Reviews
Cospa best
Transfer to a vehicle without Grip heater,
I bought these because my fingertips get cold even with winter gloves.
Installation is easy, anyone could do it in 5 minutes.
I was worried that the Handlebar Cover would be difficult to remove and insert my hand.
This product is well molded and does not get stuck when you put your hand in it.
The feel of the controls is fine for Lever, but Blinkerretc. is a bit difficult to press.
I used it for touring on a day when the temperature was below 10 degrees Celsius during the day.
(I would say (with summer gloves) not quite warm, but not numbingly cold.
Grip, I feel like I've been freed from the worries of choosing Gloves.
View detail
Blinker is hard to operate.
We had been using Komine's Neoprene fabric, but it was deteriorating badly over time, so we decided to replace it.
The previous version had a large hole in the Grip section so that the BlinkerButton could be inserted into the Cover, but this version does not allow it.
When I try to operate the Blinker through the Cover, it presses the HornButton.
My Motorcycle is a 2019 HondaCB650R
I don't know if it's because the BlinkerLever and HornButton positions are reversed on recent Honda Motorcycles.
View detail
Good Cost performance
I bought it early because I knew my hands would get cold when I commuted to work.
I use Summer Gloves because the Blinker is tough to operate with the heavy Winter Gloves. I have been using it for about 3 weeks, including rainy days and extremely cold days, and I have no problem at all on rainy days; I can only feel the coldness of the lever because it is Summer Gloves, and I have no problem putting my hand in and out, which was my main concern. I was considering purchasing electric heated gloves, but I think this Cover will get me through. I am concerned about some details, but considering the price, I think it has excellent cost performance.
View detail
Very warm, but Brake return is poor.
I installed it on a PCX125 Initial Model.
I have been using winter gloves for winter, but my hands get cold after running for a long time with them, so I decided to buy these for a trial run, which are less expensive than electric gloves and grip heaters and seem to be more effective.
The installation itself on the PCX125 can be done without any problems.
However, since the return of Brake will be slower, there may be times when Brake is applied without being noticed.
I can't say it's all due to this product, as I also have a knuckle guard installed, so maybe that's having an effect...
The effect was quite high, and even at this time of the year in December, I had no problem at all with just one thin Gloves.
If the temperature becomes so cold that I feel cold even with this, I plan to use it with hot hand warmeretc. but I am satisfied that it has been more effective than I had expected.
View detail
feel of using
Good product. I'm glad I bought it. View detail
I should have put it on sooner.
They provide more protection from the cold than any expensive Winter Gloves.
In the middle of winter, a Handlebar Cover + bare hands is totally fine, but I always use a Handlebar Cover + Grip heater + military gloves.
Clearly, only the hands are a different world.
It works fine even on rainy days, and I think the inner boa also works well.
View detail
mild
I had been driving with regular gloves and the wind was cold and hard.
Driving with the Handlebar Cover on made me feel comfortable like a lie.
View detail
Easy to use
Easy and convenient to install.
The thermal and waterproof performance is solid, so your hands won't get cold in the winter.
The Handlebar Switch is very easy to operate despite its compact design.
View detail
Isn't it limited in its usage?
I put it on my ct125CT110 HUNTER CUB. It is warm inside. I don't know about the waterproofing because I haven't used it on a rainy day, but it is well made.
However, because it is compact, the clearance in the Cover is limited. Because of this, it interferes with the brake lever, and when you pull the Right hand a little forward with the Handlebar flock in the Left hand, you can't get it to work. "Chica Chica." and the sound of the Brake operation is heard. A similar Right hand inward pulling motion also causes the Brake to be applied.
I have no complaints about the Stylish look, but I would like to replace it for safety reasons.
View detail
Better than the common For Scooter Han Cover made of Neoprene
Bought this for my Scooter (JOG APRIO). (For some reason, I can't select it from the vehicle type used on the posting screen)
So-called "Motorcycle" I'm of the school that thinks that the Handlebar Cover is easier to use if it is the Large type that can fit the Switch box inside the Cover.
Large type is also better for Scooter, but Scooter has Blinker on Handlebar part, so such easy to use Handlebar Cover is almost useless.
Before the law, not being able to see the Blinker from oncoming traffic is a matter of life and death.
For Scooter's Small TypeHandlebar Cover is generally made of Neoprene which is sold by large companies such as DAYTONA, Komine, and Rough & Road, but this is made of waterproof cloth.
If Neoprene is made of Sponge, this is made of Vinyl.
It looks kind of low performance, and it's not really cheap, so it probably won't sell, but sweet!
The good thing about this is that it's made of cloth, so it's not very rigid as it is (although it's quite hard), but it has a core material instead.
It doesn't need to be shaped with Material stiffness like Neoprene, so it has more room inside compared to those.
Throttle is easy to operate, and if rainwater seeps inside, it's hard to come into contact with your hands, making it much more comfortable on rainy days.
Large can also be Small, but Small can't provide the performance of Large.
It's the same Large size, but don't let it fool you.
Not only this Cover, but also the Small TypeHandlebar Cover for Scooter which can't contain the Switch box has a common weak point.
It's mainly a Blinker operation, but it's very hard to do, not just with this product!
So, I sacrificed cold and rain resistance to cut out the cloth of the control part, and made a hole where Gloves' fingers can directly control the Switch.
Yes, it's cold, but it's better than being annoyed every time you operate the Switch.
It's a moped scooter, so there's no way I'm going to ride it that long, and I'm more concerned about maneuverability than air gap.
It's about twice the price of a standard cheap For Scooter Handlebar Cover, but if you're a daily commuter, I think this one will save you a lot of stress.
It's definitely better than being stingy with the $2,000 and riding in frustration all winter.
View detail
High life expectancy
I think the quality is very good at an easy to purchase price. The brightness and whiteness are sufficient and it is very bright and easy to see the road conditions even when driving at night. Now it's just a matter of durability, but I'm hoping for a long life. View detail
This is a winter staple.
Despite its compact design, the Handlebar Switch is very easy to use. The Handlebar Cover is comfortable, but the appearance of the motorcycle is not as good as it could be. View detail
I'm almost satisfied.
Mounted on the Grom
Installation is easy to put on Handlebar, Lever and Mirror etc It's easy to attach it to Mirroretc
I went around the Boso Peninsula at the end of the year, but it was cold in the FOX thin Gloves that I still use from spring, summer and autumn There was not This eliminates the need for a Grip heater
I chose this product among many covers because it is decidedlyCompact It's a matter of getting used to it It's not a problem The interior is made of a boa material, but when you put your hand in, the boa gets caught It's shredded I don't think the bore is necessary
View detail
It sucks
The KSR110 New Model Valve will be H4, and the low beam
I bought a new Valve because it ran out, the Valve ran out within a day of installation & hellip; it sucks
View detail
For Motorcycle is small.
To install it we had to enlarge the hole through Grip and Lever unless we had to Large.
If you do Gloves for Motorcycle you can not operate Blinker!
Since there is no space to put your fingers, you have to manipulate the entire Handlebar Cover in such a way as to move it from the wrist.
Gloves with Protector on the back of the hand can not be used because there is no room in the height direction.
Now I am driving with ordinary cold weather gloves.
I used it for commuting about 30 minutes each way but the warmth was as expected.
I am planning to remodel it or replace it because it is problematic in operability.
View detail