Reviews
It's not always sold in the Home center, so you can have it as a spare.
Used for 6PCoupler of MONKEY-based Engine.
Some Engines are processed and cut, so this is essential in such cases.
View detail
Very easy to secure power supply
[How is it used?
In order to add electrical components, we decided to take power from Fuse, which is energized in conjunction with Ignition key.
Was the one you received as per Image?
It was exactly as it looked in the picture; it was hard to tell what the Wiring looked like coming out of the FuseBody, so that was a bit of a concern.
Was the installation difficult?
The installation itself is easy since it is just a matter of replacing the existing Ignition20AmpereFuse, but some ingenuity is required since the wiring must be routed around the FuseBOX lid so that it can be closed. Since the wiring is coming out of the FuseBody in an upward direction, in order to make it turn 180 degrees, I had to cut off a part of the pate that was heaped up to reinforce the root of the wiring attachment part, so that the wiring could turn 180 degrees without any difficulty. The following modifications have been made to allow UTurn.
How was your experience with it?
It was energized with Ignition keyOn without any problems.
[Included Parts:were they on?
There is a 10Ampere Fuse tube in the middle of the wiring. This time, it was used as it is.
[Was there anything that disappointed you?
Not particularly
View detail
The size was larger than I expected.
I'm using a Type 3 Grom for PositionWiring of a Koso sequential blinker with Position. I had a problem with the above blinker. So I used it. For more details, please refer to the Blinker Impressions above. No problem with normal rectification. If you use the Alligator Clip to reverse the test before connecting, the Blinker will not light up, so the quality must be Large and strong. View detail
there's one in the family
I bought this for the Wiring process of my home Motorcycle.
Bullet Type Terminal etc. can be different in size depending on the manufacturer, so I buy them each time.:If you have a Set, you can do Wiring processing.
I have used it for a variety of purposes, including installing a Sub computer, Oil Temperature Meter, Water Temperature Gauge, and Other Brand Product's Blinker, and I have no complaints.
It can handle a wide variety of wires, from very thin wires to thick wires.
When I crimped the Bullet Terminal, there were times when it stuck to the Electric Works Pliers side, but it came off easily when I applied a thin layer of oil to it.
Some people often use Electro Taps, but they tend to cause poor contact, so the Bullet Terminal process is more reliable.
In particular, since the effect of vibration on the motorcycle is large, the Electro Tap, which is heavier, pulls on the wiring and makes it easier to break the wire.
I use bullet terminals for all the connections that cannot be couplt-on, because they are capped for waterproofing and easy to remove.
View detail
A good one to have for wiring.
I bought this to pull the USB power supply from my PCX150's ServiceCoupler.
This is useful for wiring around the front of a scooter.
It is also inexpensive, so I think it is a good thing to have.
View detail
Switch expansion for Motorcycle
I used it to add a fog lamp to my motorcycle. In the event that you have any questions regarding where and the best way to get in touch with us, we are here to help. It's a great way to keep your hands clean and dry. The switch itself has a TAB, receptacle terminal at the end of the wiring and is a Type that plugs in. View detail
A thickness that is often used
0.The 75sp is a thick wire that is often used when doing electrical work on motorcycles and cars, but until recently I had been reusing the harness from an old car navigation system. Because a considerable length remained, I have used it for various things, but I came to purchase it because the stock finally ran out, and I chose Black and Blue for some reason because I had many opportunities to use it for Minus.
This time I made a Wiring with Coupler to attach the Blinker relay to the car body, I used about 15cm of it and it has 5Meter so it looks like I won't need to buy it for some time to come. This kind of item can be bought in just the right quantity, and there are more opportunities to choose Emon, which can be used with confidence in terms of quality. Of course, after all, a new one is soft and easy to handle unlike a used one.
View detail
Amon 1806 blue . good one
Agin this time with amon mini blue led.outer good appearance and with little long cable. LED very small and more bright. Led low power consumption. Satisfied with product. Thanks Amon. View detail
Switch with illumination
This is switch with illumination.led is white colour.cable little hard but ok.recomended for how like DIY projects.thaks amon. View detail
Amon relay it's good
This is 12 volt relay. This time I am using in controlin on/off the subwoofer in car. I am worry about electronic switching power supply keep it standby. Because of that avoiding the drain power using this relay.load 12v/8A continue.no more heat . there is no flyback diode.it came with bullet connector. View detail
Battery output terminal amon 8859
I just using in while connecting under seat subwoofer direct power from battery + in car battery.All the things including bolt too.Thikness of plate also good.In my situation im happy of this product.thanks View detail
Amon terminal set . useful
It's really helpful what are the basic item need for specially who doing DIY projects in automobile.Items quality good and along with tidy box . reconditioned . Thank you. View detail
Amon led 2715 super quality
This is my 2nd order .this time I'm using this light for car rear door light illumination at night while open door.This is less power and more bright .Super quality and genuine fitting.even water proof.amon product highly recommended and super customer service webike.Thank you View detail
Amon2857
Led dimming unit.product small long with double sided tape. Very easy and outlook appearance superb. Another big thing is while using it has memory function no need to worry about the last settings.highly Recommended product for DIY car/bike enthusiast. Thanks Amon View detail
Amon Male female character connector
Super quality and good price .even can use 0.5-2mm cables without braking crimping mouth.iron material also strong.highly recommended.thaks View detail
LED.
It's a must-have when using LEDs. View detail
Amon 2715 led
Super quality and Low power consumption.out look super genuine quality.. Installation in box inside along with amon magent switch.. I'm really happy about amon products. Highly recommended. View detail
Power extraction without damaging the vehicle body Harness
It is an item that can get a branch power supply by replacing it with Fuse.
When it comes to taking power out of your car or motorcycle, you may be more likely to Image an Electra tap.
It's certainly useful and widespread, and if you ask a motorcycle shop to install electrical equipment, they will often use an Electra tap.
However, as you can see from the structure, they are not only damaging to the harness on the car body, but they are also unreliable and often become a source of trouble over time.
In this case, this product can be used by replacing the Fuse, so it will not damage the harness on the car body.
By the way, personally, it is iron board to replace this with HeadlightFuse and use it as a power supply for Bach direct Relay.
I've been running it this way for years on multiple Motorcycles and have never had a Trouble.
It's one of the most reliable power extraction methods.
View detail
For Power Distribution Wiring
It is a purchase together with Connector to do Wiring for power distribution.
I didn't need that much length, but I had no choice.
It was also sold in the nearby Shop, but the price was a little higher here, so it was a hassle to buy it together.
View detail
For Wiring
I bought this with the Connector for Wiring distribution.
I didn't need that much length, but I had no choice.
Wiring is a purchase of Red to identify.
It was also sold in the nearby Shop, but the price was a little higher here, so it was a hassle to buy it together.
View detail