Reviews
Purchased for a Circuit run.
I bought Plain Weave Carbon, the mold with Tank is also good as it fits Exactly.
Less movement of the hips and lower back in Circuit driving and easier in Breaking.
Almost all of my Circuit buddies are installing them!
View detail
I like Carbon!
Originally purchased as a connection until the 24 MODEL colors were released.
Still, I liked the sense of unity with the other Carbon parts.
View detail
Double-sided tape is weak.
I bought it because I wanted to change the cheap look of the transparent plastic cover of the ZrX1200 DAEG Meter, which I had been interested in for a long time.
The double-sided tape was not very adhesive and peeled right off, so I cut a piece of Ultra Strong Double-Sided Tape for Emon's exterior parts in the size of 5mm?20mm and reattached it. Ultra Strong Double-Sided Tape for Emon's exterior parts, 5mm?20mm in size, and re-cut and reapplied.
I chose G Silver and was personally satisfied with the AluminumMount Meter-like look.
Also, there were a few minor issues, such as a gap in the position of the blinker indicator hole and a slight gouge in the hole for the high beam indicator. This is unfortunate because these are not cheap parts.
View detail
Fender Eliminator Kit for ZX-10R 2016
This product is marked for 2016, but can be used for 2019 models after Minor without problems.
I was looking for a Fender Eliminator Kit that looked somewhat nice in shape and chose this product. It was a bit chunkier than I expected and not as stylish as I wanted it to be, but I am generally satisfied with it. LOL!
This product is available in Black Gel and Carbon etc. Variations are available, but I do not like Carbon very much, so I purchased Black Gel and finished it with Matte Black, a two-component urethane paint. After all, Material:Because it is an FRP product, it was distorted and a little difficult to install.
The Fender Eliminator KitBody has φ6.5 holes in the mounting area, but if you want to put the License Plate and Blinker straight back, the clearance of the holes is not enough. I re-drilled all the holes with φ8 and adjusted them as I went along.
But the above processing is just processing because I am a nervous wreck. If you don't mind, you won't mind at all.
View detail
It was just as Image.
It was as per Image but … installation was difficult.
I have a hard time installing the Right Side, especially as per other comments.
The back of the Right Side interfered and I really did not want to cut it off, so I used a Spacer collar and managed to install it.
If scraped off, maybe Quantity:Pair (for Left and Right) I think the symmetry will not match. We have to temporarily install it and consider the thickness of the Spacer collar.
Quantity thanks to Spacer collar:Pair (for Left and Right) Symmetry is not a problem!
It rained during the Touring and it worked well to keep rainwater and mud out. My friend who was running behind me also wanted one.
View detail
For those who want to make inner fender look cool...
When we converted to Fender Eliminator, the OEM Rear Fender splashed a lot of mud, so we purchased this product, which was extended from the OEM Shape.
I ordered Black Gel because I wanted to put Sticker on my Fender and I thought it would be unnatural to use Carbon only here.
It looks great, cool !!!! I thought, "Wow!
But as to whether the mud splash was reduced, well, as you can see from the length, it didn't change much (lol).
My car is equipped with a rear box, so my back is protected there, but if you have a box-less type, I recommend the OEMFender.
However, I think I can recommend Inner fender to those who have the sensitivity to think it is cool with an extension!
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZrX1200ZrX1200 DAEG
Extended OEMScreen shape
I had attached an inexpensive Aero Type shaped Smoke Screen, but I wanted to use a more modest shaped Long Screen, so I purchased this one.
It's like extending the OEM by 5 cm as it is, [Color] The Smoke is not too dark, and the screw hole position is also excellent, so I was able to install it without any problems.
It is about +2000 yen more than the price of OEMScreen, but it comes with a Screen jacket and moldings etc. to protect it from Wound when parked, so it is a good value (lol).
View detail
There is a beeping sound.
After driving about 50 km after installation, there was a chatter sound during Eight Rings and certain vibrations.
It is quite worrisome, especially during Idling.
It was not there when I installed OEM Product or YOSHIMURA's WINDOOR MAR. This may be due to the fact that this product is thinner than the OEM Product, I will try to install Rubber's Spacer in some places.
View detail
Smaller than expected.
Remove OEM, install Spacer, slip on Screen, Torx screwQuantity:2pcs to finish installation. Installation is a simple 5~10 minute process.
It may be an individual difference, but there is some wobble and may need to be adjusted with a rubber.
It was smaller than I had expected.
The wind seems to hit both shoulders.
View detail
Bold & Strong Design, Some Fitting Difficulties
This fender is both futuristic and retro in dark Bladerunner style! Flawless twill weave carbon construction is stiff and very strong, while saving 0.5 pounds from the unattractive oem fender. Installation was a little more tricky -- I had to slightly ovalize the fender's mounting holes to prevent cross-threading the screws. If you have ANY trouble starting the screws, STOP and use a small hand file to expand the holes slightly. Take your time here to do a good job, and you will succeed. I give 5 stars on design concept and beautiful quality of carbon twill, 3 stars for some problems when installing. Web!ke Japan, you impress me so much! 43 hours from placing order to opening the box in my garage in California! You set the highest standards, keep up the great job. View detail
Good product
The MRMirror I own has a footing Plate B Type and I have just purchased this product to install on my ZrX400.
The price is high, but the accuracy is perfect because it is a dedicated product.
View detail
I had a hard time buying it.
The OEM fender was removed and the Carbon fender was simply fixed with the 6 Bolts provided. I painted the screw lock just in case.
There were some disappointments in the finish of the product, but I don't mind a little bit because there is always something wrong with Magical racing's Carbon products.
It is not yet running, so I will test it this weekend.
View detail
Equipped with undercowl
Installed on a 2023 model year vehicle.
There is no major difficulty in installation, and it is a product that can be installed by yourself.
However, the 23-year model has a different muffler line from the 18-year model.
A little processing is required for the new model.
If you process a little bit on both sides of the front part of the meni side, it will be installed enough. -------------------------------------------------- -------- It was installed in the 2023 car. It is a product that can be mounted enough by self-confidence because it does not have much difficulty when installed. However, in the 23rd year, the muffler line is different from the 18-year model. The new model requires a little processing. If you process both sides of the front of the mani, it will be installed enough. Powered by Google Translator
View detail
It is highly satisfactory in Magical!
I am highly satisfied with Magical's Carbon parts after a long time!
It fits nicely without Small processing like Side cover or Inner cover and looks very good!
All of Magical's Carbon products are expensive, but I did not feel that Screen was too expensive! I didn't feel that Screen was too expensive.
I am satisfied for the first time in a long time!
View detail
Magical racing twill weave Carbon rear inner fender
It is longer than OEMFender, so it is more effective at keeping mud off.
I think it is beautiful Carbon and wonderful.
Design could have been a little more angular.
View detail
Fits: SUZUKI TL1000L, SUZUKI TL1000R, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R6, SUZUKI SV400, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R750, KAWASAKI ZX-9R, SUZUKI GSX-R1000, KAWASAKI ZXR750, KAWASAKI ZX-9R, KAWASAKI ZX-7RR, KAWASAKI ZX-9R
It's light!
It's so lightweight and the design is cool!
It does not have the flexibility of the OEM's moving parts, and the Mirror position must be fixed with Bolt, although it is thin and adjustable. That is the only thing that should be different for different likes and dislikes.
I would also like to see more attention paid to the quality of the details. For example, the chamfering may be a little rough because it is carbon, but I wish the Bolt had been made black and rust-proofed spec. so that the color could be unified.
Once you do it, you will know it, but I would like to see it mentioned in the installation, as there is a HANG in the assembly sequence.
Overall, I'm happy with it
View detail
Aerodynamic effects exceed expectations
I recently bought a Pannier case for my MT-07 and have been doing more long touring,
I'm starting to worry about wind pressure at high speeds now.
Consider Visor Cowl for a proper aerodynamic effect.
Saitaniya was good, but Carbon Spec.
The price is not much different and
I went with Magical racing, which seems to have a solid mount.
The initial response was a fairly long delivery time, but it took about a month to arrive.
There is only one point of installation,
The stupid holes that hold the front mount in place with the OEMBolt are
It just barely does not fit against the Screw diameter. If the angle swings too much, it will be too subtle.
Spread and install with Reamer until it passes through the Limit.
I'll give you -0.5 points for that one.
The others fit EXACTLY.
The actual run was more effective than expected.
People often say that Bikini cowl is only for looks, but what's the point?
Not at all.
The wind pressure is reduced up to 80 km/h, and from that point up, the wind pressure is further reduced.
Mount especially the back side is solid, so no Chatter at all.
It's not like there's no wind in the stone.
The conventional small rizoma was a blast from the chest up.
It changes to about the top of the neck, and then it is all the more easier when you get down a bit.
Income's audio viewability is also much better.
This summer, we're going GunGunLong!
View detail
I'm satisfied with the product because it's good, but isn't the price too high?
I bought the inner panel Carbon because only Magical is available. The installation is easy and the parenthesis is good, but I wish the price would be around 40,000 yen for the size of the parts. I think the price is very expensive to be honest. View detail
Fits: KAWASAKI NINJA2 Helmet50R ABS, KAWASAKI NINJA400 (2014-)
Design is the best!
The unique design is cool.
The finish is excellent and can be easily installed.
However, Carbon parts are hard because of the long delivery time.
View detail
Magical racing indeed!
Installation was easy, as it was designed specifically for the car model.
(Chain Cover behind Left has been cut a little)
But is it a Normal muffler assumption?
My CB400SB has an external Full Exhaust System, but there is almost no gap between the bottom of the exhaust system and the bottom of the cowl. (Postcard does not go through) AluminumHeat Seat was applied for heat protection.
When I installed it, Parenthesis improved so much that I don't care about that, and I am really Large satisfied.
View detail