Reviews
Too much shaking bothers me.
The Fender Eliminator is also long, so it swings vertically over bumps and other obstacles.
All those who have seen it for the first time say they are worried about the sturdiness of Large's installation if they look at it from the back.
A friend of mine who bought the same one said he got tired of it and decided to go with a different Manufacturer.
To be honest, I don't really recommend it.
View detail
Wheel replacement is ….
Chain cannot be bent when removing and replacing the wheel.
Suggestions for improvement.
View detail
I was so happy that it arrived at the right time.
I'm so glad it arrived on the exact date.
The product was also perfectly packaged and in good condition, so it was flawless.
I would like to recommend it because I was very satisfied with the time I spent waiting.
If you're bored with your bike, it's worth investing in.
I ordered several products, but this was the easiest to install and the best quality.
There were no cracks in the carbon, and even the bolt washers were carefully taken care of, so it was very easy to assemble. -------------------------------------------------- -------- I'm so glad it arrived on the exact date. The product was also perfectly packaged and in good condition, so it was flawless. I would like to recommend it because I was very satisfied with the time I spent waiting. If you're bored with your bike, it's worth investing in. I ordered several products, but this was the easiest to install and the best quality. There were no cracks in the carbon, and even the bolt washers were carefully taken care of, so it was very easy to assemble. Powered by Google Translator
View detail
Magical Rear Fender CBR600RR
The installation position is Exactly, high quality, and I am satisfied with it. View detail
Exactly for the 2024 model year.
I didn't know what year it would fit, so I took a chance and bought it, but the ExactlySize fits! View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Tie Wrap Fixing is too sad.
The product itself is well Large body Large sturdy.
It is too bad that it is planned from the beginning to just stop at Tie Wrap.
If you use double-sided tape, it will be a hassle later, and the Tie Wrap itself has to be very long. (It is included in the product, but the quantity:2pc only)
In case of OEM Exhaust System, it is better to remove only Silencer. It will be a huge obstacle. It may be possible to put it on without removing it, but you don't want to get scratches all over it. It can be removed with 3 Bolts on one side. After all, it is faster and easier.
I didn't understand what the Instruction Manual was saying for a while because it was just text.
If you know what I mean. Manufacturer doesn't want to take care of anything." I think it says "I'm sorry, but I'm not sure. After all, there is no reference to the installation itself. I wonder what is this Manufacturer….
View detail
Scratch regrets
Delivery and packaging were good, but there were scratches on the product.
Until exchange request
But my effort and time
It's a shame.
People around me said it was a good brand, so I ordered it, but I was very disappointed.
Perhaps because it was an in-stock product, additional products were ordered.
I hope the product is in good condition. -------------------------------------------------- -------- Delivery and packaging status was good, but the scratch of the product Until application But my efforts and time It's a waste. I ordered it because it was a good brand around, but I was disappointed. The additional product ordered is because it is inventory. I look forward to the good product condition. Powered by Google Translator
View detail
Well worth the price!
I purchased the OEM inner fender because it is short and the Seat back and Rear suspension are very dirty.
If it is long enough, it doesn't have to be Carbon, but even if it is not Carbon, it is quite expensive, so I decided to go with Carbon.
Replacement is easy, but the push rivet screw on the back of the swing arm must be removed carefully because it is reusable. Push the middle part. It is possible to replace the Swing Arm without removing the Tire.
I drove a little on a wet road, Inner fender effect Large.
It was a good purchase and I thought Parenthesis looked great when I put it on.
View detail
Light weight, slim type Fender.
[How is it used?
Introduced with the aim of reducing the weight and slimming down the shape of the Front Fender.
Was the one you received as per Image?
The design is good and the quality is good. The carbon is a little thin in some areas, but this contributes to the lightness of the product.
Was the installation difficult?
It is easier but better to remove the front tire and work on it.
How was your experience with it?
Design is good as per Image.
[Included Parts:were they on?
Kit only for installation.
[Was there anything that disappointed you?
Compared to Striker's Chain Cover, I felt the carbon was a little thin, but I don't think this is a problem. I think it's fine,
View detail
Fender Eliminator Kit for ZX-10R 2016
This product is marked for 2016, but can be used for 2019 models after Minor without problems.
I was looking for a Fender Eliminator Kit that looked somewhat nice in shape and chose this product. It was a bit chunkier than I expected and not as stylish as I wanted it to be, but I am generally satisfied with it. LOL!
This product is available in Black Gel and Carbon etc. Variations are available, but I do not like Carbon very much, so I purchased Black Gel and finished it with Matte Black, a two-component urethane paint. After all, Material:Because it is an FRP product, it was distorted and a little difficult to install.
The Fender Eliminator KitBody has φ6.5 holes in the mounting area, but if you want to put the License Plate and Blinker straight back, the clearance of the holes is not enough. I re-drilled all the holes with φ8 and adjusted them as I went along.
But the above processing is just processing because I am a nervous wreck. If you don't mind, you won't mind at all.
View detail
To!
Plain weave is better Parenthesis than twill weave!
I used to be obsessed with twill weave, but plain weave was cheaper than twill weave, so I ordered plain weave on the spur of the moment and discovered the advantages of plain weave… lol
View detail
It was just as Image.
It was as per Image but … installation was difficult.
I have a hard time installing the Right Side, especially as per other comments.
The back of the Right Side interfered and I really did not want to cut it off, so I used a Spacer collar and managed to install it.
If scraped off, maybe Quantity:Pair (for Left and Right) I think the symmetry will not match. We have to temporarily install it and consider the thickness of the Spacer collar.
Quantity thanks to Spacer collar:Pair (for Left and Right) Symmetry is not a problem!
It rained during the Touring and it worked well to keep rainwater and mud out. My friend who was running behind me also wanted one.
View detail
We're doing it right.
Installed on MT09SP2022.
It is clear that the product was made with thought and consideration for Wiring and Hose.
It is longer in the back than OEM, and the front mounting area has less clearance than OEM, so it can be recommended for those who are concerned about stepping stones.
(However, the Swing Arm still has a Small stone on it.)
Clearance with Tire is also Exactly, so you should not expect to be able to Size up.
View detail
For those who want to make inner fender look cool...
When we converted to Fender Eliminator, the OEM Rear Fender splashed a lot of mud, so we purchased this product, which was extended from the OEM Shape.
I ordered Black Gel because I wanted to put Sticker on my Fender and I thought it would be unnatural to use Carbon only here.
It looks great, cool !!!! I thought, "Wow!
But as to whether the mud splash was reduced, well, as you can see from the length, it didn't change much (lol).
My car is equipped with a rear box, so my back is protected there, but if you have a box-less type, I recommend the OEMFender.
However, I think I can recommend Inner fender to those who have the sensitivity to think it is cool with an extension!
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It came with a '23 GSX1300R HAYABUSA.
It may be a little expensive, but the product was well made.
The Tie Wrap fastening is a little minus point.
Otherwise, I'm happy with it
View detail
Good quality workmanship
Received it earlier than expected. Product is of good quality. I modified the signal routing to hide them as much as possible. Product weighs almost 1kg lighter than OEM. Webike is a trustable platform for your orders, especially for long lead items. View detail
Bold & Strong Design, Some Fitting Difficulties
This fender is both futuristic and retro in dark Bladerunner style! Flawless twill weave carbon construction is stiff and very strong, while saving 0.5 pounds from the unattractive oem fender. Installation was a little more tricky -- I had to slightly ovalize the fender's mounting holes to prevent cross-threading the screws. If you have ANY trouble starting the screws, STOP and use a small hand file to expand the holes slightly. Take your time here to do a good job, and you will succeed. I give 5 stars on design concept and beautiful quality of carbon twill, 3 stars for some problems when installing. Web!ke Japan, you impress me so much! 43 hours from placing order to opening the box in my garage in California! You set the highest standards, keep up the great job. View detail
I had a hard time buying it.
The OEM fender was removed and the Carbon fender was simply fixed with the 6 Bolts provided. I painted the screw lock just in case.
There were some disappointments in the finish of the product, but I don't mind a little bit because there is always something wrong with Magical racing's Carbon products.
It is not yet running, so I will test it this weekend.
View detail
It will crack.
I have made my first run after installation.
It is about 240 km on highways, mountain passes, and urban areas.
The wobble was large from the time of installation, and I was concerned about the strength of the product,
When I came home, I checked and found that Crack was there.
I am very disappointed because I like the position of the number, the texture of the carbon and the design.
If a lighter reflector is used without a license frame, it may be different, but a reflector made of gold would be a safe bet.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Magical racing
Solidly built.
Large I'm satisfied.
View detail