Reviews
Too much shaking bothers me.
The Fender Eliminator is also long, so it swings vertically over bumps and other obstacles.
All those who have seen it for the first time say they are worried about the sturdiness of Large's installation if they look at it from the back.
A friend of mine who bought the same one said he got tired of it and decided to go with a different Manufacturer.
To be honest, I don't really recommend it.
View detail
Carbon number holder
Rough cut surface at the top for a reasonable price.
Disappointed.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Tie Wrap Fixing is too sad.
The product itself is well Large body Large sturdy.
It is too bad that it is planned from the beginning to just stop at Tie Wrap.
If you use double-sided tape, it will be a hassle later, and the Tie Wrap itself has to be very long. (It is included in the product, but the quantity:2pc only)
In case of OEM Exhaust System, it is better to remove only Silencer. It will be a huge obstacle. It may be possible to put it on without removing it, but you don't want to get scratches all over it. It can be removed with 3 Bolts on one side. After all, it is faster and easier.
I didn't understand what the Instruction Manual was saying for a while because it was just text.
If you know what I mean. Manufacturer doesn't want to take care of anything." I think it says "I'm sorry, but I'm not sure. After all, there is no reference to the installation itself. I wonder what is this Manufacturer….
View detail
Quite a hassle to install.
Additional Impressions.
I referred to First's impressions and the installation was a little Large strange as described.
Instruction Manual is clunky and unfriendly!
It is explained that it can be installed without removing the cowl, but it is very difficult to do so without removing the cowl! I'd say it's impossible!
If you don't modify the position of the bracket, there will be a gap if you attach it as it is!
It says "Magic tape included" but it's not. You have to remove it from OEM and transfer it!
It looks like the Instruction Manual doesn't add Rubber molds, SpongeCushion, etc., but if you're interested, there's nothing in there, so you'll have to remove it from the OEM and relocate it successfully!
It's just a mess, made of carbon after molding! Clearance, Included Parts:, and so on!
Please install it with the assumption that it will be modified! Magical thinks that (Lol)
Installation was not difficult, but to be honest, it was quite tedious.
View detail
It's too bad it's so expensive and so poorly made.
The back of Carbon was sketchy. (Lol) If you look through the light from the back, you can see that the back is crudely made.
Magical and K Labor are not trustworthy these days because of their high prices and poor workmanship.
It would be nice if other manufacturers had parts, but most of the GSX1300R HAYABUSA's carbon is from two companies, so there is no choice.
It looks good, but I wish the price would be lower if it is made this bewilderingly messy.
View detail
This time A front/rear A fender and a chain cover. although purchased A little unreasonableness has a hole location of attachment, and the result is not good considering a price. again -- a front/rear one Fender There is also no hole for a brake hose
This time A front/rear A fender and a chain cover.
although purchased A little unreasonableness has a hole location of attachment, and the result is not good considering a price. again -- a front/rear one Fender There is also no hole for a brake hose to be fixed. the detailed explanation of the front fender goods which made the hole by themselves and fixed the hose clamp -- exchange
there is no specification removing a wheel It was thought that it was unkind. Even if it also asks a manufacturer Such explanation is unnecessary. Come out of a word. Very unkind correspondence it was disappointed ... Is it the consciousness of the parts supplier for races???
View detail
Not good for the price.
In the product photo, it seemed to have a windproof effect, but the Screen is not wide and the height is low and not so effective.
It's a shame.
The screws that came with it were 1 pc too long and nearly damaged the BodyBracket.
Screw Remaining Quantity:The 2pc also ended up using the OEM Product.
Also, the mounting hole was gap, so we had to make a long hole.
View detail
It takes time to deliver.
The installation does not fall off if it is fixed at two places with the attached collar and Bolt. although it has become Spec. to be used together with Double-sided Tape, when I think of taking off Cowl by Oil exchange, etc., I fixed it only with Bolt because it becomes to peel off Tape every time, but there seems to be no problem. If you are worried about it, I think it is enough if you assist with something like Magic fastener. I hope that the manufacturer can respond to this area. The smell of Resin comes up by heat, is Racing cowl such a thing? I was a little concerned about this.
The other drawback was that it took 4 months to deliver. If you count backwards, you might want to allow for January.
That's part of the satisfaction.
View detail
Just like the last Chinese one I bought!
It was exactly the same as the Chinese CarbonRadiator cover I bought before!
Especially on the bends, it's not transparent or clear, it's a slightly white and cloudy clear!
You're letting China build it!
From a distance, it looks fine, but it's Chinese! There are two places where the holes don't line up!
This is too pricey for me.
View detail
I need better packaging.
[How is it used?
Dress-upCustom
Was the one you received as per Image?
Yes
Was the installation difficult?
It's Bolt On, so even beginners can do it.
How was your experience with it?
Satisfied as a Dress-up
[Included Parts:were they on?
Instruction Manual and parts were included properly.
[Was there anything that disappointed you?
The product was cracked or chipped.
As soon as I received the product, I checked it and found cracks and chips in the product.
I'm not certain if they packed the item broken or if it was broken during delivery, but I would like to see them pack it a little better.
I thought about returning it, but gave up because it seemed like a long time to return it and a long time to get a new one.
The product only said it would fit up to a 16 year model, but I was able to install it on a 20 year model I own.
View detail
Lack of strength, the texture is cheaper than I expected.
Material:Although it is carbon, I felt it was cheaply made for the price. The bracket from Universal Product was better. View detail
Used for other purposes
I'm using short Katanaspec. on my SV650, and I want to change the smoothness of the rear part Buy ⊂ (^) ^)⊃
Two One Side holes and a little space between the rear cowl and the rubber It was
I am satisfied personally (^-^) v
It's not suitable for use, so the rating is low (__) m
View detail
So bad
I think it's necessary to install it as OEM parts like other cars
For what it's worth, it hasn't been installed since L7
Originally I wanted to put it on as it is, but it is still Double-sided Tape and In Tie Wrap
That speed, I don't think it's suitable for acceleration
At first, I thought I could use double-sided tape, but
Over time, moisture, sand, and small stones can get into the crevices
It adhered to the tape and floated away
I'm thinking of a chain case in one piece
I'd like to ask you to develop it
View detail
Products different from photos
In the photograph, Material attached by Screw : Rubber parts were not attached, and it took quite a while to install. It is bad that I did not notice it, but I was going to repeat the desorption and as a result Crack entered. Processing is necessary for price price etc. etc. Including this evaluation. Please check carefully when installing so as not to make the same feeling. View detail
Accuracy is bad
Originally it seems that it can not be stuck firmly along the Tank cleanly
The accuracy of Right Side is particularly poor
Something like floating in front or back.
Left was disappointing when trying to add Right to just as good as it was.
View detail
Pretty thin Material : FRP is
Installation is accompanied by instruction manual but I do not know well because the picture is difficult to see but can be installed easily with Bolt 3 and Cable ties. Since this Cable ties is conspicuous conspicuously it is only necessary to fix Bolt if possible, but it is distorted if it is not fixed with In Hemp palmk.
It is quite thin FRP but it is Pena Pena, is not it?
Although OEMRear Fender of other car models has quite a firm rigidity - - -
The most interesting thing was that there were several scratches in conspicuous places.
I think that there are many people who do not paint if Gel's Black is selected, but as expected it is a brand new wound.
Making is good, quality control is not good.
Because there is no Chain cover, because the Arch of Tire's width is also available for Large and Tire warmer, the space with Tire is quite large.
I hate it, but I'm sorry that it was good that the space with Tire was small.
It is a Parts claiming to install because it is Large.
View detail
Poor accuracy
Dealer got pasted according to new car purchase, but various places will float.
From Dealer 's Mechanic, it was said that sand etc will enter from the floating place and Wound will be attached, and it was removed instantly.
Material : It may be a characteristic of the Carbon product, but I did not buy it with a high Gold paid.
View detail
It looks nice
CB400SB (NC42) Painted to Red and fitted.
Instruction Manual Exactly attached to places as raw.
STANDetc. No interference at all, accuracy is no problem.
It functions as Oil receiving without problem.
..., but the body touches the ground before the Full bank floating and falls over.
It will not be used as it is at Circuit and Pass.
I get in touch with a little Gap on the street ride.
CB400SB (Or SF) It is that the design of itself is not a premise to wear an Under Cowl.
Sorry for the high degree of perfection in appearance.
Since it can not be helped, it shifted considerably in the front direction and it stopped with Tie Wrap.
While this is grounding the Under Cowl CHALYCHALY, you can do a full bank up to the extent of footpeg rubbing.
It seems like people in a riding way that does not let you bank in appearance is good.
View detail
After accident repair
Following the repair that was hit around Number, we ordered via store and asked for installation.
I have no idea about the accuracy of the mounting hole as it is left to the shop, but it is attached to the Beauty without the installation being tilted, in particular.
Bracket of the License lamp seems to be a common part, but Body is twill weave against plain weave, so if you want to unify the atmosphere at all, I want you to make it black.
Material of Body : Carbon Style seems to be only in the visible range, and the inner part is FRP? It does not matter, but there are some areas where you can see where the bubbles entering the switch become Crater and appear on the surface, That's a pity.
View detail
Cost performance Bad
Although the price was expensive, I bought it by being drawn by other looks.
Carbon and Super coat are so conspicuous that they are satisfactory to the eye.
However, Super coat part is considerably brittle, and it will scratch immediately.
Because there is a Carbon part, visibility in the screen is quite bad though it is natural.
It took a long time to deliver the product, the delivery schedule was stretched twice and it took 1 month from the order.
Also, when installing, the size of the hole was too small, so it could not be installed without processing.
The Carbon and Super coat parts are cheap at the Rivet 4 point stop and Vinyl protecting the enclosed Screen does not match the body of GSX 1300 R HAYABUSA and does not make sense.
There is a large step difference at the joint between Carbon part and Screen part.
Windproof effect is not different from OEM.
The instruction Instruction Manual of the product is enclosed and it does not go away, and the accuracy of the commodity felt quite poorly in proportion to the price.
View detail