Reviews
Quite a hassle to install.
Additional Impressions.
I referred to First's impressions and the installation was a little Large strange as described.
Instruction Manual is clunky and unfriendly!
It is explained that it can be installed without removing the cowl, but it is very difficult to do so without removing the cowl! I'd say it's impossible!
If you don't modify the position of the bracket, there will be a gap if you attach it as it is!
It says "Magic tape included" but it's not. You have to remove it from OEM and transfer it!
It looks like the Instruction Manual doesn't add Rubber molds, SpongeCushion, etc., but if you're interested, there's nothing in there, so you'll have to remove it from the OEM and relocate it successfully!
It's just a mess, made of carbon after molding! Clearance, Included Parts:, and so on!
Please install it with the assumption that it will be modified! Magical thinks that (Lol)
Installation was not difficult, but to be honest, it was quite tedious.
View detail
It's too bad it's so expensive and so poorly made.
The back of Carbon was sketchy. (Lol) If you look through the light from the back, you can see that the back is crudely made.
Magical and K Labor are not trustworthy these days because of their high prices and poor workmanship.
It would be nice if other manufacturers had parts, but most of the GSX1300R HAYABUSA's carbon is from two companies, so there is no choice.
It looks good, but I wish the price would be lower if it is made this bewilderingly messy.
View detail
It takes time to deliver.
The installation does not fall off if it is fixed at two places with the attached collar and Bolt. although it has become Spec. to be used together with Double-sided Tape, when I think of taking off Cowl by Oil exchange, etc., I fixed it only with Bolt because it becomes to peel off Tape every time, but there seems to be no problem. If you are worried about it, I think it is enough if you assist with something like Magic fastener. I hope that the manufacturer can respond to this area. The smell of Resin comes up by heat, is Racing cowl such a thing? I was a little concerned about this.
The other drawback was that it took 4 months to deliver. If you count backwards, you might want to allow for January.
That's part of the satisfaction.
View detail
It looks nice
CB400SB (NC42) Painted to Red and fitted.
Instruction Manual Exactly attached to places as raw.
STANDetc. No interference at all, accuracy is no problem.
It functions as Oil receiving without problem.
..., but the body touches the ground before the Full bank floating and falls over.
It will not be used as it is at Circuit and Pass.
I get in touch with a little Gap on the street ride.
CB400SB (Or SF) It is that the design of itself is not a premise to wear an Under Cowl.
Sorry for the high degree of perfection in appearance.
Since it can not be helped, it shifted considerably in the front direction and it stopped with Tie Wrap.
While this is grounding the Under Cowl CHALYCHALY, you can do a full bank up to the extent of footpeg rubbing.
It seems like people in a riding way that does not let you bank in appearance is good.
View detail
The undercowl has no complain and since the rubber of the stay non-slip was attached, the silicon spray is sprinkled on the rubber surface and a frame when attaching double-stick tape, cutting in a half and attaching to a total of eight-place attachment f
The undercowl has no complain and since the rubber of the stay non-slip was attached, the silicon spray is sprinkled on the rubber surface and a frame when attaching double-stick tape, cutting in a half and attaching to a total of eight-place attachment frame to a stay inner side, it is easy to decide a position. It sprays to a stay inner side and a frame (a temporary stop) and the cowl attached so that there may be no gap in a cowl and stay (it fasthens strongly) and the position is decided, a total of four places of the stay which removes the cowl which tightens the screw of a total of four-place upper part of stay, and a lower screw will be tightened. Up-and-down part are bundled. It wipes by a silicon cleaner. A description is unkind and I would like to have a detailed instruction. Stays are different in each, if it is separated, it would be difficult. For your reference. View detail