Reviews
It is only decoration if it says. -- Once the engine performance is not necessarily improved just because it attached this, and it attaches [ --, however ], it cannot remove any longer. Some parentheses of the pure panel of ZX-12R are bad with the pri
It is only decoration if it says. -- Once the engine performance is not necessarily improved just because it attached this, and it attaches [ --, however ], it cannot remove any longer.
Some parentheses of the pure panel of ZX-12R are bad with the printed carbon design.
Since it is a portion which goes into eyes well anyhow, the degree of self-satisfaction is high! Its own car takes to it more.
Probably, it is worth having incurred but [ so ].
Because fitting was shifted from a price exceeding 10,000 yen just for a moment that they are three stars --
View detail
It is the impression of twill carbon rear fender two-month use of MagicalRacing. From the time of purchase of vehicles, it cared about severe [ of splashes of mud ], and the badness of texture. Since it is scheduled to purchase the press carbon li
It is the impression of twill carbon rear fender two-month use of MagicalRacing.
From the time of purchase of vehicles, it cared about severe [ of splashes of mud ], and the badness of texture.
Since it is scheduled to purchase the press carbon license holder of Y'S GEAR, a rear fender is also united and exchange is considered.
Although the carbon rear fender was sold also in the other company, evaluation used the product made from high MagicalRacing.
[Using feeling] Modeling of - texture curve, the texture of twill, and all the glare paint application are wonderful.
Since a pure twist is also a long rear fender, it is conspicuous, and the design which emphasizes the thick tire of FZ1 by the tip being extracted does not collapse.
- Although a weight and durability measurement are not carried out, it is weight about the same as pure.
Molding is solid and a pure twist also looks strong.
- Although it is an attachment bolt-on design, it is necessary to move a rear brake hose by attached stay.
When the tool had a hexagon wrench and a plus driver, it was possible.
It is time required about 30 minutes.
- In addition to this, the MagicalRacing sticker of two size is attached.
It referred to another Ho's review and has stuck the small sticker to the rear side.
[Problem] It is thought that the splashes of mud in case of rainy weather have seldom changed.
Since a pure twist is long, it is in Ho's besides whether it has been improved a little -- review, but it will be distorted if a bolt is tightened as it is.
It has solved because left-hand side pinches a 1-mm washer.
The [last] Completeness is the recommend which is very pleasing highly.
View detail
It attached to KDX220. Although it was an object for D tigers, it was processed, and fixed and attached to the under guard of aluminum. Since there was no undercowl for KDX, D tigers were used, but it is a cinch comfortable. Since the car body
It attached to KDX220.
Although it was an object for D tigers, it was processed, and fixed and attached to the under guard of aluminum.
Since there was no undercowl for KDX, D tigers were used, but it is a cinch comfortable.
Since the car body was also converted in the style of a motard, it became ON speciality thoroughly now.
Since the gap with the ground surface after cowl attachment is about about 10 cm, some level differences are OK.
Certainly [ that / diverting and processing the parts which are not and also attaching, or / since it is pleasure of KASUTAMU, that it devises ].
View detail
Although it worried about FRP black with Type-R of purchase A-TECH, in the touch which carried out purchase temporary attachment of [ here ] by appearance, it seems to be rather accurate. Although it is under paint application now and attachment is im
Although it worried about FRP black with Type-R of purchase A-TECH, in the touch which carried out purchase temporary attachment of [ here ] by appearance, it seems to be rather accurate.
Although it is under paint application now and attachment is impossible yet, the forme here is liking individually.
Because the chief obstacle is a price, it is peevish and he can buy the carbon of Type-R with the same price ...
View detail
The side cover without sex appeal was exchanged for the twill carbon made from magical racing with the lusterless black resin part. It is magical racing truly. The texture of carbon and surface gloss are very beautiful. Attachment is only the
The side cover without sex appeal was exchanged for the twill carbon made from magical racing with the lusterless black resin part.
It is magical racing truly.
The texture of carbon and surface gloss are very beautiful.
Attachment is only the bolt on which removes and changes the bolt of normal.
Although left-hand side had a key for tandem seat removal, since the keyhole had shifted a little, * was taken as one minus.
View detail
Although it was an expensive thing, since ETC was also satisfactorily passed by structure of carbon and a smoked screen, good shopping was made.
Although it was an expensive thing, since ETC was also satisfactorily passed by structure of carbon and a smoked screen, good shopping was made. View detail
By lusterless black resin, since an authentic positive one was insipid, it exchanged them. Since the bolt stop is carried out to the flesh side of the swing arm, you have to remove a rear tire in the case of exchange. The work itself is easy.
By lusterless black resin, since an authentic positive one was insipid, it exchanged them.
Since the bolt stop is carried out to the flesh side of the swing arm, you have to remove a rear tire in the case of exchange.
The work itself is easy.
The texture of twill carbon is beautiful, and since it can be dressed up easily, it is a recommend.
View detail
Appearance becomes quite smart! The form of the cowl itself changed very much and became a quite racy image. Change did not unsatisfactorily have the windscreen effect. It became that it is easy to be noticed since Wright of an oncoming car reflec
Appearance becomes quite smart! The form of the cowl itself changed very much and became a quite racy image.
Change did not unsatisfactorily have the windscreen effect.
It became that it is easy to be noticed since Wright of an oncoming car reflects.
If a handle is still pure, bolt-on can be carried out, but since a clutch hose and a brake hose interfere when the handle is changed, and processing is serious with sander, a nipper file, etc., only the point should take care.
Since the nut is insufficient, the direction in which the back has attached the pure front big cowl needs to be prepared.
But since a parenthesis is the best, we recommend you appearance after attaching.
View detail
Since the circumference of a front was felt refreshed, it purchased. A ninja has the information which cannot perform attachment of a fender, if a front tire is not removed, but if it devises, even if it will not remove a tire, it can work comparative
Since the circumference of a front was felt refreshed, it purchased.
A ninja has the information which cannot perform attachment of a fender, if a front tire is not removed, but if it devises, even if it will not remove a tire, it can work comparatively easily.
Since it becomes impossible to use the stubby of fender back with Gasset on a pure fender flesh side, the rigidity of the circumference of Faulk may fall.
Is it better to attach a stubby together with a fender? Although the fender of MR is made thinly and it thinks whether it is OK than expected, if fixing it with Faulk with a bolt, tension comes out and it becomes brave just like pure.
Since twill was chosen, appearance is also good! Since the bolt which fixes a fender decreases from pure six to four, Faulk's prepared hole can be seen and I think that it is not quite satisfactory.
Since it is *x5, it is peevish and satisfactory in ~ reinforcement, if it is 6 bundles, but appearance becomes not quite satisfactory -- In my case, the bolt nut was bound tight and it plugged up Faulk's prepared hole.
Although the price is cheaper than the other company, a result is satisfying enough.
It is recommended!
View detail
It has ridden on K8. Structure of a cowl and paint application are true. The catalyzer of a normal muffler also hides finely. However, if a heat insulating material is not stuck, it is likely to burn. the direction processed in part is not
It has ridden on K8.
Structure of a cowl and paint application are true.
The catalyzer of a normal muffler also hides finely.
However, if a heat insulating material is not stuck, it is likely to burn.
the direction processed in part is not burned in case of an external article muffler -- or .
A lower feeling of SUKASUKA disappears, we become a race ish considerably, and it is recommended.
View detail
The seat end of CBR250RR was equipped. since it will become HAME removed when taking a seat cowl into pieces if it attaches as it is, I cut from middle -- the right and left of a seat cowl -- it stuck independently.
The seat end of CBR250RR was equipped.
since it will become HAME removed when taking a seat cowl into pieces if it attaches as it is, I cut from middle -- the right and left of a seat cowl -- it stuck independently.
View detail
Since the undercowl of the pooch with which it has equipped had dissatisfaction, it purchases. Attachment is easy, and is about 10 minutes, and it is the end of work. Although it is not large satisfaction, he has especially no dissatisfaction.
Since the undercowl of the pooch with which it has equipped had dissatisfaction, it purchases.
Attachment is easy, and is about 10 minutes, and it is the end of work.
Although it is not large satisfaction, he has especially no dissatisfaction.
View detail
Since the dirt of a rear tire inner side is severe, it purchases. When equipped, dirt became a reduction by half and less than it, and mud stopped flying to a rear shock. It is pure and I feel that you may be attached from the first. Although
Since the dirt of a rear tire inner side is severe, it purchases.
When equipped, dirt became a reduction by half and less than it, and mud stopped flying to a rear shock.
It is pure and I feel that you may be attached from the first.
Although the rear tire was removed for wearing and it was with --, since there was a little resistance, the rear tail part was decomposed from the sheet.
Unless it carried out so far, a fender did not enter.
Those who are going to purchase VTR from now on consider that it is better to buy it.
View detail
I got this in today it really nice feel totally happy with it
I got this in today it really nice feel totally happy with it View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Appearance also became smart, and suspension also became dirty, and I would not get damaged, and thought on the motorcycle that it was a thing very good.
Appearance also became smart, and suspension also became dirty, and I would not get damaged, and thought on the motorcycle that it was a thing very good. View detail
To the circumference of a meter, I thought after all that a dress-up up was required. Is an impression different, if there is nothing when it is? The twill of a magical is beautiful and recommended.
To the circumference of a meter, I thought after all that a dress-up up was required.
Is an impression different, if there is nothing when it is?
The twill of a magical is beautiful and recommended.
View detail
A pure fender is a thing to follow very much since it is not attached. In the state where it is not attached, suspension and the other muddy water which splashed against sheathing are poured on Moro. It is a big difference, if nothing when it is.
A pure fender is a thing to follow very much since it is not attached.
In the state where it is not attached, suspension and the other muddy water which splashed against sheathing are poured on Moro.
It is a big difference, if nothing when it is.
It stops starting suspension.
However, probably because the portion which wraps in a tire part is short, it is flying to sheathing very well.
Since he did not plan to have hardened sheathing with carbon, it was made FRP specification of the design which is not amusing even if it is pure and is attached.
It was actually deceived by several persons.
View detail
The CB400SF specifications III were equipped! He thinks from beforehand that it wants, and it has settled and purchased mind! Although attachment was an amateur, it was attached somehow in about 1 hour. Immediately after wearing, although interfered i
The CB400SF specifications III were equipped! He thinks from beforehand that it wants, and it has settled and purchased mind! Although attachment was an amateur, it was attached somehow in about 1 hour.
Immediately after wearing, although interfered in side stands, it tunes finely somehow? It was able to do ...
He has a feeling whose appearance settled very much, and it is very pleasing! It is a recommend by all means.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX)
In the place made into the fender less, and the normal inner fender, Z1000 ran the wet road surface, or became, wound up muddy water, and when severe, it was like [ adhering to the helmet rear ]. Then, it thinks about inner fender wearing longer than
In the place made into the fender less, and the normal inner fender, Z1000 ran the wet road surface, or became, wound up muddy water, and when severe, it was like [ adhering to the helmet rear ].
Then, it thinks about inner fender wearing longer than normal.
Each manufacturer was compared and decided with the photograph.
form -- normal -- more than ten -- CM -- it is long and the area which covers a side is also increasing.
It tends to work that wearing removed the right step and left SARENSA as the description.
Without the mounting hole having also shifted, it was unprocessed and has equipped.
The wet road surface is likely to be mitigable a little, although not run yet.
However, I think that it is fundamentally unavoidable that there are a little splashes of mud depending on the fender less (I am the CLEVER WOLF make) with which it equips since a seat cowl is shorter than a rear wheel.
although the original purpose is probably differed from.
Anyway, the form etc. are pleasing.
View detail
08 hayabusas were equipped with the carbon trim screen of magical racing. Although it had equipped with the screen (racing) of MRA in front of this product in fact, behind, the design of the goods here was worrisome and purchased. I think that it
08 hayabusas were equipped with the carbon trim screen of magical racing.
Although it had equipped with the screen (racing) of MRA in front of this product in fact, behind, the design of the goods here was worrisome and purchased.
I think that it is preeminent for a design.
Since there is also height compared with a pure screen, in high speed operation, a difference is known clearly.
Although it is more expensive setting out compared with other screens, I think that there is worth of that in this design.
However, although it is two-sheet composition, compared with the screen of single sheet constitution, rigidity will fall to a sake.
This point will consider it as evaluation of four stars as negative implications.
View detail