Reviews
Better looking than expected!
At first I didn't think I needed it, but as I replaced the front and rear Fender, Side cover, Screen, and Mirror with Magical's Carbon parts, I got around to it.
There is no comparison to OEM Product and the look is better than expected.
The OEM Product is naturally bonded with a strong double-sided tape, so it was a little strange to remove the tape, but the positioning was done cleanly in one shot, and I think it was worth the high price I paid.
View detail
MagicalRacing rear fender
Rear area is no longer dirty.
It looks good in Carbon.
View detail
Best for DOING
It came in surprisingly quickly.
Originally, it was a MODEL with few custom parts, and Screen had two choices:Puig, which was attached before, and this one. (There are others, but they are Parenthesis bad.)
As expected of a Magical product, the texture is perfect.
It also looks more fearless, standing lower than any other product.
The holes were slightly misaligned, so they were carefully tightened.
If I wanted, it would be 100% if it were a little shorter since I don't have a windshield effect on the plane anyway.
View detail
Can be installed on 2021 models
[Usage]
I purchased this product because I was dissatisfied with the quality of the OEM Front Fender of the SC80.
[Is what you received as Image?
As shown in the image, Twill Weave Carbon has a glossy and luxurious look.
Manufacturer has not confirmed that the 2021 SC80 is compatible with the 2021 SC80.
The OEM Fender part number is the same as the 2019 model so I have no hesitation in purchasing it.
Was it difficult to install?
We were able to install it on the 2021 without any problems.
BrakeCaliper and Tireetc. must be removed for installation.
I would have asked Shop to help me with this because it is an important part to attach and remove.
I installed the parts by myself because I was told that Manufacturer could not do the installation work for the parts which were not confirmed to be compatible.
Torque wrench is absolutely necessary.
If you have the tools and care for the Brake relationship, the work is relatively easy.
[Try it?
I am very happy with the OEM and the look of the product has changed so much.
Included Parts:?
The brake hose clamp is securely attached and each hole is accurately made.
Bolt nut included is Quantity:Pair (for Left and Right) Replace with OEM one location at a time.
RubberCushion will be diverted from OEM.
Instruction Manual is included, but the product is Large sturdy even without it.
If you are a 2021 Owner and are not confident in your ability to work on it, you should not purchase it.
View detail
Missing items as usual
I ordered it almost as soon as it went on sale, but it was automatically cancelled due to a missing Manufacturer.
As usual, I would like to have more detailed information like delivery date, if you are able to contact the Manufacturer, instead of trying to order again after 3 months or so.
View detail
A definite must-have!
It is a comforting Screen, but the precision of workmanship and thickness are perfect. View detail
Rear Fender
It is longer in the back than the OEM Rear Fender to prevent dirt around the Rear suspension.
It's carbon, so it looks good.
It is also well made.
View detail
Fits: BMW K1200RS, HONDA CBR1100XX SUPERBLACKBIRD, KAWASAKI ZRX1200S, KAWASAKI GPZ900R, YAMAHA TMAX500, BMW F650GS, BMW F650GD, Others
Moving parts.
GPZ900R with Super long I installed it with the Bracket. The view is not as good as the later Mirror, but it is better than the earlier Mirror. The middle Elbow had to be fixed once the position was decided. I thought this part could be movable, but unfortunately, it was not. Also, I changed the screw from a regular silver Hexa to a black-dyed Stainless Steel Button Screw. View detail
Yoshimura cyclone volume and Under Cowl are now good.
Yoshimura cyclonesq and Exhaust System catalysts (Lunch box) I was concerned about the balance with the lunch box, and thought it might be resolved by adding the Under Cowl. I thought it might be solved by adding Under Cowl. At first, I used Carbon (Plain weave) Next (twill) I had ordered FRPBlack, but the delivery date for both had been extended and I had cancelled the order, but suddenly FRPBlack showed up in stock, so I ordered it without hesitation.
It took some time to paint with BlackMetallic, but installation was very easy.
As you can see in the photo, the balance of the entire system, including the exhaust system, has been improved and I am satisfied.
Also, even if it is not Carbon, I am satisfied with the texture if it is painted.
View detail
Can be installed on JC61 (first generation Grom) with some modifications.
Purchased on the premise of modification because there is no tank end that fits JC61 (first generation Grom).
I removed all the Sponge from the Normal seat and Screwed it to the Seat.
The gap between the Tank Cover and the
I was able to install it without any problem by filling in the floating parts with urethane sponge.
View detail
On the butt Hold.
[How is it used?
Used on a YZF-R25 with Saitaniya's Full Cowl for Race.
Was the one you received as per Image?
It was exactly as shown in the Image. I was torn between 20mm and 10mm thickness, but 10mm was the right choice!
Also, since the elasticity of Sponge is quite high, processing with Cutter may be a little difficult.
Roughly cut with Scissors, and then trim the corners with File for a clean finish.
Was the installation difficult?
It's that simple. Simply degrease the surface to which it is to be affixed and stick it on.
How was your experience with it?
With my body, YZF-R25 is a little tight, and my buttocks hit the Seat Cowl when I get down in Straight, etc....
If it is not attached, there is still no sense of Hold and it gives Damage to Cowl.
Therefore, by installing Seat end, this problem was solved.
[Included Parts:were they on?
Nothing.
[Was there anything that disappointed you?
None in particular. The adhesive is very strong, so once it sticks, you should assume that it is impossible to fix.
Make a pattern on a cardboard or print paper, and cut the paper accordingly.
You can also use masking tape or similar to mark the surface in six places before attaching.
I think there will be few failures. Please note that if you try to forcibly peel off the paint, it will take away the entire coating.
View detail
Satisfied with both design and texture
I am satisfied with both the design and the texture.
It is pricey, but very satisfying.
View detail
Great texture and Style!
[How is it used?
The design is excellent.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy
How was your experience with it?
Might be a little hard to see in the back.
[Included Parts:were they on?
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Circuit in Summer
I put it on to make safe turns on the first corner of FSW as it is going to be hot from now on. The effect will be seen from now on. View detail
weight shift
I put it on because I am not good at transferring the load to the rear wheel as I fall forward in Breaking.
Less sitting back.
View detail
Magical Racing Magical racing delivery time is frustrating
I'm happy with it because it's intended for Circuit use, but as the Title says. "Deadlines will come anytime in a few months.
Both Manufacture and the sales company were angry because they were not thinking clearly about the delivery date. Now, another Parts is also Already ordered with an estimated ship date of 2/22/2022. But..
Not arrived as of 3/6/2022.
And the distributor's response. Please wait for delivery. Only.
Manufacturer's direct version is faster.
View detail
This is...
About 12 more months of waiting! (LOL)
Magical Racing CaliperCooling duct
Bolt1 pc for the fastening bracket and Tie Band for the rest. (Tie Wrap) And there is a bit of uncertainty....
View detail
That's so cool!
[How is it used?
I've wanted an Under Cowl for a long time, and I took the plunge and bought one! I knew it would be inconvenient for my use, but I wanted it anyway, so I didn't care.
Was the one you received as per Image?
As per Image, the packaging was well done and the quality was decent. I was surprised that it took a little over a month to receive the product, although I was originally told that the delivery time would be 4 months.
Was the installation difficult?
I had to do a little work, but I bought it knowing it was not compatible, so if it was, it would be very easy to put on.
How was your experience with it?
Inconvenient!
[Included Parts:were they on?
Included Parts:were all firmly attached!
[Was there anything that disappointed you?
Nothing in particular, Magical racing things are good indeed.
Other items that would be helpful
If you use some Tie Wrap, you can install the Point of Installation or hang 2016 CB400SF. You can do it!
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It'll be on the Model 3.
Installed on a Type 3 GSX1300R HAYABUSA.
In the OEM state, there was no rear inner fender, and there was a lot of mud splashing inside the rear suspension and fender, so it was strange to wash the car.
So, I bought this Inner fender for the Type 2, after seeing an impression that it could be pimped for the Type 3.
I was able to use Exactly to add the Bolt position and so on.
It's a shame that the Swing Arm and Tie Band fasteners are not included in the product.
I'm not sure how effective it is, but the integrated chain guard is now larger, so I think there is less chain oil on the swing arm and rear wheel.
Well, it could just be that the mileage has increased and the chain oil has decreased, but I think so.
View detail
Cospa best
It arrived surprisingly quickly.
I don't like carbon, so I chose FRPBlack.
Parenthesis is better
View detail