Reviews
Service Reminder Reset for New Model GSX1300R HAYABUSA
[How is it used?
Recently, many manufacturers have adopted a system in which the Lamp on the Meter lights up when it is time for maintenance.
Various foreign car manufacturers, especially Ducati, are doing this.
But recently, domestic cars are also becoming like that:you have to drop Gold to the Dealer to get rid of the Lamp. Is this part of the Dealer's business strategy? So, even for a simple oil change, if you don't go to the Dealer to have it done, the maintenance Lamp is still glowing all the time.
is Japanese pampas grass, a simple homemade one is all that is needed to solve the problem.
Was the one you received as per Image?
As per Image
It's better to buy it with other things. Since it's only about $100 anyway, the actual store is a better deal when shipping is included.
How was your experience with it?
Effective.
[Points to note]
You have to insert it deep to get it to work.
How did it compare to other products?
Nothing in particular to compare.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
In doing the work, this method is probably a maintenance procedure that is not covered under warranty.
If you want to be stingy with your Gold, please use it only as a reference.
If you are a little worried about the work, you should still buy the OEMReset switch.
OEM reminder Reset switch
09930-83130 Available at Webike, but currently out of stock?
By the way, in most cases, they fail.
It will not respond unless it is inserted firmly and deeply.
Then press and hold the LeftSelectSwitch▼Button to open MENU, select SERVICE, MODESwitch to determine RESET, which is not usually displayed, select Yes when Yes/No appears, and then you can set it individually!
View detail
Used to extend BlinkerWiring
Used to extend the Right Side wiring as it was too short when replacing the Rear blinker.
Naturally, we were able to extend it without difficulty.
View detail
My savior who mistakenly cut off CUB's Wiring
I bought it because I had mistakenly shibered CUB's RegulatorWiring.
The shape is exactly the same as the Coupler of the C50OEMRegulator.
However, please note that the OEM is like a double cord, so the attached terminals cannot be used.
View detail
Motorcycle Wiring Essentials
This is a must-have item when placing a Relay on the Seat and extending the wiring from under the tank, through the Engine sturdy, to the Handlebar on the Front. It protects the wiring from rain and heat and prevents unnecessary troubles. View detail
Wiring as usual
[How is it used?
I had been using it for wiring work and bought it at Home centeretc. when I noticed it, but I ran out and had plans to shop at Webike, so I bought it along with the other products.
Fine wire 0.5sq is used for those with low power consumption, while Others basically use this 0.75sq.
[Was the product you received as Image?
It was just like the picture.
I always use the safe Black Wiring.
How was your experience with it?
This is a standard Wiring Cord, so the product is solid.
Emon's Wiring Cord allows you to hook up excess wire with the Holder, so you don't have to worry about it being RoseRose the next time you use it.
【Review】
It is inexpensive, readily available, and of consistent quality.
It is also convenient to keep Wiring together.
I always use Emon's Wiring because it has no problems with heat resistance, oil resistance, etc. for use on motorcycles.
View detail
Before running short on the way to the car parts store!
I had it in a 20-pack, but I started working on it, ran out halfway through, and had to run to the car parts store.
They are not expensive, so I should have bought a 100-pack from the beginning, considering that I would have lost efficiency if I ran out halfway through the process.
View detail
Unwavering Reliability & Quality 2
Unwavering Reliability & Quality 2
Easy-to-use Point with a hole in the take-up table after use.
I know there are other products that are probably used by PRO electricians.
This is a great product for amateurs to use for DIY!
View detail
Unwavering Reliability1
Unwavering Reliability & Quality
Easy-to-use Point with a hole in the take-up table after use.
I know there are other products that are probably used by PRO electricians.
This is a great product for amateurs to use for DIY!
View detail
Wiring Protection
Purchased to protect AntennasCable for ETC, though it was a challenge to get it through the Wiring Tube,
Once we got it through, it was ours, and Wiring was a breeze.
It also protects the Cable, so it kills two birds with one stone.
View detail
Cost-effective and time-saving
Used to extract DC power from XR100.
The items used were AC-DC converters, Relay, rectifying Diode, and EDLCSUPER capacitors.
The intended use is Electric Type Meter and USB and Portable navigator power supply.
I took a countermeasure because when Portable navigator is half-wave rectified, it often does not turn on at startup.
There are many rectification diodes available, but we chose this one because of its reliability and the cost of taking out and producing it, considering the time and effort required to make it.
It would be sufficient to use a battery type, but we want to make it maintenance-free, so this is what we have done.
Half-wave rectification DC extraction of RegulatorRectifier has been installed in advance.
View detail
Reliability used to date
Used to extract DC power from XR100.
The items used were AC-DC converters, Relay, rectifying Diode, and EDLCSUPER capacitors.
The intended use is Electric Type Meter and USB and Portable navigator power supply.
I took a countermeasure because when Portable navigator is half-wave rectified, it often does not turn on at startup.
There are many inexpensive Relay products available, but we chose the smallest and most reliable one we have ever used.
It would be sufficient to use a battery type, but we want to make it maintenance-free, so this is what we have done.
Half-wave rectification DC extraction of RegulatorRectifier has been installed in advance.
View detail
For Wiring Processing
This is essential for Wiring processing.
They are inexpensive and come in a variety of colors, making them very useful.
View detail
To the added Wiring process
We fix Wiring for Motorcycle as well as Garage, etc.
Wiring is used separately from Tie Band to avoid clutter.
View detail
For Wiring work
Wiring was used for protection after extension with solder.
A heat gun is recommended, as burning with a lighter may cause scorching.
View detail
Toys for your free time
Hazard & to be easily visible at night View detail
Cheap, safe and easy to use
[How is it used?
When I was working to install YOSHIMURA/Oil Temperature Meter on XJR400R, the attachment wiring was too short to reach DAYTONA/D-UNIT under the seat, so I used this product to extend the wiring and installed it successfully. I extended the wiring with this product and was able to install it successfully.
How was your experience with it?
Very easy to use
AVS 0.50sq is often used for electrical components in motorcycles, so those who often tinker with electrical systems should have one in their tool box.
How did it compare to other products?
Basically, we only purchase electrical components from Emon, but you can easily find them at Home center or other places. However, it is much cheaper to buy on the webike.
[Points to note]
Nothing in particular, but it is safer to use dedicated tools for crimping and crimping firmly to avoid trouble.
View detail
For electric heating Wiring
It was used for Wiring for electric heat.
I had originally been using an electric heating wiring system, but I was concerned that the current was flowing even when the key was off, so I installed this system.
It is Emon nature and it is safe.
View detail
Essential Items for playing with electrical systems
It is a must for DIY of car electrical system.
I used to put together Wiring with Tie Band only, but it ended up messy and dirty.
It is an inexpensive product and we encourage you to use it.
View detail
It can be used for everything!
Wiring summary of the Security Camera installed in my home, Wiring summary around my phone, and
Wiring Summary for Bicycle, Motorcycle and Car… Use for Anything! And the price!
It's affordable and easy to cut with Scissors, so it's a Recommendation for everyone!
View detail
Required to convert CUB and CD50 to BlinkerLED!
[How is it used?
When I purchased and installed LED bulbs and Relay to convert Blinker to LED, it turned out to be in a state like Hazard, and when I investigated the cause, I found that it would not light properly unless I interrupted the Wiring of the Pilot lamp with this rectification diode.
Was the one you received as per Image?
Two Wiring with nicely coated Diode were in the box.
Was the installation difficult?
First of all, electric pliers and terminals must be mounted as part of the Wiring process.
Next, it is necessary to interrupt Wiring to the Indicator Lamp.
How was your experience with it?
It now lights up correctly!
[Included Parts:were they on?
There is nothing, but the direction of current flow is indicated on the box.
[Was there anything that disappointed you?
Not at all.
If you have ▼BlinkerBuzzer attached, you will need this Wiring separately.
View detail