Reviews
For ServiceReset
Recent SEA BASS cars have a sign in the meter reminding the driver to change the oil.
I thought the only way to erase it was to have it reset at the shop, but it was easy even for an individual.
The connector hole was too small and the needle gold was too thick to fit in the connector, so I used Emon terminals.
OEMs sell specialized products, but they are expensive, so this was sufficient.
View detail
Emon Terminal cover
The cover is quite large for a terminal cover for motorcycles, and if it is for a large type of car, I would have liked to see a description to that effect. View detail
For Wiring processing
Purchased for Wiring process. No problem. View detail
For Wiring processing
Purchased for use in Wiring process. No problem. View detail
It was easy to use.
I purchased this product to use as a power switch for my car navigation system, and although it is not waterproof, it has performed its function with no problems caused by a little rain.
However, during a recent touring trip on a mountain pass with somewhat rough pavement, a malfunction occurred that appeared to be caused by vibration, resulting in a situation where the power was turned off and on, and Navigation temporarily stopped functioning after repeated startups.
Since this symptom did not occur during normal city driving or on roads with good pavement, even on mountain passes, we believe that this event was caused by severe vibration due to rough pavement. We believe that the problem is not a defect in this product, but rather that this type of switch is not good with severe vibrations, and that the cause of the problem this time was severe vibrations that exceeded the manufacturer's expectations.
I am thinking of replacing the navigation switch with a toggle switch that is in stock and see how it goes. I am thinking of replacing the Navigation switch with a Toggle switch that is in stock and see how it goes.
It's a shame because it felt good to use, but I think I will keep this Switch until I can find somewhere where I can use it.
View detail
It's safe to use
We have just purchased Male and Female at the same time, as the stock of Bullet Terminal was running low, in order to review the Wiring of the Motorcycle's retrofit electrical components.
I try to stockpile these frequently-used materials in large quantities because I don't like to be interrupted when I run out of materials during a job.
Some of the No Brand products were shoddy, but I can buy Emon products with confidence. There were no defective products this time either.
View detail
Emon for peace of mind
I bought it because I want to stop Bullet TerminalWiring for good.
Various Wiring teasers are Quantity:It might be better to buy a Set, but I think buying Rose is a better deal at the moment because you end up with a surplus.
View detail
For power supply branching
I used this one because I thought it was easier to use than making my own, and there were no crimping or missing parts.
Since it is a ready-made product, it is not possible to make subtle length adjustments, but it is well made.
View detail
Replace with new Connector
The Coupler I was using was discolored and hard to remove, so I purchased a new one to replace it.
Male, MeSpin, and Coupler set items were inexpensive and saved me a lot of money.
View detail
Refreshingly summarized
I purchased this for use with a Switch on a Cycle alarm that gets its power directly from the Battery. The reason why I needed to install the Switch is that I do not use the Alarm when I leave it at home, so I could not accidentally operate the Quantity:We decided to install a switch just in case it is set to run while we are away from home, or to prevent the battery from going up because of it. I don't think it will malfunction if I don't operate it in a strange way, but just in case.
Cycle alarm is intended to be used when leaving the vehicle for touring, shopping, etc., so we plan to install a Switch in the Space under the Seat and use it to turn the Switch on when departing if Cycle alarm use is expected.
Initially, we had installed our own Torg Switch, but it did not fit into the Space under the Seat, so we purchased this Torg Switch to replace it.
I am satisfied that it fits tightly, but I think it is a bit expensive.
View detail
Connector Replacement
The MotorConnector installed is old and discolored, so we are purchasing a new one for replacement.
The TAB, receptaclePin, and Connector set was reasonably priced, but I was able to exchange it for a new one.
View detail
SwitchBody's tucking & hiding of Wiring is messy.
I've added a Headlight to the Basket of the CUB, as well as a PRO.
Purchased along with Torg Switch, also from Emon, for switching between high and low.
Perhaps it's not so much precision despite the dedicated product, or perhaps it's
SwitchBody's tucking & hiding of Wiring is messy.
Above all, Plastic's Cover.
The fact that it doesn't fit tightly & comes off easily is something I would like to see improved.
View detail
For Wiring Summary
This is essential where Wiring can be put together or rubbed.
I guess it just can't help but get cracked in a few years when exposed to UV rays.
It is good that it can be installed after Wiring.
View detail
Two fine Wiring will fit.
This size will fit one standard wiring. Two wings will just barely protrude.
On the other hand, it is ideal when you want to hide just one.
View detail
Used to process Kill switch.
Emon's Coupler can be purchased with confidence because of the accuracy of the terminals included in the package to a certain degree.
If the terminals are shoddy, there is nothing I can do about it, so I try to choose something decent and quick to use rather than buying the cheapest one I can find.
View detail
RedBlackIt is useful to have.
Wiring in Emon.
We use it for basically everything.
For Motorcycle, I used it to pull Wiring for ETC.
1.25sq" refers to the thickness, which is the same size as the Wiring used for Air guns (Electric Gun).
If you just want to play with Motorcycle normally, you will use the existing Wiring, so you will not use it much.
However, it is very useful to have this kind of toolbox for electrical tools in the rare cases when you want to use a small amount, such as additional Wiring or Wiring branching.
It is convenient to have one of each along with the Red color.
It is also good that it is easily available at home centers, auto for vehicle supply stores, and Motorcycle supply stores in case of a sudden need.
In my case, I have a lot of opportunities to use it in some way, such as creating additional Wiring for playing around with cars or using it in electronics work.
View detail
It's a safe and reliable product.
We are using DAYTONA's Power Supply Unit to obtain power for DriveRecorder and Grip heater, etc. When connecting this unit to Battery, we are installing it upstream of the unit.
I am not sure if it is necessary to install it, but I am incorporating it just in case.
I have been using Emon's products for motorcycle and car tinkering for a long time and I trust them.
View detail
With fender-less-izing of a motorcycle, since a reflector was needed, it purchased. He bought this product that is regarded as it attaching to a number plate since a good attachment part was not found in the body of a motorcycle, and can be small divi
With fender-less-izing of a motorcycle, since a reflector was needed, it purchased.
He bought this product that is regarded as it attaching to a number plate since a good attachment part was not found in the body of a motorcycle, and can be small divided into six.
Although 1 cmx5? of the divided parts was small, the space to stick was not located at the place as for which the number plate was vacant.
Therefore, he plans to create and attach the pedestal for sticking a reflector to a number plate by his original work.
View detail
The cable of 0.75sq purchased to an electric spectaculars and electric reconstruction. Although the line of 0.5sq is sufficient as a matter of fact, I would like to use here in Black's single and the scene where capacity is larger. It is in the st
The cable of 0.75sq purchased to an electric spectaculars and electric reconstruction.
Although the line of 0.5sq is sufficient as a matter of fact, I would like to use here in Black's single and the scene where capacity is larger.
It is in the state which is still waiting for that time now.
The 5-m size which can be used with a sufficient degree is good exactly.
View detail
When a blinker is changed for an external article, it purchases in order to relieve attachment and detachment of wiring which had become plug connection. Case 1 formula and the terminal + reserve are contained.
When a blinker is changed for an external article, it purchases in order to relieve attachment and detachment of wiring which had become plug connection.
Case 1 formula and the terminal + reserve are contained.
View detail