Reviews
Stable KTC
I chose KTC in part because of KTC.
I have been using SIGNET tools for a long time, but I also like KTC as a Brand with stable quality.
Since it is a tool, a reliable Brand is good for mental stability.
View detail
Convenient
We mainly use Hexa for quick turnaround.
Personally, I am still learning about fast turnaround, but once I get used to it, it will save me a lot of maintenance time.
View detail
rapid conversion (e.g. VCR, tape deck, etc.)
Easy to turn by hand, easy to use to turn the Size difference by conversion, but a little difficult to take off when removing.
It's nice because it's compact and doesn't take up much space for in-vehicle use.
View detail
The smallest and lightest Merit is the Large Merit.
I bought this to play with the carburetor part on the go. To be honest, it is cheaply made and hard to turn.
The small size and light weight make it easy to carry around.
If possible, I would have liked to have a part to attach a Key Holder.
View detail
When double nut is not available.
I bought this to pull out the sprocket bolt on my SR400.
The reason why we went to the trouble of purchasing the hub clutch is because the SR400 hub clutch has a convex shape for CenterRinging the Sprocket.
This is because the distance between the convex part and the stud bolt is so close that a double nut cannot be used.
I was wondering if I would have any luck using the OEM Nut since it is so thin. Unfortunately, the second one bites only one pile and cannot hang Torque properly.
I had no choice but to buy a special tool.
Still, it was a bit odd to remove the screws because they were coated with screw locks and mine were very sticky.
Fortunately, since it was a RoseRose, access was possible from the back, so I was able to finally remove it by searing it with a raspene, drilling a hole in the center, and pulling out the Torque.
The structure of the Stud bolt remover consists of three Pieces that move and hold the Bolt when it is rotated.
The structure was like a Cell starterClutch.
The screw threads are held in place by the three pieces of the bolt, either on the face of the screw threads or by a line perpendicular to the screw threads, so the screw threads are crushed. Basically, the removed stud bolt cannot be reused.
Since it is possible to engage the stud bolt in the reverse rotation direction, it is possible to loosen the Opposite Thread Screw or tighten the Normal Thread Screw, but as mentioned earlier, the screw threads will be crushed, so it will be a very special application when used for tightening.
It can be used for round bars as well, since it does not need to be screwed structurally.
Maybe it would be good for a sticking Knock Pin or something.
I purchased For M8 this time, so I can use it for Big bike's Exhaust System and so on.
If you have For M6, I think you will have no problem with most large stud bolts.
View detail
Since it is just going to concern with an engine, it is as a thing of there there.
Since it is just going to concern with an engine, it is as a thing of there there. View detail
It is easy to arrange a price at a low price.
It is easy to arrange a price at a low price. View detail
It is strong and can take a beating.
It seems a little heavy, but its weight is a proof of its strength. The Tray inside is fee Gold expensive for those who don't need it. View detail
Easy to use
KTC's Logo is in large size, excellent in coloring and design, and very parenthesis.
The functionality is excellent, and the high gripping force makes it easy to grip and the tool does not slip, so you can work safely.
View detail
Ratchet is easy to use
It is easy to use because it does not need to be replaced when working in a confined space.
The quality is very good and the Ratchet works efficiently.
It is sturdy and will not break even if a certain amount of Torque is applied.
View detail
It's solid
I use it to transfer tools when I carry them around.
It is convenient because it is easy to hold and has a solid capacity to fit what you need.
The solid construction makes it safe to put heavy tools in it.
View detail
Surprisingly difficult
I bought it because I thought it would be convenient.
Since it is a KTC, the texture is solid and not easily broken.
The grip is also processed to prevent slipping.
It does not slip when turned with greasy hands and is functionally up to par.
Just my opinion after using it.
I'm not sure if it would be dramatically more convenient, but it's quite a hassle to put it on and take it off.
Always use a quantity on the Ratchet Handlebar rather than a Single Body.:Set and then use the
I feel that it will be used by turning it around when it is loose.
I don't suddenly loosen the bolt on the Ratchet Handlebar, and the Ratchet Head is too big to fit in tight places.
The situations in which they are used are currently limited.
Usage may need to be considered.
View detail
Good accuracy
These tools may not be accurate, or they may not come off in anticipation, or they may not be able to come off.
Licking can cause scratches.
This product is so precise, it fits perfectly.
Loosening and tightening can be done very Smoothly.
It is a reliable Brand and will be used for a long time.
View detail
Lightweight and easy to use
[How is it used?
Purchased because I could not find OEM supplied tools.
There is a Rubber inside, and when the tool is pulled out of the Plug hole, the Plug can be pulled out together.
The same is true when installing the plug, which allows the plug to be dropped deep into the hole to minimize the risk of damaging the electrode.
Was the one you received as per Image?
Yes
How was your experience with it?
Easy to use
[Points to note]
None
How did it compare to other products?
Lighter than OEM
▼ Other items that would be helpful include
Is the unit production cost 10 yen?
View detail
Compact
I was looking for a compact and small one to use in a small space, and this one looked good, so I bought it.
The size is a little larger than I expected, but the turning part is nice and usable.
View detail
Slotted screwdriver。
The tip is sharpened and used as a tapping tool. View detail
It depends on the location.
The size is delicate, so the place where it is used is limited. View detail
Subtle Size.
It's not the easiest Size to use, but it depends on where you are. View detail
Buy for additional Socket
I bought it to add additional size to my Socket set. It seems to be a little expensive, but considering that the design and size are perfect, I think that it is unavoidable. 5 all in 1 pc Rail is tough, but if Socket increases in the future, I think that I will buy and use Rail itself. View detail
Although I bought it.
I thought it might be useful.
I'm not sure which scene I'm going to use it for, it's been sitting in my toolbox.
Someday the sun will shine!
View detail