Tester because I thought it would help me do a lot of work.
If you clip one end to the Earth terminal, you can easily check for continuity, so it is quicker to find out what wire is what for each wiring.
The line is also long, so it is unlikely to be unreachable.
The good thing is that I have both 6V and 12V cars, so this one pc can provide both.
It is useful to have 1 pc for TroubleShoeing in Wiring.
View detail
Inspection supplies that penetrate regardless of Material
[How is it used?
The power supply when installing a USB power supply, etc., and the earth search.
Was the one you received as per Image?
The package is simple and as shown in the Image.
It is unexpected that the tip of the terminal is quite sharp, perhaps to enable inspection by sticking it into the Plain Type Terminal.
Cap is included but was missing when I noticed it and may have been somewhat loose
How was your experience with it?
Although it was not possible to measure any voltage or current, it was possible to check various points with Earth clamped in appropriate places to see where the power source was coming from.
Since Cable is about 80cm, after checking Plus and Minus, we were able to try out the fixation points with pathways and Tie Wrap as it is.
Since it can be purchased for only one coin in terms of price, it is not so regrettable in case the Cable breaks or disconnects when it is bent at a steeper angle than expected by Handlebar, for example.
After installing all the electrical components, it is no longer used for measurement, but it is increasingly used as a tool for drilling holes because of its sharp tip and Gold price, which is not too high even if it is broken.
I've penetrated quite a few polyesters and skins, and the tips still remain sharp enough to be painful to the fingertips.
[Points to note]
The tip is sharp enough to easily pierce paper, thin plastic, cloth, and skin, so it is quite painful when it pierces the hand.
How did it compare to other products?
Compared to most products, the price is much lower due to the fact that the equipment does not measure.
Where can I get power and where can I connect it to use the electrical components? I recommend this product for people like me who think that all they need is to search for the answer. On the other hand, I want to see the values of electricity that I can't see. I want to work while watching. I do not recommend this product to such a person.
View detail
Recommended if you want to DIY power supply
If you are a DIYer who installs USB power supply, electric heating equipment, etc., you should have one of these to get the job done.
It is also useful to know the +- polarity
View detail
Buy this before you buy the expensive ones.
[How is it used?
I purchased this to check the disconnected part of the Blinker harness.
Was the one you received as per Image?
As per image.
How was your experience with it?
I don't have a Meter or anything like that.
It is easy to use, and it glows red when energized.
In this case, it was just to check the power, so this was sufficient.
[Points to note]
I don't know about voltage and such.
Only check for electrical current.
How did it compare with other products?
It was cheap and I needed it urgently.
View detail
Voltage is not measured.
Used to locate power source
LED in Body emits light when voltage is present
It can be checked with one hand, so it's useful in tight spaces.
View detail
Convenient
I was looking for a simple type that I can put in my Cigarette because I don't always check the voltage.
It can be used while driving, but with Daytona's Cigarette power supply with lid, the lid that is left open shakes.
LED display is Blue. It is hard to see in daylight.
Body is smooth and sturdy.
I like that it doesn't look cheap.
View detail
Simple and easy to understand!
This time, I purchased it to check the ACC power supply from the fuse box for the installation of a car's driver's record system. The LED glows red to confirm that power is being supplied. I used it for the first time, but I had no trouble with it by referring to the instructions in the Emon site.
In other people's reviews, it seems that it is often used in Motorcycle electrical tinkering, and I would like to put it in my tool box and use it.
View detail
easy to understand
I purchased this product to replace a Flat Type Fuse Power Supply. The power detection was easy to understand and simple. View detail
Convenient!
Used to look for a power supply! I want a real Tester but a power supply for now.
Perfect for those who want to find it!
View detail
Necessities
It's a necessity to check the energized side. This time, I checked the energized side to get power from Fuse. The energized side is indicated by a red Lamp. Since you can't see the electrical connection, it is useful if you have one of these. I am satisfied with its good cost performance. View detail
Easy to use
It is very convenient for taking out the power supply and checking the Earth.
It is easy to use and can be confirmed by both color and sound, making it easy to use even for first-time users.
It is useful and safe to use when installing electrical components.
View detail
Convenient
You can check the battery status.
You can easily check it by simply inserting it into the Cigar lighter socket when Ignition is ON.
It is easy and not difficult.
View detail
Easy to use
The Inspection Tester is very useful for locating a permanent power source.
The LEDs light up for easy and safe use.
View detail
A must have for any electrical DIY!
It's a must have for finding ACC power!
How to use is also simple, and it shines Red when the power supply can be confirmed.
View detail
It is easy to use even for beginners.
This Inspection Tester is very useful to find out the permanent power supply or attachment power supply from the wiring cord of the vehicle. It is useful for USB and DriveRecorder installation. View detail
Necessities for electrical component DIY
I bought this to find ACC power.
It's a great product, very easy to use and makes me feel like I know a little more about motorcycles.
View detail
To check the vehicle's voltage status
It is not the one that can check the state of Battery directly, but it becomes a guide. It's built-in and safe to use. View detail
It's a must-have for DIY.
The Inspection Tester is very handy for removing power and checking the Earth, so you can see both color and sound. If you're installing electrical components yourself, it's very useful and safe to have it with you. View detail
Durability ×
I used it for continuity testing, but unfortunately, it was not very useful.
The LED that emits a light when the device is switched on is right where it is held in the hand, so it is extremely difficult to see in bright light, let alone in the dark.
Also the durability was no good. I didn't bump into it, but the Minus line that Clip is attached to was broken from the root.
I thought the ordinary Inspection Tester was better.
View detail