Reviews
Under Cowl
We have installed YOSHIMURAmachine bendedFull Exhaust System. I installed it temporarily and found no particular interference, so I painted it and installed it. I was very lucky because I was prepared for the modification. It's nice to have a different atmosphere. View detail
YZF-R25 is normal with this attached.
I have been painting cars for over 10 years, so I painted the Black Gel one myself. If you ask a store to paint it, I think it will cost you a fair amount of money, so I think Carbon is a good choice for normal people. I was more impressed with this than buying an exhaust system. It looks really cool! The only thing I am sad about it is that the Wound is easily scratched by stepping stones. View detail
It arrived a month early... but maybe I had high expectations...
Of all the Magical Racing products, this was the most expensive one I bought and had the highest expectations...
I really liked the room side tape inside and lots of cushioning products.
However, when assembling, the bolt holes did not line up, so I had to do some machining.
I'm so scared of taking the under cowl off again.
It may not fit as well as the original cowl, but
A few of the bolt holes were misaligned, so there was a situation where the carbon broke into small pieces during processing, but it was still too far to replace it, so I just used it.
It's not as good as a homemade cowl, but it's a product that requires some processing ㅠㅠ ------------------------------------- --------------------- Of all the Magical Racing products, it was the most expensive and had the highest expectations... I really liked the room side tape inside and Lots of cushioning products. However, when assembling, the bolt holes did not line up, so I had to do some machining. I'm so scared of taking the under cowl off again. It may not fit as well as the original cowl, but A few of the bolt holes were misaligned, so there was a situation where the carbon broke into small pieces during processing, but it was still too far to replace it, so I just used it. It's not as good as a homemade cowl, but it's a product that requires some processing. Powered by Google Translator
View detail
I like Carbon!
Originally purchased as a connection until the 24 MODEL colors were released.
Still, I liked the sense of unity with the other Carbon parts.
View detail
Fits: KAWASAKI NINJA2 Helmet50R ABS, KAWASAKI NINJA400 (2014-)
Received
It lacks the instructions to install it and some necessary bolts or at least a guide with the details of the installation and everything necessary View detail
Under cowl
the undercowl arrived on time, it was easy to install and was a perfect fit to the bike. The picture says it all. see for yourself. View detail
Processing required
Installation is by a single Screw in front of the OEM Under Cowl and double-sided tape on the SIDE.
ExactlyDouble-sided tape does not feel like it sticks, so I drilled a hole and used Tie Wrap to hold it in place.
It was like we had to do something creative to stop it.
View detail
V-max 1700 under cowl(Twill Carbon)
I ordered it on June 25th... I received a reply that the expected delivery date was October, but I received it approximately 5 months later. Unfortunately, the customs clearance process was complicated, resulting in additional costs and additional freight charges. View detail
Premium Quality
High quality belly pan. Arrived with poor paintjob likely due to old stock, had to sent it for spraying, which worked fine as i wanted a custom design anyways. The brackets provided are high quality as well. Do note for Spec III, mainstand can't be used with bellypan installed, need it removed then you're able to use the mainstand. View detail
Under Cowl Impressions
The finish was exactly as I had expected. Installation was easy. View detail
Not bad...
Very expensive but at least good quality. Delivery is fast thought. Happy with the purchase. View detail
Mounting Large Change
I had a bad feeling about this because there was a hole in the corrugated ball when it arrived, but as I expected, the packaging was not good enough and the corner of the cowl had made a hole in the corrugated ball. I decided to return it and use it as it was since there seemed to be no replacement for it.
I thought 30 minutes to an hour would be enough for installation, but I struggled because the Bolt holes did not fit.
The right side of the washer was fine, but the left side could not be installed due to the thickness of the nylon washer, so it was installed without the washer.
There is a slight gap in the cowl of the car body that is not ExactlyFit, although it may be an individual difference.
ParenthesisIt was a little disappointing because it is a good Part.
View detail
The product is even better than I imagined.
I bought it on the assumption that it would be painted, but I thought there was no need to paint it. I bought it with the assumption that it would be painted, but I thought there was no need to paint it, so I installed it as it was. View detail
If you have changed to an external exhaust system, modification is required.
Cut the parts that interfere with the exhaust system because it is an external exhaust system.
Painted to match the car body.
I think Parenthesis has improved considerably.
View detail
Equipped with undercowl
Installed on a 2023 model year vehicle.
There is no major difficulty in installation, and it is a product that can be installed by yourself.
However, the 23-year model has a different muffler line from the 18-year model.
A little processing is required for the new model.
If you process a little bit on both sides of the front part of the meni side, it will be installed enough. -------------------------------------------------- -------- It was installed in the 2023 car. It is a product that can be mounted enough by self-confidence because it does not have much difficulty when installed. However, in the 23rd year, the muffler line is different from the 18-year model. The new model requires a little processing. If you process both sides of the front of the mani, it will be installed enough. Powered by Google Translator
View detail
That was a good purchase (Polish) v
Before and after installation, it looks totally different Motorcycle! It looks much cooler now. (*^^^^*) View detail
I feel good
Was the one you received as per Image?
It is not too Large and is on Image.
The black gel was fine, but we wanted a sense of unity, so we painted it to match the color of the car body.
Was the installation difficult?
Installation was easy and did not interfere with the OEM Engine Guard.
It is the last model of NC42, but the Bracket interferes with the Sprocket cover when I try to fix it in a good position, so I replaced it with a Posh Sprocket cover.
The MORIWAKI Short Tube interferes with the Under Cowl, so I had to shave a little off the tube and there is no space on the underside, so I put a heat resistant Felt from Magical racing.
How was your experience with it?
Low, so be careful when cornering with steps.
Although it is unavoidable due to the structure, stones and other debris rolled up by the front wheels accumulate.
[Included Parts:were they on?
I have attached it.
[Was there anything that disappointed you?
nothing in particular
View detail
I'm satisfied with the product because it's good, but isn't the price too high?
I bought the inner panel Carbon because only Magical is available. The installation is easy and the parenthesis is good, but I wish the price would be around 40,000 yen for the size of the parts. I think the price is very expensive to be honest. View detail
Quite a hassle to install.
Additional Impressions.
I referred to First's impressions and the installation was a little Large strange as described.
Instruction Manual is clunky and unfriendly!
It is explained that it can be installed without removing the cowl, but it is very difficult to do so without removing the cowl! I'd say it's impossible!
If you don't modify the position of the bracket, there will be a gap if you attach it as it is!
It says "Magic tape included" but it's not. You have to remove it from OEM and transfer it!
It looks like the Instruction Manual doesn't add Rubber molds, SpongeCushion, etc., but if you're interested, there's nothing in there, so you'll have to remove it from the OEM and relocate it successfully!
It's just a mess, made of carbon after molding! Clearance, Included Parts:, and so on!
Please install it with the assumption that it will be modified! Magical thinks that (Lol)
Installation was not difficult, but to be honest, it was quite tedious.
View detail
Bolt position did not match and could not be installed without some modification.
Additional Impressions.
I read in other reviews that it can be installed with just one bolt, but I'm not sure if mine is an individual unit or not, but I had to modify the position of the bracket in the image to shift it, otherwise the bolt position would not be correct and I could not install it.
Anyway, as for the Magical, there are many things that cannot be easily installed, such as some kind of modification, gaps, or strange clearances!
On the contrary, it is poorly made! And too expensive!
Mr. Magical! Please take a good look at your impressions and feedback and make a good product!
View detail