Reviews
Mirror shield
The color is dark enough to be used almightily in the evening and in the tunnel, and the color is dark enough to be used at night without any problem. View detail
Looks good
[How is it used?
Jet helmet
Was the one you received as per Image?
Street Image
How was your experience with it?
Large changeable satisfaction
[Points to note]
A little hard to open and close, as if it were incompatible.
How did it compare to other products?
View detail
JacketButton is ….
The visibility was good, but the Crimp on the middle JacketButton came off after one use …. I thought about exchanging it, but unfortunately I will return it because the same event is likely to happen again due to the make. View detail
Small but good looking Parenthesis
The first impression is that the cap is small in size and looks very parenthesis, and the Merit is the largest. It comes with an adhesive sponge for adjusting the dimensions, and I was able to adjust it well enough. Considering the soundproofing effect, I have the impression that it is more suitable for city driving and short distances than for touring. View detail
Good visibility with minimal distortion
Surprisingly good visibility with little distortion, but on the other hand, the reflection of one's face is strong and makes nighttime driving uneasy. The length is a little short, plus the quantity:Pair (for Left and Right) Wind cutting noise and eyes dry out at high speeds due to wind entrainment from the gaps in the View detail
For CUB
I bought this for my CUB, which I use mainly for work.
The helmet for touring is size XL, so I chose size XL as well, but it seemed a little too large.
Ratchet-type buckles are easy when there are many removals and additions.
The color was Ivory, which was darker than expected.
I like it because it has a VINTAGE feel.
I also purchased a Bubble shield from the same manufacturer at the same time, but it feels heavier when the shield is attached.
I use it separately for work.
View detail
Flash mirrorColor:Buy Yellow
Flash mirrorColor:I purchased Yellow, but the Mirror feeling was Zero.
If you want to hide your face, you should choose another color.
View detail
First Bubble shield
Purchase at the same time as the company's Jet helmet
This is my first Bubble shield.
This is my first time, so I don't know about other companies' products, but I think there is a little distortion.
But maybe this is how it is.
It doesn't bother me that much.
Even at night, it doesn't feel so tight.
As I mentioned in the Helmet Review, I feel a little thoughtful when I attach it to the Helmet.
View detail
Wow that's cool
The Matte Black and Graphic finishes are sullen and Parenthesis good.
I wear it when I ride my Harley and it looks perfect.
It is not uncomfortable to wear and does not tire even after long use.
View detail
Any Shield.
In addition to the 72-jam Bubble shield, it can also be used with Universal's Shield for Jet helmets.
Installation is easy and the adhesive surface to the Shield seems strong.
When run, the Shield is properly prevented from lifting.
One drawback is that our Shield has a wobble on the upper hook that makes a grating noise while driving.
View detail
What the hell kind of quality control is that?
This is the second one of the same ManufacturerHelmet, the paint on the helmet is good.
...but otherwise not good at all. The shock absorber and the helmet cap are gapped, and because of the gapping, the inner pad is also gapped. Strange wrinkle is occurring from the beginning. (Lol)
The sense of discomfort felt from the moment the package is opened is intense. It was so bad that I started laughing funny.
In fact, the first one I had purchased previously was in the same condition as this one, and the shock level coverage was intensely Gap.
No way. Two defective products in a row. I wonder if the manufacturer is packing the product with a blindfold on. Even the cheap helmets I bought on the Net for about 7,000 yen were not this bad.
Design is a 0, but everything else sucks except Design. I'm going to write about it in a shitty way this time, because this is the second time in a row.
If you recommend this Level to a friend, your friend will be angry with you. It is a Manufacturer that you should never recommend to others because it may cause a crack in your relationship.
Naturally, I would like to return and exchange the product through Webig. The return shipping fee for this kind of thing is Prepayment The company is a member of the "C" group of the "C" group. Worst.
View detail
Used with ARAIS70
I used to use another manufacturer. This product has a long shield and is very windproof. View detail
I was able to use it for AraiClassic.
I put it on my Arai Classic. I was able to install it without any problems, but the Shield is too stiff to move up and down. You may want to use silicone oil or grease to break it in before you install it. However, it may be that the accuracy of the Button part of the installation was bad by chance only for the one I bought, or it may be that it was just incompatible with my AraiClassic by chance.
I've heard that some bubble shields can distort the view, but this shield didn't bother me. I chose the Clear type because I do a lot of night riding. I think it's inexpensive, so it might be good to have several types depending on your mood and conditions.
View detail
JAM The reinforcing Suction Cup is used exclusively...
First of all, when I bought it, I did not expect the stiffness like ARAI or SHOEI products from the price.
I chose LightGradation blue for the flash mirror, but it looks more like light smoke than gradation, and moreover, it looks more like normal light smoke than blue, is this the manufacturer's standard or Naming? Certainly? But it is the original [Color] Smoke looks like it feels much darker.
There is little distortion and it is easy to see well, and there is no sense of eye fatigue.
The impression of the lack of rigidity as shown in the comments of the past evaluators is unavoidable because the thickness of the Shield itself is thin. However, there is accuracy that is not bad considering this price range, and the impression changes completely by adding the following Parts.
I installed a JAM specific reinforced Suction Cup on both ends of the Shield installation.
With this Suction Cup, the Shield itself has been given a more solid feel, and the usability has been improved. Also, it seems to have been improved to prevent sudden opening and closing on the highway by installing a locking snap.
I tried to run near the speed limit in the highway test section of the new Tomei, but I was able to use it comfortably without any particular problems or troubling scenes.
Anyway, it can be opened and closed, and when the sun is low in the morning or evening, it is possible to prevent sobriety with the eaves, and it gives off an old-fashioned atmosphere with ease. It becomes the form of Helmet that suits Machine.
I thought it would be a good idea to have one of those Helmets that have an atmosphere that allows you to run around town with ease.
It becomes the atmosphere of Helmet that suits especially W, ESTRELLA, and SR GB system Machine well.
Recently, the JAM Helmet has come in handy when I go out after changing the Shield.
View detail
Mirror degree is not strong.
The Jet helmet is a classic and looks great on it.
The drawback is that Shield is fixed, so it's hard to wear.
Shield's Mirror is not very strong and you should expect it to not hide your face.
View detail
There's a lot of work that goes into it.
At first, it looks like just a Suction Cup and the color is Quantity!:It's like being Set.
The color is solid and the Suction Cup is a little thicker and more durable.
At first, I installed the normal opening and closing Shield as it is, and tried opening and closing work, after all, the solid feeling of the initial use is in the Shield, and the shift of the fixed part is easy to occur, and it seems that opening and closing with holding down the fixed part is certain.
Afterwards this Suction CupQuantity:With the Set installed, it feels much more secure, and I can now open and close it securely with one hand, limiting any shifting or movement of the wearing part when opening and closing.
I used it at high speed, but there is no wobble, and it is fixed Firmly, and I think it is the right answer to install it because I can use it without a problem after installation.
I was able to use it quite comfortably with a sense of security at high speed.
In addition, I think that it is Point to fix it in the position that can hold Suction Cup firmly when mounting it.
View detail
Price suitable
I bought this because I wanted a bright white Helmet to go with my Retro vehicle.
Aside from the Size and Fit feeling, the overall impression is price appropriate or a little cheap.
It is a terrible story to compare it with FOR JAPAN MODELS (which I had before) which has a high price, and even if I compare it with FOR JAPAN MODELО (which I still have now) which is comparatively close to the price range, I am defeated in the making and material of the interior Pad. I feel that the cap (in short, the outside part) is also thin. If it is compared with the thing sold in the home-centre, it is easy to win, but...
I think that it is a suitable Manufacturer for the person who likes the flashy Graphic that is in the product Lineup, but I think that it is delicate for other people.
View detail
Will not fit BELL's CUSTOM500
I think the thing is good work.
But unfortunately, CUSTOM500 can not be used for 5 points.
Because it is a Helmet of a foreign thing, it is inevitable.
I was reminded that the 5-point stop Shield will likely not stick unless it is OEM.
View detail
It was more than I expected.
I was using 72jam's Flash mirrorLight smokeCompetition shield, but I decided to use Makeover to make a retractable Bubble shield.
The color of the Shield is Gold which is easy to see even at night from the animation of the homepage of 72jam.
I was worried about the rattling of the Shield and the Wind Cutting noise, but I think it is Level, which I personally do not mind. I was worried about the rattling of the shield and the wind cutting sound, but I think it is the level that I don't mind.
There is no distortion of the field of view that is common with bubble shields.
I think it's the quality of the molding and the shape.
The night vision is also easier to see than the Flash mirrorLight smoke that I used to use.
View detail
Best Design
I was looking for a Small TypeHelmet with a Retro look, but had a hard time finding one I liked.
This Helmet was exactly what I was looking for and I bought it immediately.
View detail