Reviews
Good as Helmet for delivery
I bought the matte black color for a delivery job that requires a lot of taking off and putting on. Since it is a half helmet, it is recommended for use with motorcycles under 125cc, but it is not against the Road Traffic Law to use it with motorcycles over 126cc. However, safety is reduced, so use at your own risk. The fit is a large size (M size), and it gapes easily when there is an impact, but not so much that you can't see the front or that it comes off. It does not gap so much that I can't see the front or take it off. I used double-sided tape to hold it in place because the interior mesh fabric floats and gapes when you take it on and off. When I put the helmet completely on my head, my large ears break inside the ear pads, but it doesn't hurt. The Shield is not designed for use with Glasses, but it is not impossible at all. [Color] The Bubble shield is a little distorted in the view, but it was acceptable.:Pair (for Left and Right) If the screws of the shield are loose, the shield will remain raised and will not stop, so it is necessary to retighten them. Wind cutting noise is heard, but it is good as it suppresses speed. The Chin strap is convenient because it can be released with one-touch. I am satisfied with it for my delivery work. View detail
I bought this for my motorized bicycle only.
Buy LLSize
Reason for purchase:I was looking for a helmet that I can wear when I go shopping in the neighborhood with my CUB or Scooter. The helmet with sun visor is a pass because the cap is too large, and the cheap helmets with sun visor are not good for me.
General comments/Considering the price and the finish and quality, this is a good Helmet for use on a motorized vehicle.
Good point* It also has PSC/SG in case. it is ABS cap, so I don't care to use it for motorcycles, even if it is good enough for motorized vehicles.
If you buy a Japanese hat, you will be disappointed because ARAI, SHOEI, and OGK are made with the head shape of Japanese. You need to adjust the interior by yourself after buying.
The one-touch chinstrap is good, but the width of the chinstrap is rather narrow (20mm), which is not so good if you are used to ARAI, SHOEI, or OGK, which have a standard 25mm chinstrap.
View detail
I wonder if it's worth the price.
Size:It's Free, but it's a Large size. I usually use size XL, but there is plenty of room.
The build and interior are well-priced. Wind noise is also quite loud.
Ventilation doesn't work either, like a bonus.
I like Graphic and use it for a little ride!
View detail
one's size (as opposed to one's size in general)
Size 57cm, too large for my size medium.
The included sizing pad is not sufficient and is used with a hat.
The quality is adequate for the price. The only thing is that the V-section next to the chinstrap does not fit well.
I think this is a good product for sticker tuning and summer street driving.
View detail
![Shield [for RX-200R].](https://img.webike-cdn.net/catalogue/images/78742/RX-200RS_TS.jpg)
About Dark smoke
I use a Bell Helmet when I go Touring, but I use a LEAD Industries Helmet when I want to ride Motorcycle in a Showa era atmosphere. If you ride at night, you should definitely not use Dark smoke. It is quite dark. It is nice and not glaring in the mid-summer sun. I can also recommend it to people who don't want to show their faces. (Laughs) View detail
The density is moderate.
[Color] With Clear, there are times when it's just too dazzling. [Color] Changed to Smoke.
It is also reasonably priced.
I'm thinking of using it at dusk, too, in the middle of the day. [Color] Smoke.
It is not intended to hide the face, so it is moderately thick.
View detail
Too bad there is no SSize.
I was using S Size in RAZZO? I tried to buy the same one, but it was a cupboard.
A similar Design has been released, so Size:I thought Free would be a Large size, but I bought it.
I will try to put a thicker sponge in it.
View detail
Size:Free needs attention
The Helmet I use for my daily commute to work is now over 3 years old since I purchased it, so I bought a new one.
Since it is a commuting helmet, it is not an expensive helmet like ARAI or SHOEI.
I was looking for a Helmet that would be okay if it got scratched or worse, stolen.
I bought this one because it was a Graphic model for a low-cost helmet and looked like a 20-year-old SHOEI.
I won't go into details because the details are pricey, but Size:You should think of Free = L~Size XL.
I am usually a S to M size and the large size was too tight for me.
There is a Pad in there for Size adjustment, but I think it is a comfort.
I decided to buy a lower-priced Helmet with a size designation next time.
View detail
cursory things
I bought it for the time being.
It's a nostalgic way to wear it.
There is no Fit feeling, etc.
It's just for city driving.
More than adequate for the price.
I would not recommend this to anyone who is nervous or looking for Speed.
This is for those who want a full face.
View detail
I think it's in good shape, but I don't know the right ga.
In my opinion, there is a gap in the front and rear, which is the ideal shape for the concept of Duck Tail.
The only problem is that the Y-shaped chin strap does not let your ears come out, but rather covers them, so your ears may hurt when driving. That may be the drawback of the most Large.
View detail
The good ones are for city driving only (laughs)
American people. "I'm wearing it. It's not Duck Tail, but the hat is taller, so I guess it's between a half-helmet and a Duck.
This LEAD is cheap. And I think it is because it is PSC,SG Standard product that the interior and the buckle of the belt are solid for this kind. However, it does not have impact resistance. "125cc. It is said to be used below. The 125cc of nowadays goes out 100 km lightly (laugh)
Decorative Half helmet Duck Tail Brand:MOTOBLUEZ $6,490 (tax included) I wonder what it is. https://www.webike.net/sd/24602537/
"Ornaments" The two interior and buckle points are particularly poor on the one sold as the Shell, and the Shell is thin. "I feel like I'm wearing it. bark "I'm wearing it. It seems to be more durable than the LEAD industry which is also sold in the home center when compared with it.
However, if I had an accident like this, it would be the end of the world. My face would be a mess (laughs).
It's better than nothing.
Because my ears are sticking out, the wind noise is so loud that if I was doing 60km/h on a 50km/h road, it would be loud. The reason why everyone is able to fly with this is because they are used to it. I can't do it because I usually use SchubertHelmet which has excellent quietness (laugh).
Also, it's still very scuzzy. I know some people have complained about these two things on AmazonReview, but they should be obvious from the looks of it (LOL).
However, for a 10 to 20 minute ride around town. "Rak." (LAUGHS)
Touring is impossible with this, but this is enough for me because I bought it as an emergency bag that I can keep in my side bag. But if you want to use this as your Main, you should only use it for motorcycles (lol).
explanatory note
I thought, "Huh. I thought, here, not Black, but a subtle Black metallic, that's what it said (laughs)
Well, it's not sparkling, so I guess I'm safe (laughs)
View detail
![Optional shield [for reise]](https://global.webike-cdn.net/photo/impression/60/60379c40d5b3e1a74e83587f1d7e909dL.jpg)
First Mirror
LEAD's Shield for reise (REIZEN) is available in Silver mirror or Standard Equipment. [Color] Two options for Clear.
Ever Soft (semi) [Color] I've never used a Shield thicker than Smoke and was happy enough with that, but the price was cheap enough to give it a try.
Well, I'm impressed that the glare is reduced and I can't even see my face at all.
Just install the Quantity:Pair (for Left and Right) It's a little difficult to adjust the position while matching at the same time, but it won't be a problem once you get the hang of it.
View detail
For street riding Motorcycle only.
I bought this for my motorcycle for street riding only. The fit is good and it's easy to put on and take off. View detail
It's easy to wear.
It's not as safe as a full face, but it's very convenient for long distance use. This is a solid manufacturer's half helmet and I use it when I ride my scooter. View detail
Present to the family
I bought this for my father who sometimes rides a scooter.
Until then, I bought the Size from Home Center.:I was wearing a Free Interior Pe LePera Helmet.
I bought this one because I thought it was still better.
But to be honest, the texture is about the same etc. or slightly better.
The Helmet is probably ARAI or SHOEI, after all.
View detail
I'd be willing to pay the purchase price
The last time I had a LEAD Industries barton series, it was a LEAD Industries barton series, so the size feeling is the best LargeBought it to be sturdy and
I did It's not bad, though it's a bit generous
The last one is three years old and the rim rubbers are peeling off and have been replaced
I'm using it at 125, but I've been using it up to that level of Engine Displacement Volume is a good idea
There is an air insertion opening in the front, but if you look from the outside, you can see the inside of the White In addition, when I take off my chinstrap, I have to take it off, but in that case, Belt is getting looser and size will be adjusted It's gone; no rattling of the Shield I'm convinced that it was a cheap purchase in general
This is a good product to buy from HertzCenter It's a good product if you think the actual price is a fair price
View detail
Goggles decorate
Making Goggles is very cheap.
The inner Cushion nature is very weak, so an accident will probably die.
I do not use it except when I go to the neighborhood Convenience.
View detail
Can you price it?
I purchased Smoke Shield this time and attached it to SJ-8.
I feel the density of Smoke is thin, but the glare has been greatly alleviated.
It was a pity that we had trouble in installation. Shield shape (How bent? But
It was quite different from Shield attached to Helmet.
I managed to install it, but Shield does not get down because of the above distortion.
Well Helmet itself was inexpensive, so I got it so it would be something like this.
View detail
It is a Base for fixing the Shield portion of the Jet helmet with a Bubble shield of a LEAD. It exchanged together with exchange of a Screw. As a required Parts, a price is also cheap, and attachment is also easy. Since appearance only carried out
It is a Base for fixing the Shield portion of the Jet helmet with a Bubble shield of a LEAD.
It exchanged together with exchange of a Screw.
As a
required Parts, a price is also cheap, and attachment is also easy.
Since appearance only carried out Plating paint application in fact at the Plastic although seemingly it was metal, it is clearly cheap structure.
since it is merely exclusive elegance, it is satisfactory at all to the function itself -- it is .
View detail
Although the Jet helmet was used with the Helmet for commuting, it decided to tear inner package portion to pieces, and to buy it newly this time. if cheap about 5000 yen Helmet is looked for since it is an object for commuting -- -- this He
Although the Jet helmet was used with the Helmet for commuting, it decided to tear
inner package portion to pieces, and to buy it newly this time.
if cheap about 5000 yen Helmet is looked for since it is an object for
commuting --
-- this Helmet was found.
Somewhat tight one and
Shield hardly open and close the stuck comment, and they are hard. [ of Shield ]
Since it is
, if COSPAR can think, I will think that *3 is appropriate.
View detail