Reviews
![[TCW: The Craftsman's Workshop] Fender Eliminator Kit](https://global.webike-cdn.net/photo/impression/01/0177cb273c4b1579a222f2a196963cfaL.jpg)
Fits: HONDA REBEL250, HONDA Rebel300
A defective product has been delivered.
When I ordered, the delivery time was supposed to be 3 months, but it was delivered in 1 month.
I'm happy for the quickness, but I want to know what the production control is like at the manufacturer (laughs)
Personally, I think the 20 year MODEL is basically a Matte paint job and a glossy Black paint job would not fit.
I painted it Matte Black with my own paint and then installed it.
To be frank, without painting at the factory, Color:I would appreciate it if I could get it cheaper at Unpainted.
There is no problem at all in the design and the installation shape, and after installation, the presence of the Rear tire has become a major problem, and I am satisfied with myself that the parenthesis has become better.
And here's the Large problem.
I received a defective Extension Harness that came with this product that is completely useless! (Angry)
Of the 3 wirings of the Tail lamp, 1 pc was delivered without Bullet Terminal terminal treatment.
(I installed the terminal myself.)
The biggest problem is the wrong wiring on the Coupler side! (Angry)
If you connect and test the same color Bullet Terminal according to the Instruction Manual...
Only the two Right shots of the License Plate Light will light up, and they all go out when you hold the Brake...
I was so distressed and impatient, wondering if I had screwed something up when I couldn't return it! (Angry)
Because it is not possible to return it, I hope that it is a color scheme mistake of the Coupler part, and it is the state of the photograph attached to some pictures that it came to be able to use it by reconnecting Bullet Terminal fearfully.
Quantity:If it's a mistake, it's still understandable, but...
What do you mean all three are completely different!
I'm not going to complain directly because it seems like the company doesn't accept returns or complaints once they've painted, processed, etc.
(A note was included in the delivered box.)
How do you deal with obviously defective products such as this one?
I wonder if they will continue to manufacture and sell products with the same mistakes in the future?
Unlike the cheap Chinese and Asian products, I paid quite a bit of Gold for it and I'm not happy with it (angry).
View detail
Full marks for texture.
Material:I replaced Plastic's poor Rear Fender to make it look better.
There is no effect. It just made me look good.
The price is high and the improvement in texture is excellent.
View detail
It's a bit long for a Fender Eliminator.
The Fender Eliminator looks neat when there is a Reflector under the Number and the Number is close to the body, but this product is a Type that installs a wide OEM Reflector on the Number.
It was a little different from the neatness of the Fender Eliminator that I was expecting.
View detail
Carbon is good!
Magical racing is very accurate and easy to install. Also the carbon is folded beautifully. [Color] It has a Clear paint job and looks great. I had no complaints.
I didn't need to re-drill any holes because of the high accuracy of the installation. However, it is easy to lick the screw mountain of the OEM push rivet when changing. I licked one place. Also, the exhaust system is in the way, so you might want to remove it.
View detail
The shape is nice but…
The Chain Guard is slanted and the rub flies all over the back of the Fender, especially after Chain shiko.
It's a bit of a waste… because the shape is so good.
The price is also a bit high, so be careful when considering it!
View detail
No question, it's cool?
It was on a SEA BASS 250sb that I bought used with 18,000? miles on it.
It was Refreshing and Stylish with a Large difference from NORMAL's flat and unrefined Fender.
Definitely good looking?
The best part about buying a used car is that you can pass on the love of the previous owner!
View detail
MagicalFender Eliminator for ADV
The Bolt that comes with it is too long to use.
It does not come with a Bolt for mounting the License Plate Light.
It's unfriendly because you have to procure Boltetc. by yourself for the above matter and there is no description of it.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA VFR800
Surprised to see which way you want to go …
After four months of waiting, it finally arrived.
But when you start installing it, the hole to knock the Screw down is in a completely different place.
View detail
Fits: YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA MT03, YAMAHA YZF-R3
I don't know.
I've been waiting for 4 months, I've emailed them twice and they've stonewalled me. Of course I asked them to pay for the second one on delivery. View detail
Accuracy, perfect?
Carbon parts, precision is a big deal. For two-wheelers with high vibration, a precision gap can cause distortion and cracking, and carbon parts are very large in terms of installation accuracy and tightness. View detail
It's not bad.
The black FRP (or CFRP) with silver cap bolts is a little different.
It's also uncomfortable to put FRP between the flat washer and the Swing Arm mounting point (or the included bracket). It is recommended to use screw locker because it might come off due to vibration, but it is not possible to tighten strongly. The position of the hole is generally right, but it takes a little bit of force to fix it, so it will break sooner or later.
By the way, I ordered on July 2, and it was announced that it would be shipped around September 9 with a delivery date of 2 months, and I received an apology for the delivery delay on September 10, and it arrived at my hand on October 1. Although I ordered in anticipation of the schedule by the item of returnable cancellation not allowed, it was unexpected that I could not meet the delivery date of two months ahead.
View detail
Can't you at least meet the deadline two months in advance?
I ordered it at the beginning of July and it was supposed to ship on September 9. I'm late. And
webike contacted us to apologize and say that they were in the process of contacting us for the details, but it was a non-cancellation item and it took two months to deliver, with no explanation as to why. I'm late. I'm not sure how to take the attitude that it's just a matter of
I was favorable to Magical racing, but at once I became skeptical.
View detail
It tightens up around the rear.
I installed it because I was worried about the gap between the rear tire and the rear suspension area and because I've always liked inner fenders.
It was easy to use between the Tire and the Fender, as well as space to wind the Tire warmer. On the contrary, there may be a person who is worried about the space between Tire and Fender.
The installation was accurate and easy to install, but there is one complaint that I have to fix the front Right side with the in-hemp palm of the palm, which is a little bit bad for parenthesis.
I don't know if there are no fixing points with Bolt. There were no other complaints, and Parenthesis became better.
View detail
It's nice
A member that Honda forgot to put on.
I bought it to protect the rear suspension. I also bought the Chain Guard to protect the rear suspension.
Material:I like Carbon Style. it is easy to install.
View detail
Fits: HONDA CBR600F, HONDA CB1300 SF, HONDA CBR900RRFire blade, HONDA CBR600RR, HONDA CB400SF, HONDA CBR600F, HONDA CB400SF
The MotoGP-look Carbon Front Fender
2003 (PC37 first semester) Mounted on a reverse car.
Carbon Trim Screen, Rear Fender, Tank end and then Front Fender to Carbon.
The shape is designed with the Machine of MotoGP in mind, and it can be installed on the upright fork of various models of cars by attaching the bracket of Aluminum.
It's more Racers-like with a shape that covers the whole thing than OEMs.
It looks great, but it's also quite light, and it saves weight. (Not sure if you can feel it.)
I think the Carbon's presence in the suspension will tighten up the look and feel of the Racer.
View detail
Twill Carbon to tighten up your feet
2003 (PC37 first semester) Installed on a reimported car.
It is longer than the OEM Rear Fender to protect the rear suspension from mud splashes. The shape of the shape is like a curve with a sharp center, which makes the look of the race ish more distinct.
FRP (White、Black) There is also a Twill Carbon, but I chose the Twill Carbon.
"Magical I was enthralled just by looking at it. This is the magic of Carbon.
View detail
Mostly as expected.
I don't even plan to put Carbon Style Parts on the Custom from this one. I didn't think it would be possible to get parenthesis even if only the rear fender was Carbon. I bought the Black Gel one. It was rather easy to install, but it interfered with the mudguard at the back of the suspension as mentioned in the other implements. There were only two screws on the reverse side. So it is not difficult to process.
The look after you put it on is really what you expect, Parenthesis better!
However, I think the maintainability after installation is poor. LOL!
Every time I had to remove the Chain Guard and maintain the Chain every time. The thought of doing this work was a bit daunting.
Overall, I'm happy with it.
View detail
I wanted to extend the inner fender
When I was searching for Parts to see if there was anything to be done about the mud splashes, I found the OEM Inner There was a thing that can be extended by adding it to the fender, but it is possible to replace the whole thing I went with Magical racing's Rear Fender, which is further extended
Dare to use Material instead of Carbon:I used FRP
I wish I could have extended the Fender, and I didn't want to use Carbon to get each part together
I decided to go with FRP because it's a safe place in terms of price
To install, just remove the OEM Fender and re-fasten it with the included bolts
But the front Center of the OEMFender is staying in PlasticRivet? But the product didn't have the holes, so I wondered if I should drill them myself I installed the Rivet with the back holes plugged up
Since the Instruction Manual doesn't specifically mention the Rivet, what I'm not sure if the
Anyway, I'm happy with the way it looks and the mudguard performance
View detail
Protecting the VTR250 suspension
I replaced the OEM suspension with an OHLINS suspension, so the LINK part of the suspension I couldn't allow the mud to cover me directly It was unforgivable to the generation that knew the Honda OverQuality of the Showa era MotorcycleHondaQuality's design degradation was astonishing, but as a countermeasure to this Purchasing a Rear Fender from Magical Racing to deal with UserLevel This product is a manufacturer's fill-in-the-blank product This product is to fill in the gaps in the manufacturer's product line However, as you can see in the picture, the measures against the mud are not enough, so I made it myself and put it on the slit part of the Fender Rubber was installed with Butyl foliage tape for water resistant roads The function will be confirmed at a later date View detail
Design is good!
Implants are another driving change! There's no such thing as a "good
I just changed the Rear Fender, so it's no surprise
It was able to be installed without any problems such as the position of the holes But the place to fasten with 6M/M Bolt is too long
I couldn't squeeze it in; I used the OEM Bolt
No distortions, and I'm satisfied with the installation
When I removed the Rear Fender, I removed the Rear Carrier
I'm self-satisfied with how much better it looks, I wish they'd put another Sticker on it What?
Also, I wish it was a little cheaper
View detail