Reviews
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZrX1200ZrX1200 DAEG
Extended OEMScreen shape
I had attached an inexpensive Aero Type shaped Smoke Screen, but I wanted to use a more modest shaped Long Screen, so I purchased this one.
It's like extending the OEM by 5 cm as it is, [Color] The Smoke is not too dark, and the screw hole position is also excellent, so I was able to install it without any problems.
It is about +2000 yen more than the price of OEMScreen, but it comes with a Screen jacket and moldings etc. to protect it from Wound when parked, so it is a good value (lol).
View detail
There is a beeping sound.
After driving about 50 km after installation, there was a chatter sound during Eight Rings and certain vibrations.
It is quite worrisome, especially during Idling.
It was not there when I installed OEM Product or YOSHIMURA's WINDOOR MAR. This may be due to the fact that this product is thinner than the OEM Product, I will try to install Rubber's Spacer in some places.
View detail
Smaller than expected.
Remove OEM, install Spacer, slip on Screen, Torx screwQuantity:2pcs to finish installation. Installation is a simple 5~10 minute process.
It may be an individual difference, but there is some wobble and may need to be adjusted with a rubber.
It was smaller than I had expected.
The wind seems to hit both shoulders.
View detail
It is highly satisfactory in Magical!
I am highly satisfied with Magical's Carbon parts after a long time!
It fits nicely without Small processing like Side cover or Inner cover and looks very good!
All of Magical's Carbon products are expensive, but I did not feel that Screen was too expensive! I didn't feel that Screen was too expensive.
I am satisfied for the first time in a long time!
View detail
Aerodynamic effects exceed expectations
I recently bought a Pannier case for my MT-07 and have been doing more long touring,
I'm starting to worry about wind pressure at high speeds now.
Consider Visor Cowl for a proper aerodynamic effect.
Saitaniya was good, but Carbon Spec.
The price is not much different and
I went with Magical racing, which seems to have a solid mount.
The initial response was a fairly long delivery time, but it took about a month to arrive.
There is only one point of installation,
The stupid holes that hold the front mount in place with the OEMBolt are
It just barely does not fit against the Screw diameter. If the angle swings too much, it will be too subtle.
Spread and install with Reamer until it passes through the Limit.
I'll give you -0.5 points for that one.
The others fit EXACTLY.
The actual run was more effective than expected.
People often say that Bikini cowl is only for looks, but what's the point?
Not at all.
The wind pressure is reduced up to 80 km/h, and from that point up, the wind pressure is further reduced.
Mount especially the back side is solid, so no Chatter at all.
It's not like there's no wind in the stone.
The conventional small rizoma was a blast from the chest up.
It changes to about the top of the neck, and then it is all the more easier when you get down a bit.
Income's audio viewability is also much better.
This summer, we're going GunGunLong!
View detail
Fits: KAWASAKI NINJA2 Helmet50R ABS, KAWASAKI NINJA400 (2014-)
Design is the best!
The unique design is cool.
The finish is excellent and can be easily installed.
However, Carbon parts are hard because of the long delivery time.
View detail
Fits: KAWASAKI ZX4R SE, KAWASAKI ZX4R, KAWASAKI ZX4RR, KAWASAKI ZX25R
It's a very expensive item, don't make me process it...
Bolt holes did not fit, so they were machined.
It's a little disappointing because it's an expensive purchase.
View detail
Best for DOING
It came in surprisingly quickly.
Originally, it was a MODEL with few custom parts, and Screen had two choices:Puig, which was attached before, and this one. (There are others, but they are Parenthesis bad.)
As expected of a Magical product, the texture is perfect.
It also looks more fearless, standing lower than any other product.
The holes were slightly misaligned, so they were carefully tightened.
If I wanted, it would be 100% if it were a little shorter since I don't have a windshield effect on the plane anyway.
View detail
Fits: KAWASAKI ZX4R SE, KAWASAKI ZX4R, KAWASAKI ZX4RR, KAWASAKI ZX25R
Just the right height
I was dissatisfied with the height of Zero gravity's Double bubble, so I looked into other options and decided on this one. I was not satisfied with the height of the Double bubble. View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZrX1200ZrX1200 DAEG
Just the right size feeling
I bought this product because it is a trusted Manufacturer.
The warped design of Zero gravity is good, but I prefer the Straight type, so I chose this one.
[Color] I chose Smoke, but the blackness is rather dark and parenthesis is good.
Visibility is not a particular concern since, unlike SS, it is not viewed through the Screen.
The texture is solid and there is no chattering noise etc. when driving.
The longer length than the OEM made it possible for us to feel the dress-up and the wind pressure reduction at high speeds.
View detail
Parenthesis is good, but...
Delivery arrived sooner than I expected, about a month, but I am slightly dissatisfied with the detailing.
If you don't look closely, you probably won't notice it, but for the price, I think it's a good idea.
Visibility is good and clear, so you don't have to worry about getting down.
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZrX1200ZrX1200 DAEG
Straight
I bought this because I wanted a Screen that was straight.
It looks cool. I couldn't tell much about the windproof effect.
View detail
outstanding accuracy
There are various Universal Products, but it was Large correct answer when I tried to make it a brand product boldly. There is no distortion when I look into it and I can feel that it is made of very high accuracy. It's only Screen, but it's just Screen. Unexpectedly, there is also a little windproof effect. View detail
The accuracy of the product is perfect, but it could use a little more thickness
Throttle holder, Radial brake, while the screen of the pooch was changed from the Screen It was changed to a new one, which required some modification and adjustment before it could be installed View detail
Replacement of chiseled screen parts
The screen chisel of the Carbon trim that was attached to the car from the time of purchase is removed [Color] From Smoke [Color] Replaced with Clear
It's nice to be able to change only the screen, but
expensive
The Trim part is quite cheaply built at Pe LePera, but it's pricey!
I think the screen part is a perfect construction
No distortions, good visibility
View detail
Best in the Screen at Dress-up!
important item
[Was there anything that disappointed you?
There's nothing to say with your voice on Large!
There is a little bit of floating with Upper Cowl, but Other Brand Product So it's a charm
Do you have any wishes or improvements you would like to make for the Manufacturer?
Material:It's a Carbon product, so I had to do it, but I couldn't wait for the delivery date!
Also, I need you to re-order the Chain Cover!
[Do you have any products to compare it to?
As for the products that I was unsure about, Pooch and Zero gravity's Screen
Frequently Asked Items
What made you decide to buy?
Carbon parts are available from a manufacturer that deals in carbon The thing is that it was a snazzy Screen incorporated into some of them!
How was your experience with it?
Fitting is not a problem and there are no unusual noises when driving
Running wind, of course, doesn't hit your body anymore than the OEM!
As a sensation, the wind that was hitting my chest is about the neck
Was the installation difficult?
If you know how to get into the Screen, you can install it without any problems
【Please tell me the installation point and hang】
When attaching and detaching the Screen, you can flex the Screen slightly while working to make it easier to detach the claws Easy Gentle so it doesn't crack!
[Was the Instruction Manual easy to understand?
It wasn't particularly necessary, but I think it would be helpful if there was a hang or something about how to remove Screen
It said to put the well nut in from the umbrella side If I didn't, I would have put it in the other way around ()
[Included Parts:were they on?
A well nut for installation is included in a new one, and I thought I was going to use it for OEM I was grateful for that!
I don't use it because I keep it in Garage, but it's a screen jacket for sun protection (Like SilverMatte.) It came with the Screen, which is soft and prone to scratching The Manufacturer knows what it's doing!
[Others]
Carbon is beautiful, and the dress-up effect is outstanding!
(Around me.) Lots of pooch and zero gravity, R6's Screen, but I'd recommend this one too!
View detail
Longer than NORMAL
Because it is 40mm longer than the NORMAL, there is a slight difference in the way you get tired after touring It is
No distortions etc. and very solid as far as construction is concerned
[Color] I chose Smoke, so I feel like I'm changing from NORMAL to shape There is no discomfort at all from NORMAL
View detail
The construction is good
As soon as I started riding it, I switched from OEM to Puig's Screen, so The comparison with OEMScreen is not possible, but with Puig, you can see the bracket in full view I replaced it with this one because of the way it looks I'll have to wait two months after I order because they are almost out of stock, but I happened to find it at We-Big plain weave [Color] I bought it because I had Smoke in stock for immediate delivery
Compared to the Puig, the width is narrower and there is more wind on the shoulders, but the Center part of the Puig There is no difference between Puig and Large even if it is short because it is more raised It only takes 10 minutes to change the In Puig, if it's only one night or a day trip, I think it's possible to use Magicalracing It is
View detail
This is before installation, so impressions before evaluation
I thought it would take a long time to deliver on a Made-to-Order basis, but it took 6 days to order Arrive with your eyes
Type Super coat I am very happy with it, and it even comes with Screen Protection Cover
View detail
Looks cool and I'm looking forward to installing it!
There's a choice of Carbon types, and they look great, and they're a cool racing type!
I'm looking forward to installing it, but I'm also concerned about its performance as a windbreaker
View detail