Reviews
Purchased for a Circuit run.
I bought Plain Weave Carbon, the mold with Tank is also good as it fits Exactly.
Less movement of the hips and lower back in Circuit driving and easier in Breaking.
Almost all of my Circuit buddies are installing them!
View detail
Just fit with Exclusive Design
Exclusive Design indeed!
Just fit and installation is a snap with the included double-sided tape.
However, as you can see in the photo, the color of the body color Black is different, but I think this may be due to the lot number of my Motorcycle.
View detail
Items with a dramatically increased sense of hold
The OEM tank end is a gentle line and tends to ride up in front of you when breaking, so I bought this one.
Along with Screen and Rear Fender, this one is also Carbon.
Double-sided tape + Rivet is used for installation, but it can be installed with double-sided tape only.
The hollowed out inside makes the Edge stand up a lot more than the OEM, which increases the sense of hold and dramatically improves control of the lower body.
From STREET to Circuit, you can feel the effect more than enough.
With Edge standing, it becomes Racer's Forme, and it looks good and satisfying.
These are items that will have a different appeal as you run through them.
View detail
Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA2 Helmet50R ABS
I think the product itself is good
I bought Twill Carbon
The item itself is beautiful, and the belly of the Tank is also firmly bar ringed and so is the damage I don't think I'll get it
The reason why I lowered my rating this time is because I looked at the condition of the product before anything else after it arrived was a little more lacking In fact, the sticky tape on the Motorcycle (It was already attached to the inside.) This is the point where the
If you don't mind the lack of it, you won't mind if it's small, but I don't mind it lol
There's only one more item in stock, from the Site, and it stinks, and the waiting and sending back It's a pain in the ass, so I decided it was okay this time
I'm a little disappointed because it's not a cheap purchase
As far as sticky tapes go, I thought I didn't have to put them on anymore
View detail
It's easy to Hold
I was troubled with the Tank Cover of Saigaya, but Tank is covered too much and the part is blue I chose this one because I didn't want to reduce the
It is easy to install and easy to hold
View detail
Footing is perfect and comfortable
[Installation/Quality]
NINJA2 Helmet 50RSL is a bare Gold Tank without a Tank Cover It's a motorcycle, so it can only be installed on the double-sided tape on the back of the product It will be The shape is good and the footing is very good, so you won't have to worry about it peeling off at first, but you can take care of it just in case The double-sided tape was pasted in several more places
The edge of this kind of tank cover may come up from the surface of the tank This product has been installed for several months and has not floated or shifted in any way during that time, no matter how many times it was driven Color:The Unpainted Black is also a beautiful black color, so you can match it with the car without feeling uncomfortable I do
Limit no interference with the OEM Seat, but the gap between the Seat and the bottom of the Cover If you want to use it in combination with Race Cowletc It may be necessary
[Function/feel of use]
The rear end of the tank becomes a raised shape, and the hold of the body at the time of slowing down or hanging on is If you combine it with the non-slip side of the tank and the non-slip Seat Cover, it is easy to use Not to mention the fact that you don't have to rely on your muscles to hold the circuit, which makes it more comfortable for you to hold
[Cost performance]
The FRP Cover may seem expensive at 10,000 yen, but the Tank shape is very easy to ride If you feel it's difficult to hold your body, it's worth a try I think
View detail
look cool and angular
It doesn't look like Carbon because of the bad photo, but it's the light It's just a double-sided tape to attach it to the tank Fit
I can't say for sure since I haven't run it yet, but it should make it easier to beat a motorcycle !
So, for now, I'll give it 3 stars for performance!
Since I chose Carbon for both Mirror and Tank, I wanted to unify the other parts with Carbon measure
View detail
I can run without worrying about it
Material in Knee grip:I bought it because the plastic frosted tank cover became slippery
It's a bit squishy with a certain thickness and elasticity
Because of its thickness, it doesn't have that tightly held feeling, but the hold is solid It's done and it's good enough
View detail
Parenthesis is good ,,, !!
A slight gap with Tank is a little worrisome, but I can not say that the position will not shift so far, it's a nice feeling.
After all Carbon is good!
View detail
Since it was the first Tank-pad purchase, although it wavered, it was made the product made from a reputable Magical racing whether it would be made pure.Is the handle of the sheet outer skin of FAZER8 (2013) also resembled?Since it was not the elegan
Since it was the first Tank-pad purchase, although it wavered, it was made the product made from a reputable Magical racing whether it would be made pure.Is the handle of the sheet outer skin of
FAZER8 (2013) also resembled?Since it was not the elegance only for
, it was not able to attach, without suiting Tank form, but it was processed drastically.The procedure is easy.Pasteboard is cut into the form of the
Tank pad.The
paper pattern is set by a Tank, and an excessive portion is turned up.
(3) An excessive portion is cut.Become symmetrical at this time.
(4) It is checked again whether according to a Tank, it is satisfactory.The paper pattern like the point is set and it cuts into the pasteboard of the double-stick tape of the
Tank pad by a Cutter.Or [ that it is better to cut more shallowly by not cutting at once several times at this time ].A break is shallowly put in in the center of the pasteboard of
double-stick tape.He plans to turn off only the pasteboard to the last.Position doubling is carried out to the
Tank, and one side of pasteboard which put in the break like the point is stuck so that it may not shift removing little by little.In that case, it is good to work carefully so that a joint may not overlap or a crevice may not open.Although front riding was not carried out usually [ ], it is the favor which stuck the Tank pad and the weight shift became possible drastically.
View detail
It attached in order to cancel the last slide of the body under operation. Although the Fitting was a cinch, since that [ one's ] and the double-stick tape which has arrived at the flesh side although it does not understand took immediately weakly, a
It attached in order to cancel the last slide of the body under operation.
Although the
Fitting was a cinch, since that [ one's ] and the double-stick tape which has arrived at the flesh side although it does not understand took immediately weakly, another new Tape was stuck by itself.
Since
one purchased that of FPR, he painted by himself.
After
will be large satisfaction if a price becomes somewhat cheap.
View detail
A mounting arrangement is double-stick tape. Eight places are in a Cowl inner side. It is likely to adhere firmly and does not take simply. It swells quite to a top like the photograph. Does it become [ tic / old / a Replica ]? If pure
A mounting arrangement is double-stick tape.
Eight places are in a Cowl inner side.
It is likely to adhere firmly and does not take simply.
It swells quite to a top like the
photograph.
Does it become [ tic / old / a Replica ]?
If pure, the upper part of the body shifted before at the time of a Brake, the crotch hit, and it was painful, but after using this, it came to support some also by the abdomen.
When a knee Hold is insufficient, will shift and it will hurt its crotch, if the Pants made of
, however a Nylon is worn, but it is an orz
Hard Breaking, of course, the crotch of an outside guide peg fits exactly at the time of Corner penetration.
Thereby, the sense of stability of the upper part of the body increased.
In
black Gel, since paint application is indispensable, a Carbon type is purchased.
Appearance also became a Race ish.
It compares with the price of
, however the Carbon of the other company, or becomes, and a difficulty is high.
this one -- merit [ a feeling of a Hold ] -- although it thought that that was right, suit me -- it cut.
View detail