Reviews
Poor accuracy
Dealer got pasted according to new car purchase, but various places will float.
From Dealer 's Mechanic, it was said that sand etc will enter from the floating place and Wound will be attached, and it was removed instantly.
Material : It may be a characteristic of the Carbon product, but I did not buy it with a high Gold paid.
View detail
Processing required for installation
When installing, you need to shave considerably, and the attached Tape is not enough at all, so you need to buy it.
In addition, as Meter's Button operation becomes difficult, compromise is not allowed for installation processing.
View detail
Fits: KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1100
I would like to expect a slight improvement in quality only for well-known Manufacturer.
Material of Magical racing : It is possible to say to all Carbon products, but I want you to work hard on finer details a little more.
Personally Material : Material from Carbon : Recommendation to paint with FRP.
View detail
It looks nice
CB400SB (NC42) Painted to Red and fitted.
Instruction Manual Exactly attached to places as raw.
STANDetc. No interference at all, accuracy is no problem.
It functions as Oil receiving without problem.
..., but the body touches the ground before the Full bank floating and falls over.
It will not be used as it is at Circuit and Pass.
I get in touch with a little Gap on the street ride.
CB400SB (Or SF) It is that the design of itself is not a premise to wear an Under Cowl.
Sorry for the high degree of perfection in appearance.
Since it can not be helped, it shifted considerably in the front direction and it stopped with Tie Wrap.
While this is grounding the Under Cowl CHALYCHALY, you can do a full bank up to the extent of footpeg rubbing.
It seems like people in a riding way that does not let you bank in appearance is good.
View detail
After accident repair
Following the repair that was hit around Number, we ordered via store and asked for installation.
I have no idea about the accuracy of the mounting hole as it is left to the shop, but it is attached to the Beauty without the installation being tilted, in particular.
Bracket of the License lamp seems to be a common part, but Body is twill weave against plain weave, so if you want to unify the atmosphere at all, I want you to make it black.
Material of Body : Carbon Style seems to be only in the visible range, and the inner part is FRP? It does not matter, but there are some areas where you can see where the bubbles entering the switch become Crater and appear on the surface, That's a pity.
View detail
Cost performance Bad
Although the price was expensive, I bought it by being drawn by other looks.
Carbon and Super coat are so conspicuous that they are satisfactory to the eye.
However, Super coat part is considerably brittle, and it will scratch immediately.
Because there is a Carbon part, visibility in the screen is quite bad though it is natural.
It took a long time to deliver the product, the delivery schedule was stretched twice and it took 1 month from the order.
Also, when installing, the size of the hole was too small, so it could not be installed without processing.
The Carbon and Super coat parts are cheap at the Rivet 4 point stop and Vinyl protecting the enclosed Screen does not match the body of GSX 1300 R HAYABUSA and does not make sense.
There is a large step difference at the joint between Carbon part and Screen part.
Windproof effect is not different from OEM.
The instruction Instruction Manual of the product is enclosed and it does not go away, and the accuracy of the commodity felt quite poorly in proportion to the price.
View detail
The goods themselves and the Rubber which is not damaged although it is extremely good were very cheapie, and it was disappointed. I wanted you to use the Rubber of a near Protector pure at least.
The goods themselves and the Rubber which is not damaged although it is extremely good were very cheapie, and it was disappointed. I wanted you to use the Rubber of a near Protector pure at least. View detail
The undercowl has no complain and since the rubber of the stay non-slip was attached, the silicon spray is sprinkled on the rubber surface and a frame when attaching double-stick tape, cutting in a half and attaching to a total of eight-place attachment f
The undercowl has no complain and since the rubber of the stay non-slip was attached, the silicon spray is sprinkled on the rubber surface and a frame when attaching double-stick tape, cutting in a half and attaching to a total of eight-place attachment frame to a stay inner side, it is easy to decide a position. It sprays to a stay inner side and a frame (a temporary stop) and the cowl attached so that there may be no gap in a cowl and stay (it fasthens strongly) and the position is decided, a total of four places of the stay which removes the cowl which tightens the screw of a total of four-place upper part of stay, and a lower screw will be tightened. Up-and-down part are bundled. It wipes by a silicon cleaner. A description is unkind and I would like to have a detailed instruction. Stays are different in each, if it is separated, it would be difficult. For your reference. View detail
This time A front/rear A fender and a chain cover. although purchased A little unreasonableness has a hole location of attachment, and the result is not good considering a price. again -- a front/rear one Fender There is also no hole for a brake hose
This time A front/rear A fender and a chain cover.
although purchased A little unreasonableness has a hole location of attachment, and the result is not good considering a price. again -- a front/rear one Fender There is also no hole for a brake hose to be fixed. The hole was made by itself and the hose clamp was fixed. the detailed explanation of front fender goods -- exchange
there is no specification removing a wheel It was thought that it was unkind. Even if it also asks a manufacturer Such explanation is unnecessary. Come out of a word. Very unkind correspondence it was disappointed ... Is it the consciousness of the parts supplier for races???
View detail
This time A front/rear A fender and a chain cover. although purchased A little unreasonableness has a hole location of attachment, and the result is not good considering a price. It is a front/rear again. Fender There is also no hole for a brake h
This time A front/rear A fender and a chain cover.
although purchased
A little unreasonableness has a hole location of attachment, and the result is not good considering a price. It is a front/rear again. Fender There is also no hole for a brake hose to be fixed. For exchange, the detailed explanation of the front fender which made the hole by itself and fixed the hose clamp a normal fender.
It removes. There is also no explanation. It was thought that it was unkind. Even if it also asks a manufacturer It was unkind correspondence. Is it the consciousness of the parts supplier for races???
View detail