Reviews
Costa bad!
I have the one from Tone and it is convenient, so I bought it to see if there is a difference.
I bought the one from Tone for 800 yen on Amazon, but this one is about 1300 yen.
As for the quality of things, I think Tone is better. (Material is iron over there?).
This is Plastic.
It is marked every 90-degrees, so if you want to tighten angles or if you don't want to use KTC, you can buy this one.
Personally, I prefer tones as a cosmetic and object.
View detail
No Recommendation for general use
FOR JAPAN MODEL MAJORBrandKTC Hex socket Quantity:Set
”You want KTC for now, right” This is the first Hex socket I've purchased.
I often see Socket as ↑ but it didn't work for me.
This is because, as the product description says ”Bit can be replaced”, the Hex part (Black part in the picture) is stopped at Screw and is replaceable.
The tip of the Hex tends to wear out in heavy youth, so I think it's reasonable that it's replaceable.
But when you use it, this screw loosen and Hex part become rattling.
If you retighten it, it will stick firmly again, but after a while, it will rattle again…
Personally, I'm not a heavy youth like the Motorcycle guys, so the Demerit that rattles more than the convenience of being able to change the tip was Large.
So now I'm using another Manufacturer's cast-in? Type Socket is used.
I'm satisfied that it doesn't rattle.
If the tip wears out, I plan to replace the entire Socket with a new one.
As mentioned above, if you're not a heavy youth, Demerit is a larger size than Demerit, so I don't think it's a good product for the general public.
View detail
Failed about 1 year after purchase
The Wrench Torque Pre-Set Type was used, but the Quantity:Because the scale at the time of Set became difficult to see Small, I bought the commodity here which can be confirmed with the liquid crystal display.
I have been using it mainly for the management of the tightening torque of the drain bolt at the time of oil exchange, etc., and the place of a comparatively small torque.
-Good point.
The LCD display is very easy to read.
Even in places where the LCD display is not visible, you can set the target Torque to Quantity in advance.:If it is set, it can be confirmed by sound and light.
Target Torque also Quantity:5pcs. can be memorized and can be switched by simply pressing the Button, so it is convenient.
The Grip part is easy to grip and does not slip, so you can feel secure.
-Bad point.
The batteries drained quickly and I had to replace them four times in one year.
It is a little difficult to understand the Click feeling of Button.
The above is a feeling of use, but the failure that Button was crushed and did not come back occurred in about one year after purchase.
He said it would cost at least 6,000 yen or more to repair.
I would like to continue to use the Torque wrench, but if this failure were to occur once a year, the cost performance would be poor, so I decided to purchase a new pre-set type.
I think this is a great product for those who use it infrequently, but not for those who use it on a daily basis.
View detail
To regrettable shopping ...
I am using the Air valve core driver of DRC, but I have purchased this thing because this thing is KTC when I am exploring what is for carrying.. I immediately tried to use it when exchanging the Tire, but it has become a product that is completely dissatisfied with having it at all. First, although it is a part of the handle to rotate, because it is wide, it makes it hard to move your hand to use with Spoke wheel. And, although it is the part turning Valve, since KTC 's thing can not turn unless Valve is pushed in, air will leak when turning. If you are using this product please try using DRC's. I understand the difference. View detail
Difficult to use, intriguing
I can not get power. I have used it because there are occasions when it is inconvenient, but it is hard to use.
There is a dent that Ratchet fits or there is room to consider as a tool to devise a slip prevention shape or a tool.
When using, I use Grip 's good gloves to keep the power from slipping. Recommendation on this usage.
View detail
Slide except
I bought it with Ratchet I want to tighten it from loose state which Bolt is not tightened. If there is Spinna there is not much difference, so please try using those who have never used it.
Just slip on the resin but there is slip more than I expected though Grease and oil. Also working with hands and gloves in the winter.
Since there are quite a thickness and a large size, too, the Ratchet of the Compact head protrudes too big and the narrow part is not good..
Performance, more convenient is the value of the tool, but now I am using Spin Na which was Knurl-processed with Tone's Aluminum at Main.
View detail
It purchases in order to carry for the Touring of Tomari. It fastens to the Rear carrier and is carrying. There is also much Pocket, there is, enters variously, and is convenient. Shin Tokiyasu in emergency.
It purchases in order to carry for the Touring of Tomari.
It fastens to the
Rear carrier and is carrying.
There is also much
Pocket, there is, enters variously, and is convenient.
Shin Tokiyasu in emergency.
View detail
He has bought it by mistake.What was necessary was to often see the Size and just to have bought it.The things are wonderful goods.
He has bought it by mistake.What was necessary was to often see the
Size and just to have bought it.The
things are wonderful goods.
View detail
Smaller than imagination, in one set or Drivers, a tool Tool is the shin without entering. The key is attached and it is convenient to carry. It may say for arranging a little tool.
Smaller than imagination, in one set or Drivers, a tool Tool is the shin without entering.
The
key is attached and it is convenient to carry.
It may say for arranging a little tool.
View detail