Reviews
Wheel replacement is ….
Chain cannot be bent when removing and replacing the wheel.
Suggestions for improvement.
View detail
It arrived a month early... but maybe I had high expectations...
Of all the Magical Racing products, this was the most expensive one I bought and had the highest expectations...
I really liked the room side tape inside and lots of cushioning products.
However, when assembling, the bolt holes did not line up, so I had to do some machining.
I'm so scared of taking the under cowl off again.
It may not fit as well as the original cowl, but
A few of the bolt holes were misaligned, so there was a situation where the carbon broke into small pieces during processing, but it was still too far to replace it, so I just used it.
It's not as good as a homemade cowl, but it's a product that requires some processing ㅠㅠ ------------------------------------- --------------------- Of all the Magical Racing products, it was the most expensive and had the highest expectations... I really liked the room side tape inside and Lots of cushioning products. However, when assembling, the bolt holes did not line up, so I had to do some machining. I'm so scared of taking the under cowl off again. It may not fit as well as the original cowl, but A few of the bolt holes were misaligned, so there was a situation where the carbon broke into small pieces during processing, but it was still too far to replace it, so I just used it. It's not as good as a homemade cowl, but it's a product that requires some processing. Powered by Google Translator
View detail
Dissatisfied with the way it was packaged
The product itself was fine, but Yamato Transport informed us that the corrugated cardboard had been torn during shipping due to the sharpness of its shape, and the contents had leaked out.
Since this is an expensive item, please respond with another One sizeLarge corrugated cardboard with cushioning material packed, etc.
View detail
No slippage!
Wet type is not slippery anyway.
The drawback is that it is too grippy, and if you don't give it firm action, you can't shift the hips with Seat.
View detail
Scratch regrets
Delivery and packaging were good, but there were scratches on the product.
Until exchange request
But my effort and time
It's a shame.
People around me said it was a good brand, so I ordered it, but I was very disappointed.
Perhaps because it was an in-stock product, additional products were ordered.
I hope the product is in good condition. -------------------------------------------------- -------- Delivery and packaging status was good, but the scratch of the product Until application But my efforts and time It's a waste. I ordered it because it was a good brand around, but I was disappointed. The additional product ordered is because it is inventory. I look forward to the good product condition. Powered by Google Translator
View detail
Processing required
Installation is by a single Screw in front of the OEM Under Cowl and double-sided tape on the SIDE.
ExactlyDouble-sided tape does not feel like it sticks, so I drilled a hole and used Tie Wrap to hold it in place.
It was like we had to do something creative to stop it.
View detail
I think the things are outstanding.
In my personal opinion, I enjoy how the shape changes from NORMAL because of the two-layer structure.
The upper rear part of the foot rises backward about 3cm to 5cm, and the upper rear part rises backward as well, making the foot look more like a racer from the side. The increased area also makes it easier to get a good knee grip.
Carbon eyes were selected for twill weave.
It's just beautiful. It's great to be able to still have a good looking sc59 that is getting old.
Installation is not so difficult, as it is just a matter of using the double-sided tape already installed on the back side of the product and then snapping it in place.
If you are looking for looks and ease of holding, this is the one to choose.
However, the delivery time is very long. It takes from six months to a year. Only those who can endure the long delivery time should purchase this product.
The company's efforts have made it one month earlier than scheduled, but five months is still a long time to wait.
View detail
V-max 1700 under cowl(Twill Carbon)
I ordered it on June 25th... I received a reply that the expected delivery date was October, but I received it approximately 5 months later. Unfortunately, the customs clearance process was complicated, resulting in additional costs and additional freight charges. View detail
Wind pressure prevention, mounting △
as per Title
Nothing wrong with wind pressure protection.
However
Part of the Screen interferes with the Brake tank on STD Handlebar
Light interference when changing the angle of the Handlebar.
Therefore, I changed from STD Handlebar to one with an increased BEET aperture angle, but I could barely get it to a position where it did not hit the tank when the Handlebar was turned off.
Screen and Brake tanks with some Clearance.
In the end, the Handlebar will only feel pulled back, and there will be no height flexibility at all.
Are you sure it's for a specific car model?
The build quality was solid, but the finish around it looked a little crude.
View detail
I am generally satisfied, but I would like to have a larger size.
I like the affordable price and the Grip feel and have purchased several times now.
The size is one size, so depending on the vehicle, one piece may not be enough.
View detail
Not very well finished!
Waited for several weeks (Months), but disappointed with the finish!
There is 1 ventilation "scoop" right in the middle of the right and left piece with unclear, irregular contour cutting and lack of varnish on the cutting edge!
Dear, quite long delivery time, disappointed! But after paying the item price, shipping cost and import taxes! I will lose the amount of quite high import taxes! -------------------------------------------------- -------- Waited for several weeks (months), but disappointed with the finish! There are 1 "scoop" of ventilation in the middle of the right and left room with a clever, irregular contours cutting and gaps of varnish on the edge of cutting! Dear, fairly long, disappointed delivery time! But after the price of the item, paying shipping costs and import taxes! I will lose the amount of fairly high import taxes! Powered by Google Translator
View detail
Mounting Large Change
I had a bad feeling about this because there was a hole in the corrugated ball when it arrived, but as I expected, the packaging was not good enough and the corner of the cowl had made a hole in the corrugated ball. I decided to return it and use it as it was since there seemed to be no replacement for it.
I thought 30 minutes to an hour would be enough for installation, but I struggled because the Bolt holes did not fit.
The right side of the washer was fine, but the left side could not be installed due to the thickness of the nylon washer, so it was installed without the washer.
There is a slight gap in the cowl of the car body that is not ExactlyFit, although it may be an individual difference.
ParenthesisIt was a little disappointing because it is a good Part.
View detail
For Screen Fixation
I was wondering if it could be used to fix the Screen? I was wondering if it could be used to fix the screen, and since the price was reasonable, I decided to purchase it.
The thickness did not seem to be long enough to be subtle,
Length difference eachQuantity:It is nice that the selling price is not that much for 5pcs., with Washer.
It will be used in other fixed components.
View detail
Bolt position did not match and could not be installed without some modification.
Additional Impressions.
I read in other reviews that it can be installed with just one bolt, but I'm not sure if mine is an individual unit or not, but I had to modify the position of the bracket in the image to shift it, otherwise the bolt position would not be correct and I could not install it.
Anyway, as for the Magical, there are many things that cannot be easily installed, such as some kind of modification, gaps, or strange clearances!
On the contrary, it is poorly made! And too expensive!
Mr. Magical! Please take a good look at your impressions and feedback and make a good product!
View detail
Magical racing tank side pad (Cover)
Installed on 2022MODEL.
I installed it to try to reduce the Silver component.
As for the product, the reverse side is solid, made according to the tank's curvature, and the included instruction manual made it easy to install.
View detail
Style good
The design is very good, although it depends on the individual. View detail
be a bit irritated
The Frame cover is a standard Frame cover, so after running and warming up the Frame, you can simply degrease it and apply it quickly and easily.
The function of reducing the heat of the so-called Frame has been achieved, but …...
The cooling Duct, which is a feature of this product, is quite raised here, so something lumpy asserts its presence during Step work. (I am) It bothers me quite a bit, it doesn't bother me when I'm Touring and driving straight.
Also, when you are stuck in a traffic jam, you can only feel the hot air coming up from this hole in the opposite direction, which is a pity Point….
During driving, I have the impression that driving air is sucked out of the Rear cutout by negative pressure, rather than being drawn in from the Duct.
So, although the holes are cool, I can't help but feel that there could have been a little more done to make it more functional.
View detail
If only the accuracy were a little better...
The OEMFender removal was a little Large weird, I bought the FRP one and it looks perfect, both in texture and looks!
However, the position of the hole on the License Plate is not the same as that on the Quantity:Pair (for Left and Right) It was not symmetrical, and the Fender itself moved up and down with the supplied Bolt, so a little ingenuity was required to install it.
View detail
Fits: BMW K1200RS, HONDA CBR1100XX SUPERBLACKBIRD, KAWASAKI ZRX1200S, KAWASAKI GPZ900R, YAMAHA TMAX500, BMW F650GS, BMW F650GD, Others
Moving parts.
GPZ900R with Super long I installed it with the Bracket. The view is not as good as the later Mirror, but it is better than the earlier Mirror. The middle Elbow had to be fixed once the position was decided. I thought this part could be movable, but unfortunately, it was not. Also, I changed the screw from a regular silver Hexa to a black-dyed Stainless Steel Button Screw. View detail
This is...
About 12 more months of waiting! (LOL)
Magical Racing CaliperCooling duct
Bolt1 pc for the fastening bracket and Tie Band for the rest. (Tie Wrap) And there is a bit of uncertainty....
View detail