Reviews
Very inexpensive.
I would like to install a new Grip heater, but I would like to calculate if the heater is Large enough to interrupt the wiring between the USB port and the Relay. The maximum charge current of the two electrical components is 3.3A at 13.5V for the Grip heater and 4.8A at 5V for the USB2 Port (5V is switched on and off), totaling 8.1A. I bought Emon's AV1.25sq. The available power is 140W or less for 12V cars and 280W or less for 24V cars. If converted to allowable current, it is about 11.6A? Although it is within the allowable range, it is not as high as DAYTONA's AVS1.25 (A) of the same size.:Auto for Vehicle Low Voltage Power Line, V:Vinyl、S:The price is 1/8th of DAYTONA in unit length, and Emon is very cheap. By the way, it is another Wiring, but the most large current of ETC on-board unit seems to be less than 1A because it is 1AFuse, although only standby current was written. View detail
Wiring as usual
[How is it used?
I had been using it for wiring work and bought it at Home centeretc. when I noticed it, but I ran out and had plans to shop at Webike, so I bought it along with the other products.
Fine wire 0.5sq is used for those with low power consumption, while Others basically use this 0.75sq.
[Was the product you received as Image?
It was just like the picture.
I always use the safe Black Wiring.
How was your experience with it?
This is a standard Wiring Cord, so the product is solid.
Emon's Wiring Cord allows you to hook up excess wire with the Holder, so you don't have to worry about it being RoseRose the next time you use it.
【Review】
It is inexpensive, readily available, and of consistent quality.
It is also convenient to keep Wiring together.
I always use Emon's Wiring because it has no problems with heat resistance, oil resistance, etc. for use on motorcycles.
View detail
Before running short on the way to the car parts store!
I had it in a 20-pack, but I started working on it, ran out halfway through, and had to run to the car parts store.
They are not expensive, so I should have bought a 100-pack from the beginning, considering that I would have lost efficiency if I ran out halfway through the process.
View detail
Unwavering Reliability & Quality 2
Unwavering Reliability & Quality 2
Easy-to-use Point with a hole in the take-up table after use.
I know there are other products that are probably used by PRO electricians.
This is a great product for amateurs to use for DIY!
View detail
Unwavering Reliability1
Unwavering Reliability & Quality
Easy-to-use Point with a hole in the take-up table after use.
I know there are other products that are probably used by PRO electricians.
This is a great product for amateurs to use for DIY!
View detail
Wiring Protection
Purchased to protect AntennasCable for ETC, though it was a challenge to get it through the Wiring Tube,
Once we got it through, it was ours, and Wiring was a breeze.
It also protects the Cable, so it kills two birds with one stone.
View detail
For easy power pickup
Used to get power for drareco
Easy power supply from Fuse box
However, the Wiring is caught on the Cover, so a little modification is required.
View detail
Cost-effective and time-saving
Used to extract DC power from XR100.
The items used were AC-DC converters, Relay, rectifying Diode, and EDLCSUPER capacitors.
The intended use is Electric Type Meter and USB and Portable navigator power supply.
I took a countermeasure because when Portable navigator is half-wave rectified, it often does not turn on at startup.
There are many rectification diodes available, but we chose this one because of its reliability and the cost of taking out and producing it, considering the time and effort required to make it.
It would be sufficient to use a battery type, but we want to make it maintenance-free, so this is what we have done.
Half-wave rectification DC extraction of RegulatorRectifier has been installed in advance.
View detail
Reliability used to date
Used to extract DC power from XR100.
The items used were AC-DC converters, Relay, rectifying Diode, and EDLCSUPER capacitors.
The intended use is Electric Type Meter and USB and Portable navigator power supply.
I took a countermeasure because when Portable navigator is half-wave rectified, it often does not turn on at startup.
There are many inexpensive Relay products available, but we chose the smallest and most reliable one we have ever used.
It would be sufficient to use a battery type, but we want to make it maintenance-free, so this is what we have done.
Half-wave rectification DC extraction of RegulatorRectifier has been installed in advance.
View detail
You can make it yourself, but buy peace of mind.
Useful for DIY of electrical components
Frankly, I could easily make something similar myself.
I use ready-made products because they are somehow safer.
View detail
For Wiring Processing
This is essential for Wiring processing.
They are inexpensive and come in a variety of colors, making them very useful.
View detail
To the added Wiring process
We fix Wiring for Motorcycle as well as Garage, etc.
Wiring is used separately from Tie Band to avoid clutter.
View detail
For Wiring work
Wiring was used for protection after extension with solder.
A heat gun is recommended, as burning with a lighter may cause scorching.
View detail
SwitchBody's tucking & hiding of Wiring is messy.
I've added a Headlight to the Basket of the CUB, as well as a PRO.
Purchased along with Torg Switch, also from Emon, for switching between high and low.
Perhaps it's not so much precision despite the dedicated product, or perhaps it's
SwitchBody's tucking & hiding of Wiring is messy.
Above all, Plastic's Cover.
The fact that it doesn't fit tightly & comes off easily is something I would like to see improved.
View detail
For Wiring processing, this is the one!
[How is it used?
I purchased this Tool set for Wiring process for Blinker and License Plate Light.
Was the one you received as per Image?
I lost my old one so I bought it again and it is almost identical, just like the Image.
How was your experience with it?
I don't know about the Included Parts:I didn't use any of them, but the Electric Works Pliers worked well. The ones I have at home are old Electric Works Pliers and I couldn't get a tight fit, but with this product, I could easily modify them and make them stress-free. I am glad I bought it. I think the cost performance is also very good.
[Points to note]
Nothing in particular. It works fine and I recommend it.
How did it compare to other products?
I compared it to the old Type Electric Works Pliers, but I really liked the fact that it could be clamped tightly and that it was not slow moving. The old type had a different shape for the clamping point, and was hard to open when tightened.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
For Wiring Summary
This is essential where Wiring can be put together or rubbed.
I guess it just can't help but get cracked in a few years when exposed to UV rays.
It is good that it can be installed after Wiring.
View detail
Toys for your free time
Hazard & to be easily visible at night View detail
I can make it myself.
Purchased to branch power from existing Bullet Terminal.
You can make it yourself if you want, but since it is a power supply, you need to use something like this in case of emergency.
One drawback is that the Wiring color is Black.
Since it is Body ground, it is basically Plus where these things are needed.
I wrapped Red Vinyl Tape around the Wiring.
View detail
It's got hair in it, and the claws are straight Type.
There was a hair in the inner bag. It's not food or anything, so I don't mind, but it's a little weird.
The claws of the crimping part (Large type) were straight.
I was expecting Emon to have claws that were rounded inward and easy to crimp. I would have preferred to buy a Rose at the local hardware store.
It's free at the Point, though.
View detail
I haven't seen needle GoldHanger lately.
I purchased this product (adjusting for shipping costs) for the installation of a car's driver's recorder.
In the past, we have extended the needle GoldHanger and used it as a substitute when passing through Wiring for installation of Motorcycle's driver's record, etc. Recently, however, the needle GoldHanger itself is not seen very often.
This is convenient for playing with electrical equipment because it is properly insulated and can be easily passed through tight spaces by passing the Wiring through the Wire loop. The needle is not as hard as GoldHanger and is easy to use. It is not expensive and should be kept in your tool box.
View detail