Reviews
Cheap, but difficult to stabilize
I thought I could hold the four corners of the phone in place, but it was rattling.
There is too much rattle and I'm afraid my phone is going to fall out while driving.
I can't use the Tie Wrap without feeling like I have to.
There are also gaps at the top and bottom, but that's part of the structure. 。 But I think there are too many gaps.
If the Motorcycle is not subjected to sudden vibrations or shocks during street riding, is it barely usable?
But maybe I shouldn't complain because it's cheap.
I think it can be used if it is fixed firmly with Tie Wrap etc.
View detail
Practical and useful.
Bicycles and Motorcycles also make me thirsty just riding them!
I don't know many people who have them on their motorcycles.
Having a Drink Holder is still useful for something!
Which Pipe part would be the most comfortable to install?
We're working on it.
View detail
It's heavy... so it's good, right?
It's my first time owning one of these, and my first impression is that it's so heavy.
The feeling of use is GOOD because it is a simple key.
It's only for home use, and I would have left it there anyway, so I wanted a longer one.
It's a place where you can't earth lock, so Motorcycle Cover and Quantity:I'd like to use it in Set to have peace of mind, I think.
View detail
![[iMMER] Smartphone Holder](https://img.webike-cdn.net/catalogue/images/73029/ks257A474400_TS.jpg)
SimpleHolder
Bought this to mount my phone around the Handlebar and use the Navigation feature.
In order to cover the general Handlebar size, two kinds of collars for Size adjustment are included, and it is used after it is attached.
It looks SMART and holds the phone firmly in place, but you may want to purchase an additional thin Rubber sheet to prevent scratches and color slippage on the Handlebar.
The only way to secure your phone is with the Clamp mechanism, so I'm gonna fall on impact. It is not suitable for the person who is worried about it, but I think that it is not a problem because it does not falter even if it gives a considerable shock.
View detail
Purchased with interim implications.
The plastic ones are a bit weakly made, even if they are convincing.
It is difficult to understand the fit between Case and Bracket, and Case flew once. (Fall Prevention Strap is required.)
Don't put too much pressure on it.
Cost is good for both price and work, maybe enough for people who don't have a lot of pressure to run.
View detail
Purchased with interim implications.
The phone is not exposed and has a Fall Prevention Strap. (Plastic)
It's not as hot as they say, maybe good for the winter/rainy season.
Not a bad product if you're willing to accept the pros and cons.
View detail
It is easy to install
This Drink holder can be firmly attached to the Handlebar and is very stable and usable. The angle can be adjusted freely, and it can be installed and removed easily because of the Large type hand crank screw. View detail
It needs a lot of work, but it's a good cosmetic. (I wonder?)
First, I had to cutters to fit the optional Smartphone Holder. In addition, when I used it for several months, Button of Holder release did not work, so I Rose and Grease up. It is necessary to work on various things, but the cosmetic is not bad. View detail
Your phone will heat up in the hot sun.
When we considered buying a Smartphone Holder, we chose this product because it has the least chance of falling and can be used in rainy weather. However, in the hot summer sun, your phone will run out of heat and fall off after just a few hours of running. (Because there's no cooling air.) Because I can't do anything, I buy Open Type's folder in addition and use it when the weather is fine. I think that there is "some" if I can divide it with Holder only for rainy weather. View detail
If you're not wearing your phone, you're going to freak out.
I first bought the Full cover Holder for rainy weather, but my phone runs out of heat in hot weather, so I bought an additional one for sunny weather. The Hold function of the phone etc...the basic parts of the phone are fine, but the vibration freaks me out when I don't have my phone on. When I don't have my phone on, I remove the Holder itself. However, I don't think it's a bad cosmetic product. View detail
I'm glad I bought it
I bought it at the same time as the Navigation System Case KS-212A and installed it. I was worried that it was not fit to KS-212A, and it was written in the review of other sites that it was cut down a little.
I wanted to have a place to pass the Wire or something to prevent it from being dropped or stolen, even if it's unlikely.
View detail
Maybe it's a good costumer, but...
I bought this for Navigation when I had to go away on a rainy day. I had a Ram Mount smartphone holder attached to it and I was able to install it to my phone. I did. When I was running while charging, the heat inevitably made it hard to see, but when I opened it up, water was coming in... It was a very good experience. View detail
This is going to be tough to break. (Guess what?)
[Intent to purchase]
I bought a new car so it wouldn't be stolen.
Product Description.
Three keys are included.
The keyhole has a drip-proof cover.
【Impressions】
A good place to buy a 2020 ADDRESS 110, but not a very safe place. But it's not there, so I bought it so it wouldn't be stolen.
The moment I received it and held the box, I was shocked at how heavy it was.
However, it is not suitable to be carried in the Top case due to its weight.
Three keys are included, so you don't have to worry about losing things, even if you often lose things.
One in the Key Holder, one in the Wallet, and one in the house for storage in a complete stance.
As for the installation, it's a bit of a hassle to install the U-shaped Gold, which is attached to the Chain at both ends. The lock is then pushed into the lock part and locked.
Depending on where it's installed, you may need three arms to turn the key while holding it down with your hand. Often times.
It's been a while since I started using it, but I don't know if the inside of it is getting rusty or not, even though it has a splashproof cover. The key has become very hard to turn around and I'm not sure when the key will break.
If it gets rusty and won't come off …
This is going to be tough to break. (Shudder.)
View detail
I think it's a passing grade
I install the rubber sheet on the Brace bar and use it Wrap it around and pinch it in the Sleeve and close the Clamp to secure it to the Brace bar The Clamp should be movable between the Sleeve and Clamp rather than completely fixed It seems to be designed to increase the range of motion of the phone in
The construction of the Parts that hold your phone in place is more solid and sizzlingly heavy than I expected It looks reliable
I tested it by cruising 100 km on the highway, but the problem of the screen is hard to see because of the shake There was not
I am not sure how long the product will last due to the plastic clamps
View detail
I'm sure you'll agree with me when I put it in there
There are a lot of these products out there, but are they really not falling off? I couldn't get it out of my head
So, I'm using "Galaphone We found our product when we looked for a folder that is compatible with
The price wasn't too high, so I bought it to try it out
I received the product today and I pinned it down as soon as I could, lol
The result is a GripArm attached to the GripArm that clamps a mobile phone (phone) We found out that it can be fixed firmly with the Cushion material
Also, when you remove it, you can press the Release button and you can remove it without any difficulty (I only hope that this function does not become an enemy...)
It is easy to join to the Exclusive Bracket (sold separately)
However, from the clamp part to the holder part may be too long If screw is not tightened firmly, the screen seems to turn to a terrible direction by deceleration Getc
View detail
I wonder if it's good for the price
LEAD Industries' "Glass Maholder I bought this for the installation of the
If it was about $2,000 for the Holder and Bracket, it was a trial run
When I actually installed it on the Motorcycle's Handlebar, it looked like it would hold it in place It is However "Chica La will be required, though (laughs)
I'm looking forward to attaching the Mobile phone to the Holder and running it for real
View detail
![[iMMER] Smartphone Holder](https://global.webike-cdn.net/photo/impression/7e/7e9011117d0e364f05d308e72e9e0416L.jpg)
Retention is high
I was worried about falling because there was no catch on the bottom side, but I apologized and left my phone on and Dirt I didn't fall down when I ran
I am satisfied with it because it is inexpensive, Compact and looks the same as the Large
View detail
Used in place of a chain lock key cylinder
Chain lock from LEAD Industries (https://www.webike.net/sd/) (1335306/), but after about three years of use, Key cylinder I'm using this product instead of a replacement key cylinder
Because it was originally designed to be used as a disc lock, the U-shaped part is a little long and the It is a little inconvenient to use it as a chain lock
Other than that, I have no complaints about the price and the build quality is sturdy and sturdy
View detail
Large texture
I was wondering if the size of the bike was too big for a small type motorcycle, but I thought it was a good idea to cover it with I tried and it was covered tightly!
I think it's easier to put on a slightly larger size than the right size
I don't know much about durability and use as I just started using it
View detail
It's not ideal
As a product, I don't have any problems with it at all I feel that the product is a bit cumbersome to put on and take off the phone because it does not come off easily The product is stable and in good condition when installed View detail