Reviews
It's too bad it's so expensive and so poorly made.
The back of Carbon was sketchy. (Lol) If you look through the light from the back, you can see that the back is crudely made.
Magical and K Labor are not trustworthy these days because of their high prices and poor workmanship.
It would be nice if other manufacturers had parts, but most of the GSX1300R HAYABUSA's carbon is from two companies, so there is no choice.
It looks good, but I wish the price would be lower if it is made this bewilderingly messy.
View detail
Style good
The design is very good, although it depends on the individual. View detail
Ideal STREETFIGHTERStyle!
[How is it used?
Installed on 2019_CB1000R.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
Basically, installation is easy as long as you follow the easy-to-understand Installation Manual (with color photos).
Point of work
(1) It is easier to work on the Left Side if the vehicle body is straight (using a motorcycle stand).
When installing the oil pan screw (with the attached bracket), the exhaust pipe is in the way.
A Hexagon socket would be useful.
(3) The band fixing bolt at the exhaust joint must be rotated toward the rear of the vehicle body to avoid interference.
In case of AKRAPOVICExhaust System with Slip-on Silencer
(4) Matte under the body will prevent the Cowl from getting wound when it is dropped.
How was your experience with it?
I am satisfied with my ideal Style and the Large change.
Part accuracy is also Magical racing! The notch position of the interference escape and the mounting holes were exactly right.
However, it needs to be cleaned regularly because gravel accumulates.
[Included Parts:were they on?
Everything needed for installation is included.
Includes Installation Instruction Manual and 2 Stickers
[Was there anything that disappointed you?
The delivery time is 、、、、 I ordered in December and it arrived in March.
*The schedule was for a May arrival, so it arrived two months early, but...
View detail
?????
[How is it used?
It's working fine.
Was the one you received as per Image?
Coloring was also satisfactory with the same color as the OEMCowl!
Was the installation difficult?
I made the Cowl Bracket by hand, so it was a bit of a struggle, but if you are an OEM, I think you can make it as Smooth as a screeno replacement!
How was your experience with it?
I personally like it very much.
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Magical racing indeed!
Installation was easy, as it was designed specifically for the car model.
(Chain Cover behind Left has been cut a little)
But is it a Normal muffler assumption?
My CB400SB has an external Full Exhaust System, but there is almost no gap between the bottom of the exhaust system and the bottom of the cowl. (Postcard does not go through) AluminumHeat Seat was applied for heat protection.
When I installed it, Parenthesis improved so much that I don't care about that, and I am really Large satisfied.
View detail
Magical racing indeed!
Magical racing indeed!
The part that enters the view is smaller than the products of other manufacturers, but it is made in consideration of the bank angle, and because it is manufactured for each car model, it can be installed avoiding STAND, although it is still in the temporary fixing stage.
One disappointment is that it is based on Normal muffler?
My CB400SB has an external Corresponding Exhaust, but the bottom exhaust pipe assembly is in contact with the bottom of the Under Cowl.
I'm going to put a heat-resistant aluminum sheet on it for the time being, but if that doesn't work, I'll have to cut the parts that are in contact with the Exhaust System. I just pray that the heat-resistant aluminum sheet will fix the problem.
Other than that, I am satisfied with the level, so I would like to enjoy my motorcycle life with CB400SB which has improved parenthesis by wearing Under Cowl.
View detail
Style as I expected
[How is it used?
City driving, Touring, Commuting
Was the one you received as per Image?
Black Gel Coating is more beautiful than I expected.
Was the installation difficult?
The exhaust pipe of AKRAPOVIC and the area of the silencer interfere with each other, so I had to shave them off.
How was your experience with it?
I am satisfied with the ideal style of Large. The Oil Catch Structure is also functional and beautiful.
[Included Parts:were they on?
LargeSticker×2 attached.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Magical racingFI Kaoru
Twill weave, Injection cover. happy with the look. remove NORMAL and pimp it. View detail
magical RacingUnder Kaoru
I installed it on my cb400sf. I was worried about other Manufacture, but I am glad I went with Magical racing. View detail
Parenthesis is better now.
I installed the Under Cowl to prevent OIL from dripping on the circuit, but I installed the Parenthesis because I like the Parenthesis. I think the OEM Exhaust System is easy to install (the sensor mounting screws on the side stand are coated with anti-loosen agent, so be careful not to lick them). (The sensor mounting screws on the side stand are coated with a non-loosening agent, so be careful not to lick them.) View detail
Self-satisfied...
[How is it used? City Riding - Touring - Circuit - Mountain Pass
Was the one you received as per Image? Very beautiful piece.
Was the installation difficult? Pimp it!
How was your experience with it? Not at a Level where the effect can be felt, in general, self-satisfiedParts
[Included Parts:were they on? With AdapterParts for installation
[Was there anything that disappointed you? None
Other items that would be helpful
[Opinions and requests to Manufacturer Could you do it a little cheaper! I gave it 4 stars because it's way too expensive!
View detail
I think it's very satisfying because it's the part you see when you get on the train.
Remove the OEMInner panel and foundation, attach the included FRPBracket and install this product - a 10 minute job.
However, the OEM has a push rivet and pawl on the side of the meter to hold it in place, but this product does not have a fixation in that area, so it flexes when force is applied from the front side….
I guess it is not something to worry about in the normal use range, but I was concerned about it, so I put the FRP Bracket on while leaving the OEM base, and then I put the FRP Bracket on the top of the bracket and fit it in.
View detail
Carbon Side Cover is attached to New Model GSX1300R HAYABUSA.
The OEM side cover had a GizaGiza pattern that I personally didn't like, so I purchased a twill weave Carbon Side Cover from Magical racing.
My personal impression is Merit? If properly aligned, it will adhere well and cleanly.
As for the Demerit? The OEM frame has no screws, claws, etc., so it is not as strong as the OEM frame. The heat from the frame is transferred immediately and the thighs are hell. (It may be heaven in winter).
? The instruction manual is a bit of a mess. The instruction manual is a bit confusing.
I know there are individual differences, but in my case, I happened to have Impact, Double-sided Tape, and Silicon-off etc. tools, so I was able to install them by myself.
Bracket partially modified ? Side cowl is removed for chipping.
If you don't have such tools, I think you can throw them to Motorcycle shop.
I think the product itself is very beautiful and good, if a little dry.
View detail
Yoshimura cyclone volume and Under Cowl are now good.
Yoshimura cyclonesq and Exhaust System catalysts (Lunch box) I was concerned about the balance with the lunch box, and thought it might be resolved by adding the Under Cowl. I thought it might be solved by adding Under Cowl. At first, I used Carbon (Plain weave) Next (twill) I had ordered FRPBlack, but the delivery date for both had been extended and I had cancelled the order, but suddenly FRPBlack showed up in stock, so I ordered it without hesitation.
It took some time to paint with BlackMetallic, but installation was very easy.
As you can see in the photo, the balance of the entire system, including the exhaust system, has been improved and I am satisfied.
Also, even if it is not Carbon, I am satisfied with the texture if it is painted.
View detail
That's so cool!
[How is it used?
I've wanted an Under Cowl for a long time, and I took the plunge and bought one! I knew it would be inconvenient for my use, but I wanted it anyway, so I didn't care.
Was the one you received as per Image?
As per Image, the packaging was well done and the quality was decent. I was surprised that it took a little over a month to receive the product, although I was originally told that the delivery time would be 4 months.
Was the installation difficult?
I had to do a little work, but I bought it knowing it was not compatible, so if it was, it would be very easy to put on.
How was your experience with it?
Inconvenient!
[Included Parts:were they on?
Included Parts:were all firmly attached!
[Was there anything that disappointed you?
Nothing in particular, Magical racing things are good indeed.
Other items that would be helpful
If you use some Tie Wrap, you can install the Point of Installation or hang 2016 CB400SF. You can do it!
View detail
Easy to use!
I don't need it, but it's a pain in the ass to tap every time, and it looks like Race ish, so I bought it. It's very easy to use and I like it. I thought about painting it properly, but I decided to leave it as is. View detail
good
good.
I ordered frp rather than carbon and I am satisfied
As it is glossy, it can be just installed, but I think it is vulnerable to scratches.
Installed after wrapping
Frp is recommended for those who do not want to wrap.
If you just want to install it, I recommend using carbon.
The installation manual is good, but the size of the picture is a little bigger
It would be better if you did --------------------------------------------- ------------- It is good.
I was able to order with FRP, not Carbon, but I am satisfied
I am satisfied
I can not be able to mount it, but I think it will be vulnerable to scratch
Recommended
It is recommended that you have a carbon recommended for the carbon.
View detail
Used for Race
I bought this for my MC28 for RaceNumber Plate. I won't have the opportunity to use it again this year, but I hope to use it for next year's Race. I really like the look and feel of it, no problems. View detail
I think we have enough.
As for the installation, I was not surprised because I had checked other people's impressions beforehand, but the length of the Bolt was still not enough.
I contacted Manufacturer and they responded immediately, so I think it is possible to consult with them.
I didn't use the double-sided tape that came with it, I used Velcro tape and Bolt that I had purchased separately to hold it in place.
The Bolt fixture also has a RubberWasher in between.
I don't really feel like the fitting is perfect.
The mounting surface will be scratched, but depending on the purpose of use, I think it can be divided and used.
View detail
Under Cowl
I put it on spec3.
I had replaced it with a WR'S Full Exhaust System, but I was able to do it without any modification.
I'm not very good with my hands and it took me about an hour.
View detail