Reviews
Required around Wiring
It is used to protect Wiring couplers, etc. and to prevent them from rattling.
The adhesive strength is perfect, and it is easy to cut and use as much as needed.
It is easy to use.
Cushion is also reasonably thick, not too thick to be obtrusive.
It won't fall apart even after long use.
I think it also has some durability.
View detail
I'm going to put it between the places where it might interfere.
[How is it used?
Cushion tape is already installed on Ninja 400, but it is too thin and easy to peel off, so I replaced it with this product.
How was your experience with it?
The Frame and Seat are both scratch free.
Even if it doesn't interfere at normal time, it may collide when the suspension sinks.
[ITEMS TO BUY TOGETHER
Silicon remover
To increase the adhesive strength, degrease the surface sufficiently before attaching.
View detail
Amon tape 1777
This not bad but thing protective layer I'm using in engine bay area wire protection.fellig less stickey.this good for automobile DIY enthusiast.thanks amon View detail
Just a thread. But easy to use.
I used it to strip the Emblem from the OHLINS.
There are similar products, but this one did the job.
It is just a thread, but it can be peeled off without damaging the Body.
I love that it comes with a replacement thread too.
It was a pretty strong adhesive, but it came off cleanly when I hooked the thread in the gap and pulled it off.
I don't use this product very often, but it's safer to have.
View detail
Useful for a wide range of applications
The adhesive strength is very good and heat resistant, so it can be used effectively for both interior and exterior. It can be used to install ETC and other devices inside the car and Aeroparts on the exterior. Water resistance is also good, so it is easy to use for DoorVisor. View detail
Transparent and unobtrusive
Clear type double-sided tape is ideal for attaching the DriveRecorder Body to the front glass. [Color] Since it is clear, it is not noticeable even if you look at the surface from the outside of the front glass. Moreover, it is very strong and resistant to heat, so you don't have to worry about it falling off. View detail
To install Bikini cowl search Louver.
You can't go wrong with Emon's strongest Double-sided Tape! View detail
It can be used for many things.
The wide range of size and sufficient length makes it convenient to use in various ways, and the double-sided tape is effective for matching Rubber and Gold genus, which makes it easy to apply Weather striptease and Rubber molds. View detail
It is useful for narrow places.
The Connector is easy to unlock and easier to work with than prying with a Wiring Screwdriver. The Grip is easy to hold and effective. It is possible to use it to hook the Gasket which stuck and to remove it, and there are various usages. View detail
It is easy to Cut.
You can easily cut the tape by hand even if your hands are not free for work and it is difficult to use Scissors. The tape is easy to use because it does not get sticky due to heat. View detail
Emon is really Emon!
I used to use some stuff made by Straight, but this tape doesn't stretch and doesn't peel. View detail
Necessities for Wiring
We basically use Tester, Bullet Terminal, Electric Works Pliers and this is all we need for wiring, we don't bother with Coupler or Harness, the waterproofing and protection is great. I don't bother with Couplers or Harnesses, the waterproofing and protection is great, and the adhesive strength is strong enough to hold the wiring in place with a Tie Wrap. View detail
It's super powerful.
This double-sided tape is very strong and sticky, it's very convenient for Aeroparts installation and it's easy to use when you need to install or repair your Aeroparts. The tape is very strong and sticky. View detail
It is very durable.
Thin, yet strong and easy to use hand-held non-woven tape, useful for tying and protecting Harness, less sticky, but still sticky and heat and strength resistant for use in the engine room. View detail
You can polish it well.
The Grip brushes are easy to hold and can be used to clean the battery terminal with the Brass Brush to prevent problems such as poor contact between the battery terminal and the terminals and trouble. View detail
It is also resistant to heat.
I needed Double-sided Tape to reuse the ETC Body, but the ordinary commercially available ones peeled off many times on hot days due to the temperature in the car. I found this product when I was looking for a strong one, but it did not come off even once after I reapplied. The adhesive strength sticks to the car even in hot places and I would recommend it. View detail
The quality is different from Vinyl Tape.
It is not easy to stretch even if you pull it, and it can be cut easily by hand. The stickiness is not sticky in spite of its firmness, and it is easy to peel off even if it becomes old and convenient for binding Wiring. View detail
Do-it-yourself Battery replacement is useful if you have one.
This is a good product to use if you want to replace the battery by yourself. The quality of the product itself is in its own way, but the effect is Large satisfaction. View detail
Powerful.
The adhesion strength of Double-sided Tape is strong and can be immediately installed anywhere though it is thin. It seems to be strong also to heat, and heat resistance also seems to be high though I use it in the room of midsummer. View detail
It peels cleanly.
You can remove the emblem without attaching the wound to the body. It is not impossible to remove the emblem by hand, but you can always stick the corner of the emblem to the body and get the Wound on the body, so this is a simple tool for you to recommend. View detail