Reviews
Cheesy
thanks for the help 。 This product was poorer than I expected.
The thicker the better. It was Shock because we have had good purchases in the past.
View detail
The hole didn't fit w
The hole was out of alignment.
The $1,200 Yahoo! one was more accurate.
View detail
Screw holes don't fit w
Screw holes don't fit w
I'd be happy with Home center Bracket for this.
View detail
Refreshing
I bought it to make Tandem step less.
Bracket for fixing Fluid Tank.
The texture of the plain weave Carbon is very good, with a solid and rigid feel.
View detail
Cospa strongest
For the price, I am quite satisfied with the dress-up.
Push rivet should be a little longer than OEM to be sure.
View detail
Better looking than expected!
At first I didn't think I needed it, but as I replaced the front and rear Fender, Side cover, Screen, and Mirror with Magical's Carbon parts, I got around to it.
There is no comparison to OEM Product and the look is better than expected.
The OEM Product is naturally bonded with a strong double-sided tape, so it was a little strange to remove the tape, but the positioning was done cleanly in one shot, and I think it was worth the high price I paid.
View detail
Cospa best
It arrived surprisingly quickly.
I don't like carbon, so I chose FRPBlack.
Parenthesis is better
View detail
Fashion casually, just watch out for Edge!
I've used it for 5 years with no problems at all, it's great.
My motorcycle is black, so it doesn't stand out that much, but since I'm using carbon for all the other parts, it's great to have a sense of unity.
The positioning of removing and attaching the NORMALPanel is a little tricky, but it's easy because it's just double-sided tape attachment.
But be careful not to get hurt because Edge is standing quite a bit when you raise Tank for maintenance.
View detail
It's cool to look at.
If it is OEM Duct, the collar of Aluminum is attached to the position of the Bolt of photo 2 and it protrudes about 5mm, but this product is not attached. I put the Bolt into the Duct and tightened the Bolt after biting 5 pieces of Flat Washer from the inside of the Duct instead of the collar. Small Cutting more than 2 millimeters in diameter, a little hard? I applied grease at the place where the grease was applied and pushed it in, and if you look carefully, you can hear sinar and BALIBALI sound with Wet carbon. I think you can put it on if you want. View detail
Good job Parts!
Removing the MT-09SP Tandem Footpeg because it's in the way! I thought I was going to make my own bracket, but Magical racing sent me these great parts.
The Carbon is very stylish. I was also worried about the Bolt being cracked when I tightened it up, but it was a very large torque.
The price is very reasonable, and the costumer is the strongest.
View detail
I want a choice of sizes.
There used to be a LargeSmall size, but Lineup is gone.
The Size is a little out of sync with the desired area, but I can't help but use it.
I'm looking forward to future lineups.
View detail
Clear!
I took Tandem Footpeg without it when I looked at it from behind.
But.... Because the master cylinder of the rear brake was attached to the Tandem Footpeg, if you take away the Tandem Footpeg, the Master Cylinder has gone into a plunge state.
This is a product that will not happen.
I'm very happy with it.
View detail
Used for other purposes
I'm using short Katanaspec. on my SV650, and I want to change the smoothness of the rear part Buy ⊂ (^) ^)⊃
Two One Side holes and a little space between the rear cowl and the rubber It was
I am satisfied personally (^-^) v
It's not suitable for use, so the rating is low (__) m
View detail
Refreshing！
I just received the Brake tankBracket from Magical Racing that I purchased the other day I installed it
Install this Carbon stay on the part where you removed the Tandem Footpeg
It's a bit of a dress-up, but as a Refreshing, it has a better atmosphere
View detail
Satisfied
Since we don't do Tandem, we have to remove the Tandem Footpegs and remove the Magical I plan to replace it with a CarbonStar from racing
I haven't installed it yet, but the thing is very nice and I'm really looking forward to it
View detail
good good
It's very good. The price is very good. I'll use it often. And also recommended I'll do it. Please take care of me. It was a pleasant shopping trip. ^^ good View detail
More than expected quality (Material : FRP)
I bought it for FaceChange.
It became Production to order as if there was no stock, it took about a month to be shipped.
Material : Since I chose FRP, I thought that it was necessary to paint,
The quality was good as it was not necessary.
I purchased Under Cowl of the same Magical racing here, too,
Both are satisfied with the quality.
Functionality is not a product that can comment.
However, Large Kisano's Material for two palms : Since it is an FRP product, if it is a little cheaper
I think that it is better, but there is no other choice, so can not it be helped?
View detail
Endurance CowlSpec. In!
I use products of Magical racing quite a bit, but Quality as a product is not complaining. Fitting is also good, and this product is convenient for Carbon because price is reasonable and I think that it is easy to change Image.
It is easy to attach because it only installs according to existing Bolt.
However, since it was quite exactly Fitting I thought about putting a protective Tape on the Reverse side, but when I put a protective Tape, it floated and it did not attach firmly.
Recommended for both price and design.
View detail
Material : As a Carbon item, COSPA is good.
It is for gs 1200 ss of Magical racing, but our Motorcycle has diverted Cowl of gs 1200 ss, so I bought it for the purpose of Dress-up. Material : Although Carbon products are high-grade, this is easy to purchase Gold amount and endurance CowlSpec. I like it so much I like it.
Carbon is also beautiful, and the product creation is no problem.
The Bolt hole is perfect and perfect for Dress-up.
View detail
It purchases for vehicles regulation correspondence of APE100. Since it was a general-purpose article, there was uneasiness. Although attachment is a Cable tie, it has no problem as a Sprocket guard. It united with NSR50 and uses also here.
It purchases for vehicles regulation correspondence of APE100. Since it was a general-purpose article, there was uneasiness. Although attachment is a Cable tie, it has no problem as a Sprocket guard. It united with NSR50 and uses also here. View detail