Reviews
Quality for the price
Purchased for Tandem. I think the quality of the details and the texture of the product are in line with the price.
As the name suggests, Lady's size is for women or children. The interior is thin.
View detail
First Bubble shield
Purchased for color, the color alone is great, easy to see both day and night.
However, the inner reflection is quite noticeable and the pores on the nose are enlarged due to the shape.
I would like to see an anti-reflective method on the inside.
It is quite hot in summer without much wind inside.
View detail
Visibility is No.1
The vision is like the naked eye with no inner reflections and with color. It is at the same level as the naked eye with color.
However, the driving wind is also at the same level, and it is very windy to the eyes.
View detail
Difficult to use with eyeglasses.
Limit by the reverse playback of wearing the helmet when taking off the helmet, since it is not possible to wear glasses after putting on the helmet. [Color] There is only Clearance that can be Clear.
I prefer the Shield in Champagne gold with a bit more Mirror.
This color is cheaper than the others and I bought it with the points I saved so I will use it exclusively during the cold months.
View detail
Small but good looking Parenthesis
The first impression is that the cap is small in size and looks very parenthesis, and the Merit is the largest. It comes with an adhesive sponge for adjusting the dimensions, and I was able to adjust it well enough. Considering the soundproofing effect, I have the impression that it is more suitable for city driving and short distances than for touring. View detail
Good visibility with minimal distortion
Surprisingly good visibility with little distortion, but on the other hand, the reflection of one's face is strong and makes nighttime driving uneasy. The length is a little short, plus the quantity:Pair (for Left and Right) Wind cutting noise and eyes dry out at high speeds due to wind entrainment from the gaps in the View detail
For CUB
I bought this for my CUB, which I use mainly for work.
The helmet for touring is size XL, so I chose size XL as well, but it seemed a little too large.
Ratchet-type buckles are easy when there are many removals and additions.
The color was Ivory, which was darker than expected.
I like it because it has a VINTAGE feel.
I also purchased a Bubble shield from the same manufacturer at the same time, but it feels heavier when the shield is attached.
I use it separately for work.
View detail
Flash mirrorColor:Buy Yellow
Flash mirrorColor:I purchased Yellow, but the Mirror feeling was Zero.
If you want to hide your face, you should choose another color.
View detail
First Bubble shield
Purchase at the same time as the company's Jet helmet
This is my first Bubble shield.
This is my first time, so I don't know about other companies' products, but I think there is a little distortion.
But maybe this is how it is.
It doesn't bother me that much.
Even at night, it doesn't feel so tight.
As I mentioned in the Helmet Review, I feel a little thoughtful when I attach it to the Helmet.
View detail
I was able to use it for AraiClassic.
I put it on my Arai Classic. I was able to install it without any problems, but the Shield is too stiff to move up and down. You may want to use silicone oil or grease to break it in before you install it. However, it may be that the accuracy of the Button part of the installation was bad by chance only for the one I bought, or it may be that it was just incompatible with my AraiClassic by chance.
I've heard that some bubble shields can distort the view, but this shield didn't bother me. I chose the Clear type because I do a lot of night riding. I think it's inexpensive, so it might be good to have several types depending on your mood and conditions.
View detail
JAM The reinforcing Suction Cup is used exclusively...
First of all, when I bought it, I did not expect the stiffness like ARAI or SHOEI products from the price.
I chose LightGradation blue for the flash mirror, but it looks more like light smoke than gradation, and moreover, it looks more like normal light smoke than blue, is this the manufacturer's standard or Naming? Certainly? But it is the original [Color] Smoke looks like it feels much darker.
There is little distortion and it is easy to see well, and there is no sense of eye fatigue.
The impression of the lack of rigidity as shown in the comments of the past evaluators is unavoidable because the thickness of the Shield itself is thin. However, there is accuracy that is not bad considering this price range, and the impression changes completely by adding the following Parts.
I installed a JAM specific reinforced Suction Cup on both ends of the Shield installation.
With this Suction Cup, the Shield itself has been given a more solid feel, and the usability has been improved. Also, it seems to have been improved to prevent sudden opening and closing on the highway by installing a locking snap.
I tried to run near the speed limit in the highway test section of the new Tomei, but I was able to use it comfortably without any particular problems or troubling scenes.
Anyway, it can be opened and closed, and when the sun is low in the morning or evening, it is possible to prevent sobriety with the eaves, and it gives off an old-fashioned atmosphere with ease. It becomes the form of Helmet that suits Machine.
I thought it would be a good idea to have one of those Helmets that have an atmosphere that allows you to run around town with ease.
It becomes the atmosphere of Helmet that suits especially W, ESTRELLA, and SR GB system Machine well.
Recently, the JAM Helmet has come in handy when I go out after changing the Shield.
View detail
Price suitable
I bought this because I wanted a bright white Helmet to go with my Retro vehicle.
Aside from the Size and Fit feeling, the overall impression is price appropriate or a little cheap.
It is a terrible story to compare it with FOR JAPAN MODELS (which I had before) which has a high price, and even if I compare it with FOR JAPAN MODELО (which I still have now) which is comparatively close to the price range, I am defeated in the making and material of the interior Pad. I feel that the cap (in short, the outside part) is also thin. If it is compared with the thing sold in the home-centre, it is easy to win, but...
I think that it is a suitable Manufacturer for the person who likes the flashy Graphic that is in the product Lineup, but I think that it is delicate for other people.
View detail
Will not fit BELL's CUSTOM500
I think the thing is good work.
But unfortunately, CUSTOM500 can not be used for 5 points.
Because it is a Helmet of a foreign thing, it is inevitable.
I was reminded that the 5-point stop Shield will likely not stick unless it is OEM.
View detail
It's cloudy…
Unlike the old competition shield, the 3D shape of the shield hides the chin when viewed from the front! However, because of this, the part where the breath hits the helmet will inevitably fog up It can be managed while driving because the air is released, but what about the fogging after stopping or putting on the Helmet? There is nothing you can do about it You will need to be careful, especially if you use glasses Personally, I prefer the Board Competition View detail
I don't know
As mentioned in picture 1, the paint of FrontCenter was not beautiful If you change the angle, you can see a white circle or something like that As shown in picture 2, even if you change the angle, you can see a circle in the same place, so the paint is not clean may be
I chose the Size LL, but I felt it was a little tight because of the thicker ear area I think the size of the face depends on the individual, so this may not be helpful
I think Design is cool for a casual flare
View detail
I think it is normal.
I bought it using Point.
Color and shape are not cheap as well, but I feel like Small overall.
There was something that did not match what I fits with my Helmet.
I think that some curvature is Bubble and can not be helped.
View detail
It purchased to the exchange from an ARAI's New competition shield. As a 3D bending Shield, it is cheap, and a good point is below the half the sum of the pure above-mentioned Shield.Distortion of a field of view, etc. are not felt and it is thought t
It purchased to the exchange from an ARAI's New competition shield.
As a 3D bending Shield, it is cheap, and a good point is below the half the sum of the pure above-mentioned Shield.Distortion of a field of view, etc. are not felt and it is thought that it is quality enough.I think it kind that the mall for Seals of the
clamp face is attached.The color tone of the
Smoke is thinner than an ARAI's Smoke.Although I thought that
form was largely based on liking, since it was long compared with an ARAI, a feeling of freedom was low, and it felt involvement of a wind large conversely.
I think that I will make it pure again individual next time at the time of exchange.
View detail