Reviews
Rear Fender
It is longer in the back than the OEM Rear Fender to prevent dirt around the Rear suspension.
It's carbon, so it looks good.
It is also well made.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It'll be on the Model 3.
Installed on a Type 3 GSX1300R HAYABUSA.
In the OEM state, there was no rear inner fender, and there was a lot of mud splashing inside the rear suspension and fender, so it was strange to wash the car.
So, I bought this Inner fender for the Type 2, after seeing an impression that it could be pimped for the Type 3.
I was able to use Exactly to add the Bolt position and so on.
It's a shame that the Swing Arm and Tie Band fasteners are not included in the product.
I'm not sure how effective it is, but the integrated chain guard is now larger, so I think there is less chain oil on the swing arm and rear wheel.
Well, it could just be that the mileage has increased and the chain oil has decreased, but I think so.
View detail
Good build quality.
It is made by Magical racing, and the texture is excellent.
The delivery time was also much faster than expected when I ordered.
The front tire must be removed to remove the OEM and install this product, so the front stand is required.
The installation itself is easy, but the hurdle may be a bit high there.
Removing and installing the front tire and caliper is a safety issue, so I also need to manage the torque … I need a torque wrench … I had the tools, and a friend who is an experienced mechanic helped me put them on.
I was missing two Mounting Bolts, so I contacted the Manufacturer and they sent them right away.
View detail
Tighten up around the rear
[How is it used?
Installed on MyMotorcycle
Was the one you received as per Image?
As per Image
Was the installation difficult?
It might be safer to adjust the mounting holes for the Right SideFront. I felt.
How was your experience with it?
It prevents rainwater and mud from splashing up, so I felt that this is a must-have item for vehicles that have been converted to Fender Eliminator.
[Included Parts:were they on?
Comes with Manufacturer's LogoDecal
[Was there anything that disappointed you?
Because the product is so good, I thought it was a pity that the position of the Bolt hole on the front side of Right is a little Gap.
Other items that would be helpful
Because only the RightFront part is a weak point as there is in the Review of the other person, when it is constructed as it is, in order to have difficulty in the installation of the collar, I thought that it was a good idea to fix it temporarily with Double-sided Tape etc.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It's not here yet.
It's my fault for not looking closely enough.
I can't cancel it.
He's supposed to be here in January.
even if one were to come
I don't want it.
View detail
A really nice item!
It arrived after a long order period but Webike kept me informed and also offered me the chance to cancel the order if I did not want to wait. I am glad I waited. Fitting was easy as the four mounting holes lined up perfectly. This is impressive as most aftermarket items need a little help to make them fit. Quality of the item is good although there are two "swirl" marks but they are hardly visable. Very happy with my purchase. View detail
Overall, beautiful construction and accuracy.
The quality and accuracy of the product is excellent.
Just a hole in the Bolt
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
An impulse buy that I found by accident at the supply store.
The next day, I went on a 500km touring on the highway, down the road, and on the mountain road, and I checked how much mud was on it. Well, the main effect is the appearance. Delivery time is quite long, so it is recommended to order during the winter off-season and install before the spring touring! View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
You can install it even if it doesn't fit!
Webike's conforming question is "I can not place an order" But I asked Magical racing's sales person about it. "The Frame and Swing Arm are still in place, and the Brake line is unknown, but 80% of it is attachable." So I ordered it! I was able to install it, and Webike's reply was the worst! Anyone can do it. If you are dealing with the product, you should do some research and ask the manufacturer if you don't know.
Installation is as per the Instruction Manual, just pop it on! It's not difficult. The fixing holes are the same.
View detail
Magical Racing Front Fan
The quality of the medical racing products is quite good. The front fender has a different design from the genuine one... It is quite pretty and luxurious. I'll have to bear with it..^^ ----------------------------------------------------- --------------- The quill teeth are quite good for Maddy Cultacing products. The front fender is different from genuine and design ... It is quite pretty and luxurious. If you do not have a price and product stock, it is a disadvantage that it is a disadvantage, but to buy a good product I have to take it. View detail
MagicalFender Installation
The mounting holes didn't fit, so I had to cut them with File.
No matter how I put it on, the gap between Tire and Fender is too wide, so Parenthesis is bad.
View detail
motoGP Look Front Fender
Installed on a GSX-R1000R 2019.
It's a product that has a functional feature that can protect the Inner Tube of Front fork, but I bought it almost for the purpose of appearance in order to approach the shape of motoGP style.
So I'm generally happy with how it looks, it's just like the picture! (Lol)
Photo
The shape of the front fork is good like motoGP.
You can dress your GSX-RR with your favorite Decal with reference to GSX-RR.
Because the clearance with the front fork is quite aggressive when actually installing it, is it the point of the famous place Manufacturer that it is established in this clearance?
The surface finish is not dirty by any means, but it is slightly yuzu-skin-like, and for the high price, it was ”not that bad”Level.
Before the work, I thought it was just a fender replacement, but in the case of GSX-R1000R, there is a part where the fender is fixed from inside, so the fender cannot be replaced without removing the wheel.
If there is no way to float the front wheel, such as STAND on the front, you will inevitably have to ask the shop to do the work.
You can also use the attached small Aluminum Bracket for installation.
You can't see it once it's installed, so it's not a problem, but you need to be careful about the mounting angle of the Fender because this Bracket doesn't have any positioning.
The screw is cut directly on this bracket, but the thickness of the board is thin and the screw is shallow, so I think it is better to use a medium strength screw lock.
It is the protection function of Inner Tube of this product, but it seems to be effective to some extent from the dirt condition.
However, if you look at the product photos, you can see that the stepping stones from the outside are guarded, but the inside (Wheel side) is no Guard, so it's not perfect.
However, OEMs are better than that because they are no Guard, inside or out.
Also, because the Inner Tube is covered, maintenance such as wiping and checking for oil seepage is rather reduced.
(Personally.) In layman's terms, it was introduced for appearance purposes, so its purpose was fulfilled when it was attached.
However, when installing on the GSX-R1000R, please note that the hurdle is higher than the standard Fender replacement due to the circumstances on the motorcycle side.
View detail
Accuracy is low and Carbon is dirty.
The design is good, but the quality control is terrible. I had to return it three times before I finally received a product that was a good compromise. After 3 returns, I finally received a product that was a good compromise. I bought a front fender to go with it, but it interfered with the front fork and scratched the motorcycle body. I think that I will not buy the product of Magical racing again while thinking that every manufacturer is such a thing. I paid a lot of money for this product and I feel like my car was damaged. View detail
Magical racing
The product is well made, but the Double-sided Tape and Tie Wrap Fixing is not good for any Large model. Tie Wrap looks so cheap! View detail
Rear Fender。
Parenthesis pretty much got better.
I have a 20 year old zZX14RHG and I was able to install it without any modification.
View detail
Modification is required for late 14R. The product is highly satisfactory.
I installed this on my 2020 High-Grade.
If you have a 2016 or later model, the brake hoseBracket has been reshaped, so some modification is required.
Whether Carbon or FRP, it is still resin and can be easily cut with File.
(1) The mounting hole in front of the Right is slightly enlarged to match the actual size.
It is possible to attach the bracket with this method, but it is best to cut or shave 3mm off the bottom of the bracket if possible.
(2) The instructions say to put the Bracket behind the Right under the Fender, but it's too thick to fit.
Cut the inner side of the rear end by 3 to 5mm to match the actual one.
This way, the inner fold of the hose clamp will not interfere with the fender and the bracket can be fixed from the top.
Please refer to the picture.
It was easy to install if it was installed in the order of Right front, Right rear, and Left two places.
I had a hard time installing it but the overall finish is solid and great.
Fender is also deeper and mud splashes will be reduced to Large width.
It would be good if the instruction manual is updated as a way to support the 2016 and later models.
View detail
I need better packaging.
[How is it used?
Dress-upCustom
Was the one you received as per Image?
Yes
Was the installation difficult?
It's Bolt On, so even beginners can do it.
How was your experience with it?
Satisfied as a Dress-up
[Included Parts:were they on?
Instruction Manual and parts were included properly.
[Was there anything that disappointed you?
The product was cracked or chipped.
As soon as I received the product, I checked it and found cracks and chips in the product.
I'm not certain if they packed the item broken or if it was broken during delivery, but I would like to see them pack it a little better.
I thought about returning it, but gave up because it seemed like a long time to return it and a long time to get a new one.
The product only said it would fit up to a 16 year model, but I was able to install it on a 20 year model I own.
View detail
CB1000R Magical Racing Rear Hugger
I received it after a long wait due to the long production period, but it is pretty and luxurious enough to compensate for the wait. The swingarm chain cover rear hugger is made of a barrel, so it has a sense of unity and is luxurious. If you are hesitating to purchase, please buy it. ------------------------------------------------------------ -------- The production period was long, so I received it after a long wait, but it is pretty and luxurious enough to compensate for the wait. The swing arm chain cover rear hugger is made of barrel, so it has a sense of unity and is luxurious.. If you are hesitant to purchase, be sure to purchase it. Powered by Google Translator View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX)
magical Racing Carbon
It used to be A-TECH Carbon fender, but I got tired of it, so I changed to magical RacingCarbon.
I think this one has a better design.
Could A-Tech possibly be on the 10r? I just thought of that when I wrote that.
View detail
Very good.
Fitting, I think the texture is good. I don't know how effective it is, but I guess it's better than nothing. View detail