Reviews
Made-to-Order indeed!
As expected of a made-to-order product. The quality and gloss of the carbon are excellent, and the weight can be reduced.
The area around the Radiator Cap was beautifully processed.
View detail
Parenthesis is better now.
I installed the Under Cowl to prevent OIL from dripping on the circuit, but I installed the Parenthesis because I like the Parenthesis. I think the OEM Exhaust System is easy to install (the sensor mounting screws on the side stand are coated with anti-loosen agent, so be careful not to lick them). (The sensor mounting screws on the side stand are coated with a non-loosening agent, so be careful not to lick them.) View detail
Best in both design and quality
Mounted on 390duke 19 MODEL.
The accuracy of the mounting holes is perfect.
However, the Motorcycle side differs somewhat from year to year.
Since there is no tap processing on the swing arm of the Chain Guard side attachment, a 5mm nut is separately required.
The mounting area by the Rear suspension is 2 or 3mm longer with the supplied Bolt because of the short Tap length.
An additional washer or a shorter bolt is needed.
I am satisfied with Large as both design and quality are good.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
The sense of ownership is unbearable.
Since it is the part that is visible when driving, it fills me with a sense of ownership and is very satisfying.
However, it was not easy to obtain the product because it was on order, and I felt that it would be impossible for an amateur to install it, so I asked Shop to do it for me.
View detail
It was more hade than I expected.
Ponting with Double-sided Tape (pre-pasted on the inside of the Body).
The actual product was more flashy and closer to silver than what I saw in the picture. 。 It didn't feel right at first.
This might be good once you get used to it. 。 I have come to think that this is a good idea.
We also used ELMeter for the meter, so the area around the PadMeter was glossy.
View detail
Self-satisfied...
[How is it used? City Riding - Touring - Circuit - Mountain Pass
Was the one you received as per Image? Very beautiful piece.
Was the installation difficult? Pimp it!
How was your experience with it? Not at a Level where the effect can be felt, in general, self-satisfiedParts
[Included Parts:were they on? With AdapterParts for installation
[Was there anything that disappointed you? None
Other items that would be helpful
[Opinions and requests to Manufacturer Could you do it a little cheaper! I gave it 4 stars because it's way too expensive!
View detail
Self-satisfaction + hope for effect...
[How is it used? City Riding - Touring - Circuit - Mountain Pass
Was the one you received as per Image? A beautiful piece of work.
Was the installation difficult? Crimp only with Double-sided Tape
How was your experience with it? Since I have the Rear Sets installed, the Footpeg is higher than the OEM, so the air enters and exits from the right position, so I think it was effective....
[Included Parts:were they on? None
[Was there anything that disappointed you? None
Other items that would be helpful
Point and hang of installation OEM footpeg can be attached to the footpeg! But, it is designed to release air, so there is a risk of hot air hitting your feet. 。 If Rear Sets are included, might they have to be removed and installed?
View detail
Self-sufficiency..., (2)
[How is it used? City Riding - Touring - Circuit - Mountain Pass
Was the one you received as per Image? Very beautiful piece, too expensive to give it 4 stars!
Was the installation difficult? Just crimp the top with double-sided tape...
How was your experience with it? Weight reduction? Not ... only self-satisfaction!
[Included Parts:were they on? Included Parts:None
[Was there anything that disappointed you? I thought it was OEM removal and installation!
Other items that would be helpful
[Opinions and requests to Manufacturer Meter cover, so can you lower the price a bit?
View detail
be a bit irritated
The Frame cover is a standard Frame cover, so after running and warming up the Frame, you can simply degrease it and apply it quickly and easily.
The function of reducing the heat of the so-called Frame has been achieved, but …...
The cooling Duct, which is a feature of this product, is quite raised here, so something lumpy asserts its presence during Step work. (I am) It bothers me quite a bit, it doesn't bother me when I'm Touring and driving straight.
Also, when you are stuck in a traffic jam, you can only feel the hot air coming up from this hole in the opposite direction, which is a pity Point….
During driving, I have the impression that driving air is sucked out of the Rear cutout by negative pressure, rather than being drawn in from the Duct.
So, although the holes are cool, I can't help but feel that there could have been a little more done to make it more functional.
View detail
I think it's very satisfying because it's the part you see when you get on the train.
Remove the OEMInner panel and foundation, attach the included FRPBracket and install this product - a 10 minute job.
However, the OEM has a push rivet and pawl on the side of the meter to hold it in place, but this product does not have a fixation in that area, so it flexes when force is applied from the front side….
I guess it is not something to worry about in the normal use range, but I was concerned about it, so I put the FRP Bracket on while leaving the OEM base, and then I put the FRP Bracket on the top of the bracket and fit it in.
View detail
Used for Seat Cowl for Race
I purchased the 20? I am using it with the same Manufacturer 10? that I had in stock, making a total of 30? View detail
Everyone likes LargeCarbon parts
The surface is [Color] ClearGel coat
Urethane for weather resistance to ultraviolet rays [Color] Apply Clear, etc.
I am substituting by Rear's Coat.
It is carefully made and includes Sticker and others in Included Parts:.
Rear tire must be removed or shifted for installation.
If it is too much for you to handle, ask Shop.
View detail
MagicalRacing ChainGuard
We took the opportunity to exchange the Chain for a NORMAL Chain Guard.
The quality is solid, as the company is a long-established leader in carbon parts.
Material:Just by replacing the plastic Chain Guard, the Rear area will be much tighter.
Replacement is quite easy, but it may be better to ask a Motorcycle shop to do it because it is difficult to access the tool when the bolt that holds it in place has a Tire on it.
The order was placed through WeBigOrder. They ship it securely packaged and wrapped in Cushion, so I didn't have to worry about it getting damaged in transit!
View detail
If only the accuracy were a little better...
The OEMFender removal was a little Large weird, I bought the FRP one and it looks perfect, both in texture and looks!
However, the position of the hole on the License Plate is not the same as that on the Quantity:Pair (for Left and Right) It was not symmetrical, and the Fender itself moved up and down with the supplied Bolt, so a little ingenuity was required to install it.
View detail
Wow that's cool
It's cool, but I don't run Circuit, so I'm not sure how effective it is. View detail
Wow that's cool
It can save just a little weight. View detail
We were able to reduce weight and mud splash.
It is lightweight, mud splash resistant, and looks cool. View detail
Installed on New Model GSX1300R HAYABUSA
[How is it used?
Installed on a New Model GSX1300R HAYABUSA to enjoy the Winding.
Was the one you received as per Image?
The Twill Carbon weave is very beautiful.
Was the installation difficult?
It is very easy to stick with double-sided tape.
How was your experience with it?
Even just not touching the Frame directly was quite effective.
Cooling performance also seems to have improved, perhaps thanks to the product's unique Air Intake feature.
[Included Parts:were they on?
Included Parts:Not available.
[Was there anything that disappointed you?
None
View detail
I bought it because I heard that Meter dissolves.
I bought this to prevent Meter from melting under the influence of Screen.
For now, it is Cool.
That's all.
View detail
Magical racing Rear Fender Twill Weave Carbon
The only problem is that the front of the Right Side is a little tight and the back of the Right Side is difficult to put the bracket down.
The part that covers the Tire after installation is very distorted and the Tire ground surface and the Fender's Quantity:Pair (for Left and Right) The difference is distorted by about 2 cm and Parenthesis is bad.
I can't fix it in any way, and it seems that I'm missing the boat in terms of product. The price should be lowered for this QUALITY!
I am so disappointed because this never happened before. I guess it's the same QUALITY even if I return it and get it replaced...
View detail