Reviews
The product itself is good, but ...
Material:I understand that this is a carbon product and that some modification may be required for installation, but the mounting holes on the frame side are obviously small (the bottom of the neck of the normal bolt was jammed, so I had to counterbore it).
The Exhaust System side also has a smaller hole, but this one has been penetrated.
If the OEM Nut is to be used, the Pitch should at least be matched, otherwise the Nut should be the same as the OEM Bolt. If you use the OEM Nut, you should at least match the Pitch, otherwise the Nut should be the same as the OEM Nut. If you use the supplied Bolt, you can get the corresponding Nut at a hardware store.
The quality of the bracket itself is not a problem, so I think the Style will be better, although it is conditional on someone with some modification skills and installation knowledge, or ask a PRO.
View detail
Magical racingRear Fender twill weave
I am a Magical racing believer!
I am disappointed with the Rear Fender this time, in conclusion. I thought that it was not the quality of 35,000 yen very much.
I understand that it is BackOrder to the extent that craftsmen make one product at a time and break molds, but that's your problem if you talk about it in a harsh way.
The position of the bolt was good, but the clearance of the part that covers the tire was at an angle. However, the clearance of the part that covers the Tire is 2~3cm shorter than the Tire, and the quantity of the Tire is not enough.:Pair (for Left and Right) The difference is huge! Looks awfully Parenthesis bad from the back! I am disappointed because I was very much looking forward to the delivery date.
This is a popular item, so if you are considering purchasing it, please be prepared to put up with it or give up on it.
My Fender was apparently ha Gap. I am very worried about the tank end waiting for delivery.
View detail
Fits: KAWASAKI ZX4R SE, KAWASAKI ZX4R, KAWASAKI ZX4RR, KAWASAKI ZX25R
It's a very expensive item, don't make me process it...
Bolt holes did not fit, so they were machined.
It's a little disappointing because it's an expensive purchase.
View detail
Carbon Side Cover is attached to New Model GSX1300R HAYABUSA.
The OEM side cover had a GizaGiza pattern that I personally didn't like, so I purchased a twill weave Carbon Side Cover from Magical racing.
My personal impression is Merit? If properly aligned, it will adhere well and cleanly.
As for the Demerit? The OEM frame has no screws, claws, etc., so it is not as strong as the OEM frame. The heat from the frame is transferred immediately and the thighs are hell. (It may be heaven in winter).
? The instruction manual is a bit of a mess. The instruction manual is a bit confusing.
I know there are individual differences, but in my case, I happened to have Impact, Double-sided Tape, and Silicon-off etc. tools, so I was able to install them by myself.
Bracket partially modified ? Side cowl is removed for chipping.
If you don't have such tools, I think you can throw them to Motorcycle shop.
I think the product itself is very beautiful and good, if a little dry.
View detail
Good matching with car body, no quality complaints
Carbon is used for the screen, and the appearance is satisfactory.
As for the windproof effect, OEMScreen says
Bugs on Shield of Helmet when running without lying down.
Large volume was a direct hit, but since I've been using this Screen
Direct hits are reduced to Large width.
I am very satisfied.
View detail
Although purchased from the impact of appearance, the fixed method to a motorcycle is NG in design. Since it is fixing by the handle post, without using the vibration absorption bracket of the top bridge of normal, a headlight shakes to Moro by vibrat
Although purchased from the impact of appearance, the fixed method to a motorcycle is NG in design.
Since it is fixing by the handle post, without using the vibration absorption bracket of the top bridge of normal, a headlight shakes to Moro by vibration of an engine.
the gaiety in which an attachment nut also idles -- after all, attachment is stopped and repurchased MRA.
It is painful study cost.
View detail
This time A front/rear A fender and a chain cover. although purchased A little unreasonableness has a hole location of attachment, and the result is not good considering a price. again -- a front/rear one Fender There is also no hole for a brake hose
This time A front/rear A fender and a chain cover.
although purchased A little unreasonableness has a hole location of attachment, and the result is not good considering a price. again -- a front/rear one Fender There is also no hole for a brake hose to be fixed. the detailed explanation of the front fender goods which made the hole by themselves and fixed the hose clamp -- exchange
there is no specification removing a wheel It was thought that it was unkind. Even if it also asks a manufacturer Such explanation is unnecessary. Come out of a word. Very unkind correspondence it was disappointed ... Is it the consciousness of the parts supplier for races???
View detail
Fits: HONDA CBR954RRFire blade, HONDA VTR1000SP-1, HONDA VTR1000SP2
One smart with carbon and light is good. F. Faulk's cover is large and safe.
One smart with carbon and light is good.
F. Faulk's cover is large and safe.
View detail
Cospa strongest
For the price, I am quite satisfied with the dress-up.
Push rivet should be a little longer than OEM to be sure.
View detail
Fits: SUZUKI GSR400
attachment
The RODFixing Screw of the Rear Sets was old and was replaced with this size and MaterialStainless Steel.
The prices are reasonable and helpful for Repair Parts.
View detail
Better looking than expected!
At first I didn't think I needed it, but as I replaced the front and rear Fender, Side cover, Screen, and Mirror with Magical's Carbon parts, I got around to it.
There is no comparison to OEM Product and the look is better than expected.
The OEM Product is naturally bonded with a strong double-sided tape, so it was a little strange to remove the tape, but the positioning was done cleanly in one shot, and I think it was worth the high price I paid.
View detail
Fits: HONDA CBR1000RR, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI TL1000R, SUZUKI TL1000L, SUZUKI SV400, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZXR750, KAWASAKI ZX-9R, KAWASAKI ZX-7RR
Magical racingRacer replica mirror
I wanted a mirror for the Racer, so I chose the Magical racing. It takes about half a year for delivery. View detail
MagicalRacing rear fender
Rear area is no longer dirty.
It looks good in Carbon.
View detail
Best for DOING
It came in surprisingly quickly.
Originally, it was a MODEL with few custom parts, and Screen had two choices:Puig, which was attached before, and this one. (There are others, but they are Parenthesis bad.)
As expected of a Magical product, the texture is perfect.
It also looks more fearless, standing lower than any other product.
The holes were slightly misaligned, so they were carefully tightened.
If I wanted, it would be 100% if it were a little shorter since I don't have a windshield effect on the plane anyway.
View detail
Can be installed on 2021 models
[Usage]
I purchased this product because I was dissatisfied with the quality of the OEM Front Fender of the SC80.
[Is what you received as Image?
As shown in the image, Twill Weave Carbon has a glossy and luxurious look.
Manufacturer has not confirmed that the 2021 SC80 is compatible with the 2021 SC80.
The OEM Fender part number is the same as the 2019 model so I have no hesitation in purchasing it.
Was it difficult to install?
We were able to install it on the 2021 without any problems.
BrakeCaliper and Tireetc. must be removed for installation.
I would have asked Shop to help me with this because it is an important part to attach and remove.
I installed the parts by myself because I was told that Manufacturer could not do the installation work for the parts which were not confirmed to be compatible.
Torque wrench is absolutely necessary.
If you have the tools and care for the Brake relationship, the work is relatively easy.
[Try it?
I am very happy with the OEM and the look of the product has changed so much.
Included Parts:?
The brake hose clamp is securely attached and each hole is accurately made.
Bolt nut included is Quantity:Pair (for Left and Right) Replace with OEM one location at a time.
RubberCushion will be diverted from OEM.
Instruction Manual is included, but the product is Large sturdy even without it.
If you are a 2021 Owner and are not confident in your ability to work on it, you should not purchase it.
View detail
Missing items as usual
I ordered it almost as soon as it went on sale, but it was automatically cancelled due to a missing Manufacturer.
As usual, I would like to have more detailed information like delivery date, if you are able to contact the Manufacturer, instead of trying to order again after 3 months or so.
View detail
A definite must-have!
It is a comforting Screen, but the precision of workmanship and thickness are perfect. View detail
Rear Fender
It is longer in the back than the OEM Rear Fender to prevent dirt around the Rear suspension.
It's carbon, so it looks good.
It is also well made.
View detail
Fits: BMW K1200RS, HONDA CBR1100XX SUPERBLACKBIRD, KAWASAKI ZRX1200S, KAWASAKI GPZ900R, YAMAHA TMAX500, BMW F650GS, BMW F650GD, Others
Moving parts.
GPZ900R with Super long I installed it with the Bracket. The view is not as good as the later Mirror, but it is better than the earlier Mirror. The middle Elbow had to be fixed once the position was decided. I thought this part could be movable, but unfortunately, it was not. Also, I changed the screw from a regular silver Hexa to a black-dyed Stainless Steel Button Screw. View detail
Magical Racing Fitting Plate Rubber
Magical Racing Fitting Plate Rubber in good quailty , let me easy to fitting the rear view mirrors on my bike . More spare parts provided from this brand , good brand for us, View detail