Reviews
[Note] Note the manufacturing period and initial defective products. (Rear Sets_CBR250RR)
The SerrationPitch that fastens the Shift rod to the Shift shaft contained completely different parts.
It is believed that the parts were assembled incorrectly, but it is necessary for the purchaser to confirm this as soon as he/she receives the product.
Also, it takes about a year and a month to ship and arrives when you forget about it.
If you are struggling with other options, I would recommend that one.
View detail
Compared with the product of the other company, a price is cheap. Since the construction material of a product is iron, rust comes out very well. Moreover, I thought how the point which welding of the hook portion which hooks the spring for brake
Compared with the product of the other company, a price is cheap.
Since the construction material of a product is iron, rust comes out very well.
Moreover, I thought how the point which welding of the hook portion which hooks the spring for brake switches at the time of attachment had to be piled too much, had to interfere when operating a pedal, and had to be deleted with the belt sander was.
For the reason, I used evaluation as three stars.
View detail
It chose by appearance serious consideration. A problem is high ... Furniture of a position is good. If * free fall is carried out at the reference which is the height 170, it is the structure which is likely to die simply. Hear Hear, it c
It chose by appearance serious consideration.
A problem is high ...
Furniture of a position is good.
If * free fall is carried out at the reference which is the height 170, it is the structure which is likely to die simply.
Hear Hear, it carries out -
Attachment was also attached satisfactorily.
Because there are also bad goods made occasionally.
View detail
It chose by appearance serious consideration. A problem is high ... Furniture of a position is good. If * free fall is carried out at the reference which is the height 170, it is the structure which is likely to die simply. Hear Hear, it c
It chose by appearance serious consideration.
A problem is high ...
Furniture of a position is good.
If * free fall is carried out at the reference which is the height 170, it is the structure which is likely to die simply.
Hear Hear, it carries out -
Attachment was also attached satisfactorily.
Because there are also bad goods made occasionally.
View detail
It chose by appearance serious consideration. A problem is high ... Furniture of a position is good. If * free fall is carried out at the reference which is the height 170, it is the structure which is likely to die simply. Hear Hear, it c
It chose by appearance serious consideration.
A problem is high ...
Furniture of a position is good.
If * free fall is carried out at the reference which is the height 170, it is the structure which is likely to die simply.
Hear Hear, it carries out -
Attachment was also attached satisfactorily.
Because there are also bad goods made occasionally.
View detail
I think it's a preliminary question of installation knowledge.
I didn't buy it here, but just to warn prospective buyers.
It's amazing how far we've come. It's supposed to be an exclusive product, but it doesn't come on at all intact.
I had a motorcycle shop install it for me, and they laughed all the way through when I explained how I installed it. I had a motorcycle shop install it for me, and they laughed at me the whole time when I explained how to do it. I will replace the footpeg with a Fixed Type.
View detail
It takes skill, knowledge and patience.
As others have mentioned, it can only be installed with Reverse Shift (I prefer Reverse Shift, so no problem), but the parts were defective and it took 3 months + 1 week. The shift rod is too short, so there is no adjustment range at all. 225mm rod was used, but I need 20mm to 30mm more to adjust the position (I bought it separately).
(e.g. "I'll be back")
The products are not well finished, such as BALI and Cutting Wound, but the evaluation is not bad due to the price and the fact that there is no other choice in Motorcycle made in 1987. However, I would like to see a version up.
1987 vfr750f RC24
View detail
Don't you want to be made-to-order from the start?
I ordered this item in October 2020, and as it is a Made-to-Order item, I am informed that it will arrive in about 3 months, around January 7, 2020. However, on the day of January 7, I receive an email saying that the new arrival date will be around the 14th, 7 days later. When I inquire about it, I get an email saying that it will be delayed by one day, and then on the 15th, I get an email saying that it will be around the 22nd. Initially, it is a non-cancellable item, but it becomes the possibility of cancellation by the reason of delay. I was so disgusted that I cancelled it. It smells of crime. View detail
Brake is the problem
I installed this pedal on my RZ250RR. It is easy to install, but the brake effect is weakened. compared with OEM brake pedal, the pedal of McCrane is shorter and the lever is weaker, so the force to push the master cylinder is weaker. View detail
Almost exactly as it was then
I used it on my old GPz400F
I think that the spec. has been changed a little bit from the original one (the footpegs in those days were (Rubber coated) Still, it's a distinctive "iron" I think it's a bit too nostalgic for the Z1 But somehow it looks good on the Z400FX and other middle sizes It's one of those items that feels right
They still sell new ones, and they still include a handwritten Instruction Manual When you take Repair Parts, the design is slightly different He's a fun manufacturer
View detail
The Problem Before Accuracy
When I ordered and waited almost a month to receive and install the product, Master Cut into the Bolt hole and Footpeg Holder on the Cylinder mounting Bracket One screw hole is off by one bolt and cannot be installed
We didn't have time to send it back to you, so we had to ask a company to fill in the holes and reprocess the screw pile, which was a waste of time and money It took Gold
View detail
It wasn't exactly a pimp
Maybe it's because it was a Type 4 instead of an Initial Model, but the Bolt was very short or the clearance of each part is not right, and you have to deal with it by Washer or long bolts After that, GEAR, which was hard to get into due to a defect in the OEM Shift rod, was introduced After that, GEAR, which was difficult to get into due to a flaw in the OEM Shift rod ScauperScauper will be able to enter and is Large satisfied View detail
Miscellaneous
Purchased as new Installation is easy The product has a pretty rough surface, scrape marks and BALI I thought it was going to rust, so I waxed it with Towel to prevent rust, and Towel was pretty much on BALI It gets stuck Also, I don't know if the Shift rod is defective or not, and the screw thread of ROD is shallow and the E-sert is It was necessary
I was disappointed that I paid over $3,000 for this
I will never buy a Manufacturer's item from them again as they are quite crappy to make
View detail
You can still buy them
It is installed in GK76a I thought it was discontinued due to its age, but it was delivered in one week
It is the cheapest manufacturer in terms of price with no used ones to be found, but I am satisfied
View detail
It is a little disappointing....
Shift side is satisfactory satisfactory. However, there is a problem on Brake side. When I step on Brake pedal, Brake Rod has broken and the effectiveness of Rear brake is very bad. I rely mostly on Front brake and driving..
Also, because of Steel, it is easy to rust.
I think I will return to Normal step soon.
View detail
It is not for VFR 750f RC 36, but I managed to put it in somehow!
Shape is Parenthesis nice, but explanation is bad! I am running with it, but the master cylinder cylinder is still not working well.
Bolt can not be used briefly, so I went to Driver Stand and bought it!
Although the position of the hole is correct, the Plate shape of Rear Sets does not match.
As a result, I bought it for Bosch Color!
View detail
Appearance Cool
The price was a little expensive and I was considering it, but it was somewhat easier than Sale
I bought it boldly. The installation time was around 2 hours and it was possible to install it without any machining.
View detail
Design
Mac Crane ☆ old-fashioned Brand item
I also made firm, I do not get tired Design !!
Despite this Rear Sets ~ old motorcycle
It is amazing that stocks are in stock !!!
View detail
Aren't they 100 points when being attached, even if it does not use a special tool?
Aren't they 100 points when being attached, even if it does not use a special tool? View detail
This product that there is no goods picture, and Manufacturer HP does not have, either, and is written to be only VFR750F (FOR JAPAN MODEL). Although there was no notation of RC24 or RC36, it purchased, when it would be an object for RC24, since it w
This product that there is no goods picture, and Manufacturer HP does not have, either, and is written to be only VFR750F (FOR JAPAN MODEL).
Although there was no notation of
RC24 or RC36, it purchased, when it would be an object for RC24, since it was a Manufacturer with much lineup of an old vehicle type.
goods arrive and plating treatment is carried out to the Steel Plate as opening and the notation.
Probably, it is good, since it is not visible if it attaches although the
cutting plane has melted.
The thing in which starting [ that it is short ] is [ the Bolt which attaches the
Plate ] somewhat shallow is worrisome.
Since the
Brake side exchanges Push rods, a Snap ring pliers is needed.
, the Change side.
It cannot construct as the
description.
The ROD of the
Change interfered in a Frame and the head of the Cap bolt.
Although it was able to construct in
reverse Change, a device is likely to be needed for using a right Change.
It can attach with RC24 as a result of
.
I do not know whether it is
individual specificity and whether in fact, it is an object for RC36.
About the
goods themselves, the price is moderate, and a Design is also rather good.
Although there is a point which calls it
structure or is worrisome in the size of details, since it is a certain Manufacturer for many years, it will be OK.
View detail