Reviews
Fits: KAWASAKI NINJA2 Helmet50R ABS, KAWASAKI NINJA400 (2014-)
Design is the best!
The unique design is cool.
The finish is excellent and can be easily installed.
However, Carbon parts are hard because of the long delivery time.
View detail
LargeSatisfied over the price!
I am not sure about the wind protection effect, but I am satisfied with the large size and the improved appearance of the parenthesis. View detail
?????
[How is it used?
It's working fine.
Was the one you received as per Image?
Coloring was also satisfactory with the same color as the OEMCowl!
Was the installation difficult?
I made the Cowl Bracket by hand, so it was a bit of a struggle, but if you are an OEM, I think you can make it as Smooth as a screeno replacement!
How was your experience with it?
I personally like it very much.
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Looks cool!
The price is a little high, but...
Satisfaction level is Max.
View detail
Magical racing indeed!
Installation was easy, as it was designed specifically for the car model.
(Chain Cover behind Left has been cut a little)
But is it a Normal muffler assumption?
My CB400SB has an external Full Exhaust System, but there is almost no gap between the bottom of the exhaust system and the bottom of the cowl. (Postcard does not go through) AluminumHeat Seat was applied for heat protection.
When I installed it, Parenthesis improved so much that I don't care about that, and I am really Large satisfied.
View detail
Magical racing indeed!
Magical racing indeed!
The part that enters the view is smaller than the products of other manufacturers, but it is made in consideration of the bank angle, and because it is manufactured for each car model, it can be installed avoiding STAND, although it is still in the temporary fixing stage.
One disappointment is that it is based on Normal muffler?
My CB400SB has an external Corresponding Exhaust, but the bottom exhaust pipe assembly is in contact with the bottom of the Under Cowl.
I'm going to put a heat-resistant aluminum sheet on it for the time being, but if that doesn't work, I'll have to cut the parts that are in contact with the Exhaust System. I just pray that the heat-resistant aluminum sheet will fix the problem.
Other than that, I am satisfied with the level, so I would like to enjoy my motorcycle life with CB400SB which has improved parenthesis by wearing Under Cowl.
View detail
The lines fit well and the front supports well, so it helps to drive
The lines fit well and the front supports well, so it helps to drive
And the space in the middle is strong and sturdy, so there is a sense of stability. The design is good, the gloss is good, and the lines are really good. It's perfect for supporting my stomach. It seems to be perfect for tall people and I highly recommend it ------------------------------------------ ------------------- The line fits well and supports it in front of you, helping you drive And in the middle, the space is powerful and great, so it's quite stable . It is perfect for supporting the dysfunction. I think it's perfect for tall people and I highly recommend it. Powered by Google Translator
View detail
Moderate presence
I wanted to create a sense of unity with Radiator because it felt like it was attached to me.
There is no particular problem with Fitting.
It has been about 4 years since it was installed. [Color] There is no particular sense of deterioration of the Clear layer.
It is difficult to open and close the Radiator Cap, although this happens infrequently.
The OEM has a slit that I believe leads to the air cleaner intake under the tank, but this one has no opening.
Unlike Full Cowl, there was no duct or rectification in the pathway, so it may not affect it that much, but I am a little concerned.
Another minus point is that the fiber density may be a little rough, and it looks translucent when exposed to direct sunlight.
Radiator has been changed to a Large type since the 21 model year, so care must be taken to ensure compatibility.
View detail
High-quality Mirror
The OEM Mirror was style-oriented, with few adjustable functions and a spec. that made it difficult to secure rearward visibility. Therefore, the only Mirror that is stylish, adjustable, and has a full range of specs (Carbon and Blue Mirror) is Magical racing's Mirror. The price is high, but I think it is an excellent product that fully satisfies the sense of customization. View detail
Magical's Carbon parts are generally too expensive Image
Installation is as simple as covering and affixing on both sides.
The build, texture, and appearance are good, but the MagicalRacing sticker attached to the center was a little gapped, not in the center, and the way it was attached was messy. Unfortunately, I had to remove it because it looked bad because it had a wrinkle in it.
It was a very disappointing product, even though the product was not bad.
All of Magical's carbon parts are too expensive in general. I was a little bit disappointed.
Well, I lost faith in Magical after seeing the messy way Sticker pasted it! (Lol)
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA MT03
Thinner than I expected.
I bought it from Circuit Running.
I also have AGRASEngine Guard installed, but I bought it just in case.
Is it because of Twill Weave Carbon? I am somewhat worried because it is much thinner than Image. Regulation Torque (10N.m) The Coat on the surface was lightly damaged just by tightening it with the "Tighten" button.... I think it's not a problem if it can be guarded properly when it falls down.
View detail
2020 Redition
I really wanted twill weave, but I bought the plain weave Smoke Type, which was in stock because it was made-to-order.
I was going to do the installation myself, but I brought it in and installed it at a motorcycle shop.
I am generally satisfied with the product. I think that the Motorcycle Image has changed a lot with the installation of the product. I think the wind resistance has improved a little.
I haven't done that long of a distance yet, so I'm looking forward to seeing what happens.
Well, I am satisfied because I purchased it for its appearance rather than wind resistance.
Magical racing's homepage does not state that it fits the 2020 Z1000, but I was able to install it on the 2020 without any problems.
View detail
rear seat cowl for a yamaha vmax 1700
i love it . i ordered the black one . i hope they have back in stock the carbon twill weave . if they do i will order also.its very nice very good quality. very hapy about and the shipping was fast.thanks webike. View detail
There is a sense of quality
It is very cool and has a high quality feel. The price is high, but I am really glad to wear it. It's a big difference from cheap ones that don't have the same quality.
Installation was done with the supplied screws and washers using the existing receiving screws. The hole and shape were perfect and it took only 15 minutes. Be careful not to screw it in too hard, otherwise the receiving screw will come off and you will have to remove the cowl. (Experienced) Save the attached receiving Screw.
The attached braid is cut and inserted only on the top, and the Sticker is attached to complete the Commendation.
View detail
Quick …
I like the texture of the product.
However, when I first put on the MA-1 I just bought, the zipper scratched it.
But thanks to that, Tank is unharmed, so I think we've achieved our original goal.
View detail
Parenthesis is good.
Carbon's Radiator Shroud.
The design is more forward than the NORMAL, and is larger in size.
Will there be a lot of wind?
Well, I am satisfied with Large because the design is better than the functions.
Installation requires drilling holes in the OEMCowl.
View detail
I'm sorry
It may be an individual difference, but the accuracy is not very good. There is inevitably a gap.
Tape is attached to the reverse side from the beginning, but the adhesive is weak and does not stick.
I managed to install it by adding another Tape.
Although not shown in the product image, there is a seal by magical attached under the meter panel.
The price is 20,000 yen, which makes it an iffy product.
View detail
Magical Believers
I have been interested in this product for a long time, and I happened to know that it was in stock. I have been looking forward to using it for a long time, and it just happened to be in stock. View detail
Magical racing twill weave Carbon Mirrors NK-5
The price is not inexpensive. The quality of the product is satisfactory, as it is carefully crafted in every detail with genuine CarbonMaterial.
The wide field of view with Blue convex Lens is also easy to see, and the functionality as a Mirror is outstanding. The adjustment mechanism of each part is also well thought out, and it can be said that this product is well worth the price.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, SUZUKI TL1000R, SUZUKI TL1000L, SUZUKI SV400, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R600, KAWASAKI ZXR750, SUZUKI GSX-R1000, KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZX-7RR
Really Nice!
Made in Japan so nice ! Very beautiful rear mirror, fine workmanship, close to perfection, Easy to install, the lens is much better than the original lens！ View detail